22 Manufacturing jobs in Sungai Petani
Manufacturing Engineer
Butterworth, Pulau Pinang
BizLink Technology (S.E.A.) Sdn. Bhd.
Posted 2 days ago
Job Viewed
Job Description
Human Resources Executive @ BizLink Technology Responsibilities:
Product Quotation Request (PQR)
Assessing project feasibility through product drawing and B.O.M review. (including built cycle time, avaibility of tools & equipment, non-recurring engineering (NRE) cost etc.)
Set up the bill of materials (B.O.M) for the request for quotation (RFQ) stage in the Agile system.
Receive Customer Request Form (CRF)
Establishing System Bill of Materials (B.O.M)
Maintaining routing in SAP system
Reviewing and preparing digital harness board drawing
Reviewing and submitting Technical Queries (TQ)
Managing project needs with customers, suppliers, and vendors.
FAI Sample Preparation
Handle all technical queries (TQ) related to sample build.
Ensure readiness of OI/CP/FMEA/General standards in the Agile system.
Generate Control Plans (CP) and conduct Failure Mode Effect Analysis (FMEA)
Prepare and review First Article Inspection Reports (FAIR) for customer approval
Others
Provide regular reports on engineering-related key performance indicators (KPIs) and other KPIs assigned by Management on a weekly and monthly basis to both the departmental Head of Department (HOD) and the corporate office.
Fulfill any additional responsibilities as directed by the HOD or direct superior as needed.
Take the initiative to launch improvement projects or activities that aim to expedite engineering tasks.
Requirements:
Applicants must possess at least a degree in Electrical & Electronic/Mechanical field of qualification.
Fresh graduates or individuals with working experience in the Manufacturing Industry are strongly encouraged to apply.
Proficiency in Google, MS Office, and AutoCAD is mandatory.
Candidates should demonstrate responsibility, dedication, and the ability to work under tight schedules with minimal supervision.
Candidates who are fluent in Mandarin are preferred because the role requires candidates to interact with Mandarin-speaker
Seniority level
Entry level
Employment type
Full-time
Job function
Manufacturing
Industries
Appliances, Electrical, and Electronics Manufacturing
#J-18808-Ljbffr
Product Quotation Request (PQR)
Assessing project feasibility through product drawing and B.O.M review. (including built cycle time, avaibility of tools & equipment, non-recurring engineering (NRE) cost etc.)
Set up the bill of materials (B.O.M) for the request for quotation (RFQ) stage in the Agile system.
Receive Customer Request Form (CRF)
Establishing System Bill of Materials (B.O.M)
Maintaining routing in SAP system
Reviewing and preparing digital harness board drawing
Reviewing and submitting Technical Queries (TQ)
Managing project needs with customers, suppliers, and vendors.
FAI Sample Preparation
Handle all technical queries (TQ) related to sample build.
Ensure readiness of OI/CP/FMEA/General standards in the Agile system.
Generate Control Plans (CP) and conduct Failure Mode Effect Analysis (FMEA)
Prepare and review First Article Inspection Reports (FAIR) for customer approval
Others
Provide regular reports on engineering-related key performance indicators (KPIs) and other KPIs assigned by Management on a weekly and monthly basis to both the departmental Head of Department (HOD) and the corporate office.
Fulfill any additional responsibilities as directed by the HOD or direct superior as needed.
Take the initiative to launch improvement projects or activities that aim to expedite engineering tasks.
Requirements:
Applicants must possess at least a degree in Electrical & Electronic/Mechanical field of qualification.
Fresh graduates or individuals with working experience in the Manufacturing Industry are strongly encouraged to apply.
Proficiency in Google, MS Office, and AutoCAD is mandatory.
Candidates should demonstrate responsibility, dedication, and the ability to work under tight schedules with minimal supervision.
Candidates who are fluent in Mandarin are preferred because the role requires candidates to interact with Mandarin-speaker
Seniority level
Entry level
Employment type
Full-time
Job function
Manufacturing
Industries
Appliances, Electrical, and Electronics Manufacturing
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
0
Manufacturing Specialist
Butterworth, Pulau Pinang
Molex
Posted 2 days ago
Job Viewed
Job Description
Manufacturing Specialist
at
Molex Location: Gelang Patah, Johor (Malaysia) Overview
As a Manufacturing Specialist, your primary purpose is to ensure the smooth operation of production lines by solving abnormalities swiftly and effectively. You will regularly coordinate with engineers to continually improve product quality and process efficiency. What You Will Do
Identify and resolve technical problems on the production floor, providing necessary support to maintain continuous production. Collect and analyze data to enhance production processes, increase product pass rates, and minimize waste. Interpret customer specifications and documents into actionable instructions for the production team. Monitor special product runs and sample orders, oversee production status, and exert control to meet schedule demands. Assess and elevate the proficiency of production staff through continuous improvement of processes. Create and maintain accurate process documentation, ensuring adherence to company standards and conducting relevant training. Who You Are (Basic Qualifications)
You have completed Senior High School or possess a Diploma. Analytical capabilities to identify issues within production and suggest viable improvements. Strong communication skills to convey ideas effectively and interact constructively with colleagues. What Will Put You Ahead
At least 2 years of practical experience related to production. Well-versed in process flows and technical aspects of production lines. At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided depending on each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Who We Are
As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.
#J-18808-Ljbffr
at
Molex Location: Gelang Patah, Johor (Malaysia) Overview
As a Manufacturing Specialist, your primary purpose is to ensure the smooth operation of production lines by solving abnormalities swiftly and effectively. You will regularly coordinate with engineers to continually improve product quality and process efficiency. What You Will Do
Identify and resolve technical problems on the production floor, providing necessary support to maintain continuous production. Collect and analyze data to enhance production processes, increase product pass rates, and minimize waste. Interpret customer specifications and documents into actionable instructions for the production team. Monitor special product runs and sample orders, oversee production status, and exert control to meet schedule demands. Assess and elevate the proficiency of production staff through continuous improvement of processes. Create and maintain accurate process documentation, ensuring adherence to company standards and conducting relevant training. Who You Are (Basic Qualifications)
You have completed Senior High School or possess a Diploma. Analytical capabilities to identify issues within production and suggest viable improvements. Strong communication skills to convey ideas effectively and interact constructively with colleagues. What Will Put You Ahead
At least 2 years of practical experience related to production. Well-versed in process flows and technical aspects of production lines. At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided depending on each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Who We Are
As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
1
Manufacturing Manager
Butterworth, Pulau Pinang
BizLink Technology (S.E.A.) Sdn. Bhd.
Posted 10 days ago
Job Viewed
Job Description
Key Responsibilities: 1. Production & Assembly Management Plan, schedule, and manage daily assembly operations for complex semiconductor equipment. Ensure production output meets design specifications, quality standards, and delivery timelines. Coordinate with Planning, Engineering, QA, and Logistics to ensure alignment on production goals. Monitor WIP (Work-In-Progress) and bottlenecks, taking corrective actions to avoid delays. 2. People Management Lead, train, and motivate a team of supervisors, technicians, and assemblers. Manage team performance, set clear KPIs, and conduct regular performance reviews. Promote a culture of discipline, safety, accountability, and teamwork. 3. Quality & Compliance Implement and maintain rigorous in-process quality checks and final testing standards. Work closely with QA to resolve non-conformance issues and implement corrective actions. Support internal and customer audits as required. 4. Continuous Improvement Identify opportunities for process improvement using lean manufacturing, 6S, and Kaizen. Drive cost reduction initiatives through process optimization, scrap reduction, and yield improvement. Collaborate with Engineering on design-for-manufacturing (DFM) improvements. 5. Equipment and Resource Management Ensure availability and maintenance of assembly tools, jigs, fixtures, and equipment. Oversee material usage and inventory control in coordination with warehouse and material teams. Support the implementation of MES or ERP systems for better tracking and control. Requirements: Education: Bachelor's Degree in Mechanical/Electrical/Mechatronics Engineering or related discipline. Experience: Minimum 7 years of experience in production/assembly, with at least 3 years in a managerial or supervisory role. Experience in semiconductor capital equipment manufacturing or high-tech system integration is
highly preferred . Technical Skills: Strong understanding of mechanical and electrical assembly processes. Familiarity with cleanroom requirements, vacuum systems, motion control, or robotics is a plus. Proficiency in ERP/MES systems. Soft Skills: Excellent leadership and team management skills. Strong problem-solving and decision-making capabilities. Effective communicator with cross-functional coordination skills. Hands-on, results-driven, and adaptable to a fast-paced environment.
#J-18808-Ljbffr
highly preferred . Technical Skills: Strong understanding of mechanical and electrical assembly processes. Familiarity with cleanroom requirements, vacuum systems, motion control, or robotics is a plus. Proficiency in ERP/MES systems. Soft Skills: Excellent leadership and team management skills. Strong problem-solving and decision-making capabilities. Effective communicator with cross-functional coordination skills. Hands-on, results-driven, and adaptable to a fast-paced environment.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
2
Product Manufacturing Engineer
Permatang Pauh
SCHOTT
Posted 24 days ago
Job Viewed
Job Description
About us
With a product portfolio of over 120 optical glasses, ceramic converters, high-precision optical components and wafers SCHOTTs business unit Advanced Optics develops customized solutions for applications in optics, lithography, astronomy, opto-electronics, life sciences, research, and more.
Beyond that, we are serving augmented reality innovators worldwide as the leading provider of waveguide materials, leveraging our international production network and engineering hubs in Germany, Switzerland, China and Malaysia to enable the emerging Metaverse. As we are fully committed to bringing augmented reality technology to the public, we are currently expanding our manufacturing capacity in Malaysia.
You want to be part of it? Then apply now.
Your Contribution- Responsible to drive yield improvements within the product development and NPI phase for new optical components.
- Responsible to achieve target cost, target performance and target quality for new products which are handed over from R&D to high volume production.
- In charge to drive overall yield improvement roadmaps in order to achieve and exceed target yields for new optical components
- Responsible to do detailed yield loss analysis and pareto with statistical data methods.
- Planning product development and customer builds, summarizing and validating these build results during the NPI and ramp phase
- Establish & maintain all product related documentation.
- Work cross-functionally with multiple groups including Design, Product Engineering, Process Integration, Process Development, NPI, Modeling, Failure Analysis, Quality and Production teams to identify, drive and resolve issues.
- BSc/MSC/Ph.D Degree in Mechatronics / Electronic Engineering / Photonics / Physics / Optics.
- Min 5 year experience in the field of yield engineering, process integration, product engineering within the semiconductor or optical industry.
- Excellent communication, organizational, and team building skills.
- Target driven personality with high execution focus.
- Proficiency with data analysis, DOE, and statistical techniques.
- Problem solving methods
SCHOTT’s openness to promote your further development is just as great as our additional benefits. Ranging from active health management via flexible working hours and hybrid work all the way to corporate pension plans: everything geared to suit your goals and needs. Discover a special corporate culture where everyone has the opportunity to develop their entire potential.
At SCHOTT, you can expect a unique corporate culture where we emphasize equity, diversity, and inclusion. We know: motivated and committed employees are the precondition for the success of our company.
Multiple career opportunities; Medical, Dental and Vision coverage; Talent development; paid vacation days, holidays and sick time
Please feel free to contact usYou can expect interesting tasks and challenging projects, as well as motivated and friendly teams in fields that influence our future. Do you want to be successful with us? Then, please send us your application: SCHOTT Glass (Malaysia) Sdn. Bhd., Human Resources, Wendy Wang
*At SCHOTT, it’s your personality that counts – not your gender, your identity, or origin.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
3
MANUFACTURING TECHNICIAN V
Butterworth, Pulau Pinang
TE Connectivity Corporation
Posted today
Job Viewed
Job Description
Press Tab to Move to Skip to Content Link Select how often (in days) to receive an alert: Select how often (in days) to receive an alert: At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.
Job Overview
Manufactures and assembles various products per established facility processes, troubleshoots problems and performs maintenance of complex equipment. Job Description
RESPONSIBILITIES • Perform evaluations and/or analyze unique problems that are new to equipment. • Perform predictive maintenance by analyzing routine failures and determining adjustments and repairs that need to be made. • Perform training as needed to Lower-level Maintenance Techs on troubleshooting and repair techniques utilized with equipment • Perform specified preventative maintenance on production equipment to prevent equipment downtime. • Monitor equipment operations to ensure proper usage. • Construct and/or assemble new equipment. • Troubleshoot equipment failures and repair as needed. • Perform specified preventative maintenance on production equipment to prevent equipment down-time. • Perform Lock Out / Tag Out requirements. • Help repairing on hydraulic, pneumatic and electromechanical systems. • Perform other duties as assigned or necessary to meet business conditions or changes. • Adheres to quality and safety systems or maintenance of quality and safety standards. • Analyze and improve existing products, equipment, processes as assigned. • Develop manufacturing methods and processes in the production of components and methods to reduce manufacturing costs. • Investigate, establish and implement requirements for equipment, tooling, and methods of manufacturing. • Participate in cost reduction and cost of quality programs. • Assist manufacturing engineer in solving production constraints. • Support production through independent review, root cause analysis, corrective action, discrepancy handling, and defect prevention. REQUIREMENTS • Good communication skills, both oral and written. • Ability to work independently. • Working knowledge of Microsoft Windows. • Must have good or corrected eyesight to ensure quality of work. • Strong practical technical ability. • Good mechanical aptitude and troubleshooting ability. • Ability to work in a fast-paced environment. EDUCATION / EXPERIENCE • Associate Diploma in a technical discipline or equivalent experience. • 5+ years of experience in injection molding maintenance, or mechanical, hydraulic, pneumatic and electrical repair. What your background should look like
Typically requires 5-6 years or more of related work experience. Requires high school diploma. Completion of an AA degree or equivalent is preferred. Competencies
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork Location: Prai, Penang, 07, MY, 13600
State: 07 Country/Region: MY Travel: None Requisition ID: Alternative Locations:
Job Segment:
Hydraulics, Facilities, Maintenance, Manufacturing Engineer, Engineer, Engineering, Operations, Manufacturing Provider Description Enabled SAP as service provider "route" is used for session stickiness "careerSiteCompanyId" is used to send the request to the correct data center "JSESSIONID" is placed on the visitor's device during the session so the server can identify the visitor Provider Description Enabled YouTube Provider Description Enabled LinkedIn
#J-18808-Ljbffr
Job Overview
Manufactures and assembles various products per established facility processes, troubleshoots problems and performs maintenance of complex equipment. Job Description
RESPONSIBILITIES • Perform evaluations and/or analyze unique problems that are new to equipment. • Perform predictive maintenance by analyzing routine failures and determining adjustments and repairs that need to be made. • Perform training as needed to Lower-level Maintenance Techs on troubleshooting and repair techniques utilized with equipment • Perform specified preventative maintenance on production equipment to prevent equipment downtime. • Monitor equipment operations to ensure proper usage. • Construct and/or assemble new equipment. • Troubleshoot equipment failures and repair as needed. • Perform specified preventative maintenance on production equipment to prevent equipment down-time. • Perform Lock Out / Tag Out requirements. • Help repairing on hydraulic, pneumatic and electromechanical systems. • Perform other duties as assigned or necessary to meet business conditions or changes. • Adheres to quality and safety systems or maintenance of quality and safety standards. • Analyze and improve existing products, equipment, processes as assigned. • Develop manufacturing methods and processes in the production of components and methods to reduce manufacturing costs. • Investigate, establish and implement requirements for equipment, tooling, and methods of manufacturing. • Participate in cost reduction and cost of quality programs. • Assist manufacturing engineer in solving production constraints. • Support production through independent review, root cause analysis, corrective action, discrepancy handling, and defect prevention. REQUIREMENTS • Good communication skills, both oral and written. • Ability to work independently. • Working knowledge of Microsoft Windows. • Must have good or corrected eyesight to ensure quality of work. • Strong practical technical ability. • Good mechanical aptitude and troubleshooting ability. • Ability to work in a fast-paced environment. EDUCATION / EXPERIENCE • Associate Diploma in a technical discipline or equivalent experience. • 5+ years of experience in injection molding maintenance, or mechanical, hydraulic, pneumatic and electrical repair. What your background should look like
Typically requires 5-6 years or more of related work experience. Requires high school diploma. Completion of an AA degree or equivalent is preferred. Competencies
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork Location: Prai, Penang, 07, MY, 13600
State: 07 Country/Region: MY Travel: None Requisition ID: Alternative Locations:
Job Segment:
Hydraulics, Facilities, Maintenance, Manufacturing Engineer, Engineer, Engineering, Operations, Manufacturing Provider Description Enabled SAP as service provider "route" is used for session stickiness "careerSiteCompanyId" is used to send the request to the correct data center "JSESSIONID" is placed on the visitor's device during the session so the server can identify the visitor Provider Description Enabled YouTube Provider Description Enabled LinkedIn
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
4
MANUFACTURING ENGINEERING MANAGER
Butterworth, Pulau Pinang
TE Connectivity Corporation
Posted 4 days ago
Job Viewed
Job Description
Press Tab to Move to Skip to Content Link Select how often (in days) to receive an alert: Select how often (in days) to receive an alert: At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.
Job Overview
Lead and manage manufacturing engineering
with the objective
of ensuring on time and successful delivery of the projects and provision of effective support to new business
within
TE operation and engineering plan and budget. Job Requirements
Manufacturing Engineering Develop advanced process technology; review automation project, Cost saving project; review new sample making reports; and provide technical support to key project in order to effectively support production and business development. Develop, evaluate, and improve manufacturing methods, processes, and workflows.
Implement Lean Manufacturing and continuous improvement initiatives.
Collaborate with design and quality teams on new product introductions.
Ensure equipment, tooling, and facilities are optimized for productivity and safety.
Troubleshoot production issues and recommend corrective actions.
Conduct time and motion studies and establish standard operating procedures (SOPs).
Monitor and analyze production data to identify trends and areas for improvement.
Ensure compliance with safety, quality, and regulatory standards.
Coordinate with vendors and suppliers for materials, tools, and machinery.
Provide training and technical support to production staff.
Planning and Budgeting Develop and implement section budget and plan, and monitor the achievement of the budget in order to achieve targeted department performance. Policies and Procedures Implement new global product development policies, procedures and systems; and maintain and develop local product development policies, procedures in order to meet TE's global requirements. People Management & Development Allocate and balance the allocation of work across direct reports; review and provide timely performance feedback to direct reports; mentor, develop and motivate them; help resolve people/functional issues in the team in order to achieve targeted performance and retain key talent. Asset Management Manage fixed asset and find new opportunity to reuse idle asset on new project in order to reduce product cost. What your background should look like
Bachelor's Degree with engineering and sciences in Mechanical, electrical & electronic, IE; 12 - 15 years cable assembly working experience including 5 years management experience. Competencies
SET : Strategy, Execution, Talent (for managers) Location: Prai, Penang, 07, MY, 13600
State: 07 Country/Region: MY Travel: 10% to 25% Requisition ID: Alternative Locations:
Job Segment:
Manufacturing Engineer, Engineering Manager, Compliance, Engineer, Industrial, Engineering, Legal, Manufacturing Provider Description Enabled SAP as service provider "route" is used for session stickiness "careerSiteCompanyId" is used to send the request to the correct data center "JSESSIONID" is placed on the visitor's device during the session so the server can identify the visitor Provider Description Enabled YouTube Provider Description Enabled LinkedIn
#J-18808-Ljbffr
Job Overview
Lead and manage manufacturing engineering
with the objective
of ensuring on time and successful delivery of the projects and provision of effective support to new business
within
TE operation and engineering plan and budget. Job Requirements
Manufacturing Engineering Develop advanced process technology; review automation project, Cost saving project; review new sample making reports; and provide technical support to key project in order to effectively support production and business development. Develop, evaluate, and improve manufacturing methods, processes, and workflows.
Implement Lean Manufacturing and continuous improvement initiatives.
Collaborate with design and quality teams on new product introductions.
Ensure equipment, tooling, and facilities are optimized for productivity and safety.
Troubleshoot production issues and recommend corrective actions.
Conduct time and motion studies and establish standard operating procedures (SOPs).
Monitor and analyze production data to identify trends and areas for improvement.
Ensure compliance with safety, quality, and regulatory standards.
Coordinate with vendors and suppliers for materials, tools, and machinery.
Provide training and technical support to production staff.
Planning and Budgeting Develop and implement section budget and plan, and monitor the achievement of the budget in order to achieve targeted department performance. Policies and Procedures Implement new global product development policies, procedures and systems; and maintain and develop local product development policies, procedures in order to meet TE's global requirements. People Management & Development Allocate and balance the allocation of work across direct reports; review and provide timely performance feedback to direct reports; mentor, develop and motivate them; help resolve people/functional issues in the team in order to achieve targeted performance and retain key talent. Asset Management Manage fixed asset and find new opportunity to reuse idle asset on new project in order to reduce product cost. What your background should look like
Bachelor's Degree with engineering and sciences in Mechanical, electrical & electronic, IE; 12 - 15 years cable assembly working experience including 5 years management experience. Competencies
SET : Strategy, Execution, Talent (for managers) Location: Prai, Penang, 07, MY, 13600
State: 07 Country/Region: MY Travel: 10% to 25% Requisition ID: Alternative Locations:
Job Segment:
Manufacturing Engineer, Engineering Manager, Compliance, Engineer, Industrial, Engineering, Legal, Manufacturing Provider Description Enabled SAP as service provider "route" is used for session stickiness "careerSiteCompanyId" is used to send the request to the correct data center "JSESSIONID" is placed on the visitor's device during the session so the server can identify the visitor Provider Description Enabled YouTube Provider Description Enabled LinkedIn
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
5
Manufacturing Engineering Manager
Butterworth, Pulau Pinang
AMETEK
Posted 12 days ago
Job Viewed
Job Description
Job Title: Manufacturing Engineering Manager
Location: Penang, MY, 11900 Business Unit: Haydon Kerk Pittman Posting Date: Mar 6, 2025 A manufacturing engineering manager is responsible for the overall function of the manufacturing processes for a company. In this role, you need to lead the Manufacturing Engineering Department, which includes New Product Introduction, new line setup, product transfer, process development and optimization, continuous improvement, engineering change control, etc. What you will do: Lead the Manufacturing Engineering Department, which includes New Product Introduction, new line setup, product transfer, process development and optimization, continuous improvement, engineering change control, etc. Work with product engineers/tooling team to define manufacturing processes. Work with all relevant functions to ensure manufacturing line readiness. Provide ME support to operations for smooth day-to-day manufacturing and continuous improvement. OEE (Operation Efficiency) improvement (ie. up-time, throughput, scrap rate, etc.) Identify and drive OPEX Labor savings projects to support annual cost savings budget. Facilitate Kaizen events and other Lean activities for continuous improvement. Actively support new business pursuit by participating in the design phase and leading the manufacturing phase of the Product Development Process (Phase/Gate). Drive standardization of manufacturing processes. Lead automation for new and existing programs. Responsible for team capability growth. Define manufacturing process technology roadmap. Conduct training/coaching of MEs. Manage the conflict between customer program execution and standard product capability growth. Define ME KPIs and review them regularly. Other assigned tasks. We are looking for: Bachelor's degree, major in mechanical engineering, mechatronics, or automation. Strong communication skills. Excellent oral and written English skills. 10+ years of experience in manufacturing engineering, preferably in CNC precision part machining and electro-mechanical part assembly environment. 5+ years of NPI and engineering management experience (leading people experience). Expertise with Lean / Six Sigma Manufacturing, 5S, and Root Cause Analysis. Familiarity with quality systems such as ISO9001/QS9000/IATF16949. Motor manufacturing experience is a plus.
#J-18808-Ljbffr
Location: Penang, MY, 11900 Business Unit: Haydon Kerk Pittman Posting Date: Mar 6, 2025 A manufacturing engineering manager is responsible for the overall function of the manufacturing processes for a company. In this role, you need to lead the Manufacturing Engineering Department, which includes New Product Introduction, new line setup, product transfer, process development and optimization, continuous improvement, engineering change control, etc. What you will do: Lead the Manufacturing Engineering Department, which includes New Product Introduction, new line setup, product transfer, process development and optimization, continuous improvement, engineering change control, etc. Work with product engineers/tooling team to define manufacturing processes. Work with all relevant functions to ensure manufacturing line readiness. Provide ME support to operations for smooth day-to-day manufacturing and continuous improvement. OEE (Operation Efficiency) improvement (ie. up-time, throughput, scrap rate, etc.) Identify and drive OPEX Labor savings projects to support annual cost savings budget. Facilitate Kaizen events and other Lean activities for continuous improvement. Actively support new business pursuit by participating in the design phase and leading the manufacturing phase of the Product Development Process (Phase/Gate). Drive standardization of manufacturing processes. Lead automation for new and existing programs. Responsible for team capability growth. Define manufacturing process technology roadmap. Conduct training/coaching of MEs. Manage the conflict between customer program execution and standard product capability growth. Define ME KPIs and review them regularly. Other assigned tasks. We are looking for: Bachelor's degree, major in mechanical engineering, mechatronics, or automation. Strong communication skills. Excellent oral and written English skills. 10+ years of experience in manufacturing engineering, preferably in CNC precision part machining and electro-mechanical part assembly environment. 5+ years of NPI and engineering management experience (leading people experience). Expertise with Lean / Six Sigma Manufacturing, 5S, and Root Cause Analysis. Familiarity with quality systems such as ISO9001/QS9000/IATF16949. Motor manufacturing experience is a plus.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
Be The First To Know
About the latest Manufacturing Jobs in Sungai Petani !
6
Product Manufacturing Engineer
Butterworth, Pulau Pinang
SCHOTT
Posted 12 days ago
Job Viewed
Job Description
About us With a product portfolio of over 120 optical glasses, ceramic converters, high-precision optical components and wafers SCHOTTs business unit Advanced Optics develops customized solutions for applications in optics, lithography, astronomy, opto-electronics, life sciences, research, and more. Beyond that, we are serving augmented reality innovators worldwide as the leading provider of waveguide materials, leveraging our international production network and engineering hubs in Germany, Switzerland, China and Malaysia to enable the emerging Metaverse. As we are fully committed to bringing augmented reality technology to the public, we are currently expanding our manufacturing capacity in Malaysia. You want to be part of it? Then apply now. Your Contribution
Responsible to drive yield improvements within the product development and NPI phase for new optical components. Responsible to achieve target cost, target performance and target quality for new products which are handed over from R&D to high volume production. In charge to drive overall yield improvement roadmaps in order to achieve and exceed target yields for new optical components Responsible to do detailed yield loss analysis and pareto with statistical data methods. Planning product development and customer builds, summarizing and validating these build results during the NPI and ramp phase Establish & maintain all product related documentation. Work cross-functionally with multiple groups including Design, Product Engineering, Process Integration, Process Development, NPI, Modeling, Failure Analysis, Quality and Production teams to identify, drive and resolve issues. Your Profile
BSc/MSC/Ph.D Degree in Mechatronics / Electronic Engineering / Photonics / Physics / Optics. Min 5 year experience in the field of yield engineering, process integration, product engineering within the semiconductor or optical industry. Excellent communication, organizational, and team building skills. Target driven personality with high execution focus. Proficiency with data analysis, DOE, and statistical techniques. Problem solving methods Your Benefits SCHOTT’s openness to promote your further development is just as great as our additional benefits. Ranging from active health management via flexible working hours and hybrid work all the way to corporate pension plans: everything geared to suit your goals and needs. Discover a special corporate culture where everyone has the opportunity to develop their entire potential. At SCHOTT, you can expect a unique corporate culture where we emphasize equity, diversity, and inclusion. We know: motivated and committed employees are the precondition for the success of our company. Multiple career opportunities; Medical, Dental and Vision coverage; Talent development; paid vacation days, holidays and sick time Please feel free to contact us You can expect interesting tasks and challenging projects, as well as motivated and friendly teams in fields that influence our future. Do you want to be successful with us? Then, please send us your application: SCHOTT Glass (Malaysia) Sdn. Bhd., Human Resources, Wendy Wang *At SCHOTT, it’s your personality that counts – not your gender, your identity, or origin.
#J-18808-Ljbffr
Responsible to drive yield improvements within the product development and NPI phase for new optical components. Responsible to achieve target cost, target performance and target quality for new products which are handed over from R&D to high volume production. In charge to drive overall yield improvement roadmaps in order to achieve and exceed target yields for new optical components Responsible to do detailed yield loss analysis and pareto with statistical data methods. Planning product development and customer builds, summarizing and validating these build results during the NPI and ramp phase Establish & maintain all product related documentation. Work cross-functionally with multiple groups including Design, Product Engineering, Process Integration, Process Development, NPI, Modeling, Failure Analysis, Quality and Production teams to identify, drive and resolve issues. Your Profile
BSc/MSC/Ph.D Degree in Mechatronics / Electronic Engineering / Photonics / Physics / Optics. Min 5 year experience in the field of yield engineering, process integration, product engineering within the semiconductor or optical industry. Excellent communication, organizational, and team building skills. Target driven personality with high execution focus. Proficiency with data analysis, DOE, and statistical techniques. Problem solving methods Your Benefits SCHOTT’s openness to promote your further development is just as great as our additional benefits. Ranging from active health management via flexible working hours and hybrid work all the way to corporate pension plans: everything geared to suit your goals and needs. Discover a special corporate culture where everyone has the opportunity to develop their entire potential. At SCHOTT, you can expect a unique corporate culture where we emphasize equity, diversity, and inclusion. We know: motivated and committed employees are the precondition for the success of our company. Multiple career opportunities; Medical, Dental and Vision coverage; Talent development; paid vacation days, holidays and sick time Please feel free to contact us You can expect interesting tasks and challenging projects, as well as motivated and friendly teams in fields that influence our future. Do you want to be successful with us? Then, please send us your application: SCHOTT Glass (Malaysia) Sdn. Bhd., Human Resources, Wendy Wang *At SCHOTT, it’s your personality that counts – not your gender, your identity, or origin.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
7
Product Manufacturing Engineer
Permatang Pauh
SCHOTT
Posted 12 days ago
Job Viewed
Job Description
About us With a product portfolio of over 120 optical glasses, ceramic converters, high-precision optical components and wafers SCHOTTs business unit Advanced Optics develops customized solutions for applications in optics, lithography, astronomy, opto-electronics, life sciences, research, and more. Beyond that, we are serving augmented reality innovators worldwide as the leading provider of waveguide materials, leveraging our international production network and engineering hubs in Germany, Switzerland, China and Malaysia to enable the emerging Metaverse. As we are fully committed to bringing augmented reality technology to the public, we are currently expanding our manufacturing capacity in Malaysia. You want to be part of it? Then apply now. Your Contribution
Responsible to drive yield improvements within the product development and NPI phase for new optical components. Responsible to achieve target cost, target performance and target quality for new products which are handed over from R&D to high volume production. In charge to drive overall yield improvement roadmaps in order to achieve and exceed target yields for new optical components Responsible to do detailed yield loss analysis and pareto with statistical data methods. Planning product development and customer builds, summarizing and validating these build results during the NPI and ramp phase Establish & maintain all product related documentation. Work cross-functionally with multiple groups including Design, Product Engineering, Process Integration, Process Development, NPI, Modeling, Failure Analysis, Quality and Production teams to identify, drive and resolve issues. Your Profile
BSc/MSC/Ph.D Degree in Mechatronics / Electronic Engineering / Photonics / Physics / Optics. Min 5 year experience in the field of yield engineering, process integration, product engineering within the semiconductor or optical industry. Excellent communication, organizational, and team building skills. Target driven personality with high execution focus. Proficiency with data analysis, DOE, and statistical techniques. Problem solving methods Your Benefits SCHOTT’s openness to promote your further development is just as great as our additional benefits. Ranging from active health management via flexible working hours and hybrid work all the way to corporate pension plans: everything geared to suit your goals and needs. Discover a special corporate culture where everyone has the opportunity to develop their entire potential. At SCHOTT, you can expect a unique corporate culture where we emphasize equity, diversity, and inclusion. We know: motivated and committed employees are the precondition for the success of our company. Multiple career opportunities; Medical, Dental and Vision coverage; Talent development; paid vacation days, holidays and sick time Please feel free to contact us You can expect interesting tasks and challenging projects, as well as motivated and friendly teams in fields that influence our future. Do you want to be successful with us? Then, please send us your application: SCHOTT Glass (Malaysia) Sdn. Bhd., Human Resources, Wendy Wang *At SCHOTT, it’s your personality that counts – not your gender, your identity, or origin.
#J-18808-Ljbffr
Responsible to drive yield improvements within the product development and NPI phase for new optical components. Responsible to achieve target cost, target performance and target quality for new products which are handed over from R&D to high volume production. In charge to drive overall yield improvement roadmaps in order to achieve and exceed target yields for new optical components Responsible to do detailed yield loss analysis and pareto with statistical data methods. Planning product development and customer builds, summarizing and validating these build results during the NPI and ramp phase Establish & maintain all product related documentation. Work cross-functionally with multiple groups including Design, Product Engineering, Process Integration, Process Development, NPI, Modeling, Failure Analysis, Quality and Production teams to identify, drive and resolve issues. Your Profile
BSc/MSC/Ph.D Degree in Mechatronics / Electronic Engineering / Photonics / Physics / Optics. Min 5 year experience in the field of yield engineering, process integration, product engineering within the semiconductor or optical industry. Excellent communication, organizational, and team building skills. Target driven personality with high execution focus. Proficiency with data analysis, DOE, and statistical techniques. Problem solving methods Your Benefits SCHOTT’s openness to promote your further development is just as great as our additional benefits. Ranging from active health management via flexible working hours and hybrid work all the way to corporate pension plans: everything geared to suit your goals and needs. Discover a special corporate culture where everyone has the opportunity to develop their entire potential. At SCHOTT, you can expect a unique corporate culture where we emphasize equity, diversity, and inclusion. We know: motivated and committed employees are the precondition for the success of our company. Multiple career opportunities; Medical, Dental and Vision coverage; Talent development; paid vacation days, holidays and sick time Please feel free to contact us You can expect interesting tasks and challenging projects, as well as motivated and friendly teams in fields that influence our future. Do you want to be successful with us? Then, please send us your application: SCHOTT Glass (Malaysia) Sdn. Bhd., Human Resources, Wendy Wang *At SCHOTT, it’s your personality that counts – not your gender, your identity, or origin.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
8
SR MANUFACTURING ENGINEER
Butterworth, Pulau Pinang
TE Connectivity Corporation
Posted 12 days ago
Job Viewed
Job Description
Select how often (in days) to receive an alert: At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable, and more connected world. Job Overview
TE Connectivity's Manufacturing Engineering Teams are process leaders for stamping, molding, or assembly-related topics, ensuring processes operate at optimal levels for quality and output. They are experts in mold tooling, die tooling, machining, and assembly techniques, with extensive knowledge of related manufacturing processes. Their responsibilities include process optimization, standardization, and supporting manufacturing excellence initiatives such as Centers of Excellence (COE) and Best Demonstrated Practices (BDPs). They design and develop manufacturing processes and automation platforms for new product development and existing product optimization. Additionally, they support product development in tool selection and process optimization, ensuring manufacturability of new designs, smooth ramp-up, and R&D prototyping. What your background should look like:
Key Responsibilities Lead continuous improvement projects to enhance manufacturing performance Support development and implementation of efficient production processes and tools Collaborate with engineering, quality, and production teams on new product introductions Analyze and resolve production issues using root cause and corrective action methods Drive lean manufacturing practices including 5S and waste reduction Maintain and update process documentation and standard work procedures Ensure compliance with safety, quality, and company standards Mentor and support junior engineers and production staff Job Requirements Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related field Minimum five years of relevant experience in a manufacturing environment Strong knowledge of lean manufacturing and problem-solving tools Proficient in Microsoft Office and engineering documentation tools Excellent teamwork, communication, and analytical skills Experience in electronics or connectivity manufacturing is an advantage Competencies
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork Location:
Prai, Penang, MY, 13600 State:
07 Country/Region:
MY Travel:
None Requisition ID:
Alternative Locations:
Job Segment:
Manufacturing Engineer, R&D Engineer, Electronics Engineer, Mechanical Engineer, Machinist, Engineering, Manufacturing
#J-18808-Ljbffr
TE Connectivity's Manufacturing Engineering Teams are process leaders for stamping, molding, or assembly-related topics, ensuring processes operate at optimal levels for quality and output. They are experts in mold tooling, die tooling, machining, and assembly techniques, with extensive knowledge of related manufacturing processes. Their responsibilities include process optimization, standardization, and supporting manufacturing excellence initiatives such as Centers of Excellence (COE) and Best Demonstrated Practices (BDPs). They design and develop manufacturing processes and automation platforms for new product development and existing product optimization. Additionally, they support product development in tool selection and process optimization, ensuring manufacturability of new designs, smooth ramp-up, and R&D prototyping. What your background should look like:
Key Responsibilities Lead continuous improvement projects to enhance manufacturing performance Support development and implementation of efficient production processes and tools Collaborate with engineering, quality, and production teams on new product introductions Analyze and resolve production issues using root cause and corrective action methods Drive lean manufacturing practices including 5S and waste reduction Maintain and update process documentation and standard work procedures Ensure compliance with safety, quality, and company standards Mentor and support junior engineers and production staff Job Requirements Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related field Minimum five years of relevant experience in a manufacturing environment Strong knowledge of lean manufacturing and problem-solving tools Proficient in Microsoft Office and engineering documentation tools Excellent teamwork, communication, and analytical skills Experience in electronics or connectivity manufacturing is an advantage Competencies
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork Location:
Prai, Penang, MY, 13600 State:
07 Country/Region:
MY Travel:
None Requisition ID:
Alternative Locations:
Job Segment:
Manufacturing Engineer, R&D Engineer, Electronics Engineer, Mechanical Engineer, Machinist, Engineering, Manufacturing
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
9