344 Civil Engineering jobs in Malaysia

Job Opportunity – Drilling Superintendent / Senior Drilling Engineer / Drilling Engineer

We are sourcing qualified candidates for the following positions:

Location: Kuala Lumpur
Duration: Until 31 December 2025 (possible extension)

• Coordinate overall planning and operational strategies, obtaining necessary approvals from the company.
• Manage engineering team in preparing Well Design Basis, Drilling Program, Section Guidelines, Logistics Management Plan, and related documents.
• Oversee well-site supervision of drilling and well construction activities, ensuring adherence to well programs, safety, and environmental regulations, and managing service company contractors.

Support drilling operations by managing crew movements, supply chain, and obtaining government approvals for drilling programs/AFE.

Ensure proper coordination of drilling operations through daily offshore and onshore meetings, and contribute to well program development.

Assist in developing and monitoring Health, Safety, and Environment plans in collaboration with the HSE team, rig contractors, and service providers.

Senior Drilling Engineer

• Provide advanced expertise in drilling engineering, including preparing operating procedures, Well Design Basis using software like Landmark, and tender specifications.
• Advise on equipment and materials procurement, develop WP&B and AFE documents, and analyze data to improve future operations.
• Monitor daily drilling activities and manage Management of Change (MOC) processes as needed.
• Coordinate with logistics to ensure safe and efficient operations and act as Drilling Superintendent during leave.
• Minimum 10 years of experience in the oil industry and drilling activities in Malaysia.

Drilling Engineer

• Provide advanced expertise similar to the Senior Drilling Engineer, including preparing operating procedures, Well Design Basis, tender specifications, and data analysis.
• Develop End of Well Reports (EoWR) and monitor daily operations, acting as Sr. Drilling Engineer during leave.
• 5-10 years of experience in the oil industry around Malaysia.

Interested candidates should submit their updated CV to with the subject (Application for Position). Share this post with your network. Closing Date: ASAP. Only qualified candidates will be contacted.

#J-18808-Ljbffr

As an Internal Employee we value the contribution you make to SBM Offshore. See how a change in role doesn’t just develop you further but also us.

Energy is a fundamental basic need of our society. Fossil fuels, including oil, are an essential source of energy and will remain so until renewable energies have the capacity to meet the growing demand for energy.

Nearly 5,000 SBMers globally are proud to design, build and operate floating facilities that produce more than 1% of the world’s oil. We do it in the safest, most affordable and most sustainable way. And we continuously strive to reduce emissions, in line with our emission ZEROTM program.

As a leader in floating technologies for the oil and gas industry, we recognize the significant importance of climate change and the growing need for renewable energy. We invest in products and services that enable the transition towards renewable energy, with a focus on Floating Offshore Wind, Wave Energy, and Carbon Capture and Storage. In addition, we also develop Smart Digital Services to improve and support everything we do.

Oceans play a central role in producing the energy of today and of tomorrow. We work together with the world’s leading energy companies to make that happen. We act responsibly and ethically so that communities where we operate benefit from our presence and activities.

We are committed to sharing our experience to deliver safe, sustainable, and affordable energy from the oceans for generations to come.

We are Energy. Committed.

JOIN US!
This posting has for objective to give ourselves the chance to work together, in the short, medium, or long term. SBM Offshore's active leadership position on the market, combined with our People Development and Succession Planning activities, requires us to be ready to onboard and mobilize our future Structural Topside Engineer as soon as a new vacancy opens!

You are considering a new challenge in a few weeks, months, or even years? If you match the requirements below, APPLY NOW!

The E3D Application Structural Specialist is responsible for utilizing AVEVA E3D software to provide support to Structural Topsides Designers in terms of 3D modeling and drafting tools. This role involves collaborating with Structural Topsides design teams to ensure efficient and accurate structural 3D modeling and drafting output.

Key Responsibilities:

• Structural 3D Modeling: Maintain the functionality of existing 3D modeling macros modeling tools to ensure smooth and better modeling efficiency. Maintain the structural E3D catalogue. Update the catalogue whenever required by the structural design team.
• Drawing & Drafting: Maintain the functionality of existing drafting macro tools to ensure smooth and better drafting efficiency. Generate, review and update the Title block details to ensure compliance with project requirements.
• New E3D macros/tool development: Based on project requirements or to further improve the 3D modeling & drafting efficiency and quality, new macros shall be developed, tested and approved prior to implementation.
• Training and Development: Provide training in E3D software and best practices. Knowledge sharing of the latest/updated AVEVA E3D tool function with designers.
• Technical Support: Provide technical support and guidance to the design teams regarding structural design and E3D software usage.
• Work collaboratively: Work closely with structural team and other engineering disciplines such as Piping & Electrical to integrate structural designs with overall project requirements. Also participate in the coordination of tool development and standardization across Regional Centers.
• Structural MTO Extraction: Perform MTO extraction on a weekly basis during EPC.
• Clash Check: Perform clash check extraction on a bi-weekly basis during EPC. Output will be evaluated by the design team.

Qualifications:

• Education: Bachelor’s degree in Software Programming/Engineering or any engineering field. Knowledge in Civil or Structural Engineering or related engineering field is an added advantage.
• Working Experience: Minimum of 5 years of hands-on experience with AVEVA E3D software with experience in creating/modifying E3D macros. Experience in structural design is advantageous.
• Technical Skills: Proficiency in AVEVA E3D. Knowledge of structural design codes and standards is an added advantage.

Soft Skills: Strong communication skills, ability to work collaboratively in a team environment, and excellent problem-solving abilities. A passion for leveraging advanced 3D modeling tools to deliver high-quality designs.

• Industry Knowledge: Experience in the oil and gas offshore structure such as FPSO, semi-sub or jacket platform is advantageous.
• Others: Familiarity with 3D model review platforms such as Navisworks Simulate/Freedom.

SBM Offshore N.V. is a listed holding company that is headquartered in Amsterdam. It holds direct and indirect interests in other companies that collectively with SBM Offshore N.V. form the SBM Offshore Group (“the Company”). SBM Offshore provides floating production solutions to the offshore energy industry, over the full product lifecycle. The Company is market-leading in leased floating production systems delivered to date, with multiple units currently in operation, and has unrivaled operational experience in this field. The Company’s main activities are the design, supply, installation, operation, and life extension of floating production solutions for the offshore energy industry. For further information, please visit our website at . The companies in which SBM Offshore N.V., directly and indirectly, owns investments are separate entities.

SBM Offshore is proud to be an Equal Employment Opportunity and Affirmative Action employer. SBM Offshore does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

#J-18808-Ljbffr

Our Vision.

SBM Offshore believes the oceans will provide the world with safe, sustainable and affordable energy for generations to come. We share our experience to make it happen.

Our Profile.

We design, build, install and operate offshore floating facilities for the offshore energy industry. As a leading technology provider, we put our marine expertise at the service of a responsible energy transition by reducing emissions from fossil fuel production, while developing cleaner solutions for renewable energy sources. More than 7,000 SBMers worldwide are committed to sharing their experience to deliver safe, sustainable and affordable energy from the oceans for generations to come. Together, we are driving progress forward in a TRUE. BLUE. TRANSITION.

#OGJS

Location: KL

Employment: Permanent

JOIN US!
This posting has the objective to give ourselves the chance to work together, in the short, medium, or long term. SBM Offshore's active leadership position on the market, combined with our People Development and Succession Planning activities, requires us to be ready to onboard and mobilize our future Principal Structural Engineer as soon as a new vacancy opens!

You are considering a new challenge in a few weeks, months, or even years? If you match the requirements below, APPLY NOW!

Job description:

The Principal Structural Engineer utilizes technical expertise to develop and deliver safe and quality solutions with minimal guidance. The Principal Structural Engineer works well and effectively with project stakeholders, inter-discipline leads, and the engineering team to achieve project objectives and ensure quality in engineering delivery in a timely manner. You ensure successful resolution of complex technical issues directly and indirectly related to structural and structural interfaces.

You engage with peers and experts within the Kuala Lumpur execution centre and across international centers to collaborate, promote knowledge sharing, reach alignment, and develop or expand engineering methodologies, internal standards, guidelines, and best practices for continuous improvement.

Job requirements:

1. Minimum Bachelor Degree in Civil/ Structural/ Mechanical Engineering/Naval Architecture.
2. Expert in structural analysis, calculations, and code check.
3. Expert in finite element analysis, FEA result interpretation, and post-processing.
4. Demonstrate depth and breadth of technical knowledge to ensure technical solutions account for constructability, maintainability, as well as schedule and budgetary constraints.
5. Proactively provide Discipline Manager and Discipline Lead with updates regarding activity status, highlight concerns as they arise, and provide guidance to support Discipline Lead to stay within the allocated budget.
6. Challenge technical solutions to ensure all options have been considered and promote best approach.
7. Collaborate with Discipline Lead to propose or optimize methodology within the framework of project requirements.
8. Ensure activities are completed in compliance with applicable policies, client requirements, codes, standards, regulations, and industry practices.
9. Participate in Client meetings to influence decision making and resolve complex technical issues.

Working experiences:

1. Minimum 15 years working experience in structural engineering design and analysis calculation for strength, buckling, fatigue of steel structures.
2. Experience in FPSO hull structures concept development, framing, weight estimation, MTO, detailed design, and construction support.
3. Familiar with ABS Rules on Floating Production Installation.
4. Familiar with ABS Eagle ISE and TSA.
5. Familiar with BV MARS 2000 and VeriSTAR Hull is an added advantage.
6. Familiar with ABS and DNV guides on fatigue assessment and plate buckling calculations.
7. Familiar with AISC Specification 1989 Edition, AISC 360-16-ASD, API RP2A-WSD, and AWS D1.1M.
8. Familiar with Femap NASTRAN and DNV SESAM GeniE software or equivalent.
9. Experience in basic structural vibrations and troubleshooting.
10. Experience in structural nonlinear analysis (ship collision, blast analysis).
11. Experience in interface with Vessel Team (Marine and Naval).
12. Experience in interface with Topside and Mooring Team.
13. Experience in full ship length analysis (strength and spectral fatigue) is an added advantage.

GENERAL INFORMATION

SBM Offshore N.V. is a listed holding company that is headquartered in Amsterdam. It holds direct and indirect interests in other companies that collectively with SBM Offshore N.V. form the SBM Offshore Group (“the Company”). For further information, please visit our website at . The companies in which SBM Offshore N.V., directly and indirectly, owns investments are separate entities.

SBM Offshore is proud to be an Equal Employment Opportunity and Affirmative Action employer. SBM Offshore does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

#J-18808-Ljbffr

Job Opportunity – Drilling Superintendent / Senior Drilling Engineer / Drilling Engineer

We’re sourcing for qualified candidates to fill the following positions:

Work Based: Kuala Lumpur.
Estimated Duration: Until 31 December 2025 (with possible extension)

• Co-ordinates the overall efforts of planning, and operations strategies while obtaining all necessary approval or authority from the company.
• Manage engineering team members in preparation of Basis of Well Design, Drilling Program, Section Guideline, Logistics Management Plan and other relating documents.
• Manage the Operations Dept. team in the well-site supervision of all drilling and well construction activities:

(i) adherence to well programs and instructions.

(ii) adherence to safety and environment laws & regulation.

(iii) management of service company contractor.

• Manage the Operations Dept. team in drilling support operations:

(ii) crew movement.

(iii) supply chain management.

(iv) drilling programs/AFE approval from the government.

• Manage drilling operations proper coordination through:

(i) conducting coordination morning calls – offshore teams and onshore operation team in the office to report the progress.

(ii) providing input into well programs.

• Assists developing and monitoring the Health, Safety and Environment plan under liaise with Company’s HSE team, rig contractor and key service providers.
• More than 15 years’ experience in oil industry & drilling activities.

Senior Drilling Engineer

• Provide advanced drilling engineering expertise for the preparation of operating procedure for successful drilling operation.
• Provide advanced drilling engineering expertise for the preparation of BoWD (Basis of Well Design) for planned wells by drilling engineering software ex. Landmark.
• Provide advanced drilling engineering expertise for the creation of tender process specifications, the selection of drilling service providers and materials suppliers.
• Provide advanced drilling engineering expertise for specific recommendations for specific equipment and materials to be ordered to contractors.
• Provide advanced drilling engineering expertise for developing WP&B and AFE documents.
• Provide advanced drilling engineering expertise for carrying out data analyses to enhance learning effect in future operations.
• Provide advanced drilling engineering expertise for closely monitoring daily drilling operations and initiating the processes of MOC whenever necessary.
• Provide advanced drilling engineering expertise for interfacing with logistics staffs to stay abreast of daily activities and provide insight, advice and suggestions to them for day to day safe and efficient arrangement.
• Act Drilling Superintendent during his leave.
• More than 10 years’ experience in oil industry & drilling activities around Malaysia region.

Drilling Engineer

• Provide advanced drilling engineering expertise for the preparation of operating procedure for successful drilling operation.
• Provide advanced drilling engineering expertise for the preparation of BoWD (Basis of Well Design) for planned wells by drilling engineering software ex. Landmark.
• Provide advanced drilling engineering expertise for the creation of tender process specifications, the selection of drilling service providers and materials suppliers.
• Provide advanced drilling engineering expertise for specific recommendations for specific equipment and materials to be ordered to contractors.
• Provide advanced drilling engineering expertise for developing WP&B and AFE documents.
• Provide advanced drilling engineering expertise for carrying out data analyses to enhance learning effect in future operations and develop EoWR (End of Well Report) post drilling operations.
• Provide advanced drilling engineering expertise for generating operational instructions, closely monitoring daily drilling operations and initiating the processes of MOC whenever necessary.
• Provide advanced drilling engineering expertise for interfacing with logistics staffs to stay abreast of daily activities and provide insight, advice and suggestions to them for day to day safe and efficient arrangement.
• Act Sr. Drilling Engineer during his leave.
• 5 – 10 years’ experience in oil industry around Malaysia region.

Interested candidates may submit your Updated CV to with the subject of (Application for Position). Feel free to share this post with your network.

Closing Date: ASAP.

Only qualified candidates will be contacted.

#J-18808-Ljbffr

New Job Opportunity – Senior Engineer, QA /QC (Civil)

Good day!

We are sourcing for qualified candidates to fill the post below.

REQUIREMENTS:

1. Bachelor’s degree, or equivalent, in civil / structural engineering or equivalent professional qualification in related field.
2. Professional certificate by accredited Bodies/ Associations is an advantage but not necessary.
3. Minimum of 20 years’ experience in site preparation activities for onshore Oil & Gas facilities.
4. Must have worked previously with Oil and Gas Operating Company or contractors involved in civil construction.
5. In-depth knowledge of earthwork, piling, foundation, drainage, pavement, concreting, roadwork, and structural work.
6. Thorough knowledge of compaction testing, cube test, and all related testing pertaining to civil and structural work.
7. Must possess strong experience in managing civil QA/QC activities for onshore gas / refinery / petrochemical units.
8. Must be well versed in painting, coating, fireproofing, insulation, and other related activities for structures, buildings, and shelters.
9. Must be well acquainted with construction of access roads, piling, buildings, drainage system for onshore gas facility.
10. Must be well conversant with international codes and standards such as ASTM D1557, ASTM D6913, ASTM C150, ASTM C192, etc.
11. Should be acquainted with local Malaysian regulations related to QA/QC/Inspection of Oil & Gas facility.
12. Good communication, coordination, and organizing skills with the ability to work with minimal supervision and liaise effectively and efficiently with other team members and outside stakeholders.
13. Demonstrate a high level of interpersonal skills and integrity.

Interested candidates may submit your Updated CV to with the subject of (Application for Position). Apply today or share this post with your network.

Closing Date: 19 June 2024.
Only qualified candidates will be contacted.

#J-18808-Ljbffr

Head of Project Sales (Building Materials)

Join to apply for the Head of Project Sales (Building Materials) role at Michael Page.

About Our Client

Our client is a large organization within the building material sector, recognized for its high-quality products and innovation. They are committed to excellence and provide a supportive environment for professional growth.

Job Description

• Lead and drive growth within the commercial and industrial segments by overseeing the full product portfolio and guiding the project sales team.
• Develop and implement strategic sales plans aimed at securing product specifications and winning high-value, large-scale projects.
• Manage and mentor a team of sales professionals, fostering alignment with business goals and supporting individual career development.
• Cultivate strong relationships with key stakeholders including consultants, contractors, developers, architects, and other decision-makers.
• Collaborate cross-functionally with marketing, technical, and operations teams to deliver comprehensive, client-focused solutions.
• Track market dynamics including trends, project pipelines, and competitor activities to proactively identify opportunities and mitigate risks.
• Oversee tender submissions, proposals, and contract negotiations for strategic projects, ensuring competitive positioning and compliance.
• Provide regular reporting on sales performance, forecasts, and market intelligence to senior leadership.

The Successful Applicant

We are looking for an experienced senior project sales candidate who has a proven track record in project sales for the building materials industry, with strong leadership ability. The ideal candidate should have:

• Bachelor's degree in Business, Marketing, Engineering, Construction Management, or a related field.
• At least 10 years of proven success in project sales within the building materials, construction, or related industries.
• Demonstrated leadership capabilities, with experience managing and developing a team of three or more sales professionals.
• A well-established network of industry contacts including consultants, architects, and developers is a strong advantage.
• Exceptional communication, negotiation, and stakeholder engagement skills.
• Strategic and commercially minded, with a track record of closing large-scale project deals.
• Highly self-motivated, results-driven, and adaptable to a fast-paced, project-oriented environment.

What’s on Offer

• A competitive annual salary package with great benefits.
• Performance-based bonus to reward achievements.
• Comprehensive medical coverage for you and your family.
• Opportunities for career progression within a large organization.
• A professional and supportive work environment in Petaling Jaya.

If you are ready to take on a leadership role within the building materials industry, apply now to be considered for this exciting opportunity.

Contact: Ben Wong

Quote job ref: JN-

#J-18808-Ljbffr

Overview

Arup Kuala Lumpur is seeking a Senior Civil Engineer to join our design consultancy team in Penang. You will contribute your expertise to a diverse range of civil engineering projects, working with talented professionals to shape the future of civil engineering. The role emphasizes sustainable design, strong technical skills, and innovation.

Responsibilities

• Undertake strategic planning projects, including feasibility analysis, impact assessments, modelling and developing high-value strategies for clients across public and private sectors.
• Lead input on projects, ensuring work quality is maintained to the expected standard with technical input on a broad range of projects in civil engineering, master planning, transport, and related areas.
• Contribute to the technical leadership and coordination of small and medium sized projects, and be a key member of larger project groups.
• Provide support and mentoring for staff and allocation of tasks.

Qualifications

• Recognised Degree in Civil Engineering or equivalent
• At least 10 years of relevant experience in civil and structural works
• Obtain Malaysian PE or Chartered Engineer status (an added advantage)
• Substantial knowledge and consulting and technical experience in civil and structural engineering and related areas
• Experience in managing key projects, including supervision of multi-disciplinary project teams where appropriate

What We Offer

At Arup, we care about each member’s success and offer a competitive total reward package, including health and wellbeing support, learning opportunities and opportunities to have an impact through the work you do. We are owned in trust on behalf of our members, allowing us to set our own direction and pursue work aligned with our purpose. Profit Share is a key part of our reward for eligible members.

• Flexible working hours
• Paid maternity leave for 98 days
• Paid paternity leave for 7 working days
• Birthday leave
• Mobile phone allowance
• Travel allowance
• Purchase Additional leave of up to 20 days (permanent employees)
• International mobility opportunities
• Paid annual subscription to relevant Professional associations
• Reimbursement of Professional Engineers application and examination fees
• Exam Leave (6 days)
• QP allowance
• Master’s Degree Sponsorship Scheme
• Car allowance for Associates and above

Our Application Process

Please apply directly through our applicant tracking system. Shortlisted candidates will be contacted by Talent Acquisition to discuss next steps. Arup will never ask for your bank details as part of recruitment. We do not accept unsolicited resumes from recruiters or employment agencies.

Seniority level

• Mid-Senior level

Employment type

• Full-time

Job function

• Design, Consulting, and Engineering

Industries

• Civil Engineering, Architecture and Planning, and Construction

#J-18808-Ljbffr

Select how often (in days) to receive an alert:

To complement our team, we are looking for a customer- and team-oriented individual for our division Plasma Control Technologies at the Penang site as a

For over 75 years, we have been following our curiosity. It drives us and has made Comet a leading Swiss technology company worldwide. Curiosity and the spirit of research have allowed us to become and remain innovative. For a better and sustainable world.

We develop and produce innovative high-tech components and systems based on X-ray and radio-frequency technology. Our developments make an important contribution to safer, more efficient and more sustainable production, mobility and communication.

In the Plasma Control Technologies (PCT) division, we manufacture specialized components that are required for the precise control of plasma processes and are used in the production of memory chips or touch screens for sensors, smartphones or tablets.

What You Will Do

• Lead the operation and optimization of critical facility systems including HVAC, electrical distribution, process utilities (CDA, WWT, nitrogen), and building infrastructure to ensure manufacturing uptime and compliance.
• Develop and implement robust maintenance strategies using BMS/CMMS systems and IoT data to drive predictive and preventive maintenance programs.
• Manage asset integrity, vendor contracts, and SLAs while ensuring adherence to safety, regulatory, and Comet standards.
• Drive energy efficiency and cost-saving initiatives through system validation, performance monitoring, and continuous improvement projects.
• Mentor and manage a maintenance team, providing technical guidance and fostering a culture of reliability and operational excellence.

What You Bring

• Bachelor’s degree in Electrical, Mechanical, or related engineering field.
• 5+ years of experience in facilities/maintenance engineering within a manufacturing environment; greenfield startup experience is a plus.
• Deep technical expertise in critical utilities (HVAC, electrical systems, CDA, WWT) and proficiency in BMS/SCADA/CMMS platforms.
• Proven leadership skills with experience managing teams, contractors, and cross-functional projects.
• Strong regulatory knowledge and experience ensuring compliance with local safety and facility standards.

Lead with Impact

• Shape a world-class facility in a dynamic greenfield manufacturing environment.
• Drive innovation in maintenance strategy and energy efficiency initiatives.
• Mentor and grow your team while expanding your technical and leadership capabilities.
• Advance your career with opportunities in facilities management, operational leadership, or global engineering roles.

Why join us? Break new ground with us:

• Work on innovative solutions for global technical challenges
• Benefit from flexible working options and hybrid working
• Take part in Comet’s success through profit sharing
• Work with international colleagues and grow as a team
• Enjoy our diverse educational and career opportunities
• Access a wide range of benefits including allowances for meals, transport, tolls, mobile, and car loan interest
• Benefit from Flexi Benefits for health checks, dental and optical care, plus comprehensive medical insurance coverage

We are curious about you and look forward to receiving your complete online application and will be happy to answer any questions you may have.

For this vacancy, we only consider direct applications. Submissions from recruitment agencies will not be considered.

#J-18808-Ljbffr

Workday Career Site Cookie Notice* **Optional** : + and . + We use third-party services such as Google Analytics to gather external career site traffic metrics and analyze visitor information, such as browser usage, visitor numbers, and which pages are used. sets out how they use the information they gather. + We may use **pixel tags or scripts** supplied by various job boards to track when you navigate to our website from a job board and submit a job application. Flex uses this information on an anonymous basis, this helps us understand the efficiency of our recruiting campaigns. Further information on these pixel tags or scripts may be provided by the job board site you have used.# Select to consent to this use or DeclineSenior Facilities Engineer page is loaded# Senior Facilities Engineerlocations: Malaysia, Penangtime type: Full timeposted on: Posted Todayjob requisition id: WD Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.# Job SummaryJob DescriptionTo support our extraordinary teams who build great products and contribute to our growth, we’re looking to add a ***Facilities Engineer***located in ***Bukit Minyak, Penang.***What a typical day looks like**:* Handle facility equipment plan, budget, job follow up and evaluation job done. Compressor/chiller/air condition* Leader for Solid Waste Operation team with a group of operators, job involve waste material movement control, operation, data collection, weight system accuracy, costing report.* Handle government agencies audit/inspection relate to facility equipment/fire fighting system* Work together and feedback to other facility team members and to get job done smoothly.* Follow up monthly utility cost report, good in EXCEL and Power point* Join and support inter-department meeting or job activities resolve any issue involve facility job.* Analyzes facility products or equipment specifications and performance requirements to determine designs which can be produced by existing manufacturing or processing facilities and methods.* Analyzes engineering proposals, process requirements and related technical data pertaining to industrial facilities machinery and equipment design.* Determines feasibility of designing new plant facilities equipment or modifying existing facilities considering costs, available space, time limitations, company planning and other technical and economic factors.* Provides technical facilities information concerning manufacturing or processing techniques, materials, properties and process advantages and limitations which affect long range plant and product engineering planning.* Compiles and analyzes facilities research data to establish performance standards for newly designed or modified equipment.* Studies engineering and technical publications to keep abreast of technical changes and developments in industry.* Uses computer assisted engineering and design software and equipment to perform engineering tasks.* Leads projects and project teams.**The experience we’re looking to add to our team:*** Possesses a Degree in related discipline or equivalent experience.* Minimum 8 years of working experience in the related field is required**What you’ll receive for the great work you provide:*** Medical benefits, dental, vision* Life Insurance* Paid Time Off* Performance BonusSR89# # Job CategoryOperationsRequired Skills:Optional Skills:Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).
#J-18808-Ljbffr