605 Manufacturing jobs in Malaysia

The Manufacturing Supervisor is responsible for the day-to-day supervision of all manufacturing personnel within their department. This position ensures build plans are achieved with the highest level of customer satisfaction and quality, while also ensuring compliance to all regulatory and quality regulations.

Duties & Responsibilities:

1. Comply with the procedures defined in the Quality System, Company Policies and Malaysian Labor Law.
2. Supervise hiring, training and performance of associates and leads.
3. Work together with Quality and Process engineering department to clearly document steps and acceptance criteria of the product assembly in the appropriate manufacturing documentation (MAP and AP’s) and Visual aids.
4. Ensure and monitor that the manufacturing lines have available appropriate manufacturing documentation to assembly products such as visual Aids, Physical Visual aids and manufacturing documentation.
5. Ensure manufacturing lines have printed and posted in each process workbench visual aids and physical visual aids as required for easily access of the document in a manner that the associate and leads can have product acceptance criteria as reference.
6. Ensure adherence to procedures and to good manufacturing practices.
7. Meet production schedule within Efficiency and yield goals. Achieve company’s metrics.
8. Ensure Line Balancing document is available in production line and work with leads, process engineer and industrial engineer to assign workloads to each assigned work station with personnel available in order to improve efficiency, reduce/eliminate bottlenecks, minimize associates downtimes and eliminate waiting waste.
9. Perform Disciplinary sanctions according to internal regulations.
10. Supervise proper material identification and segregation (Raw material and Finished Product).
11. Elaboration of reports requested by Management.
12. Support the company activities and projects.
13. Report unsafe conditions or actions.
14. Ensure a clean and orderly workplace.
15. Make sure that all the personnel wear their personal safety equipment.
16. Comply with personnel rotation and ergonomic requirements.
17. Perform investigations to identify non-conformant product rejection causes and actions to prevent the recurrence.

Minimum & Preferred Qualifications and Experience:

Minimum Qualifications:

• Supervising experience (2 years).
• Ability to communicate written and oral and establish professional and effective interaction with co-workers, subordinates, Engineering and Quality Assurance.

Preferred Qualifications:

• Knowledge/experience on ISO 13485 requirements and the Quality System Regulation.
• Knowledge and experience in CGMP requirements and preferably FDA and ISO medical device requirements.
• Experience with electrical/optical products.

Education:
B achelor’s degree in Industrial Engineering or equivalent in experience.

Physical requirements/Work Environment:

This position primarily works in an office and manufacturing/production environment. It requires frequent sitting, standing and walking. Daily use of a computer and other computing and digital devices is required. May stand for extended periods when facilitating meetings or walking in the facilities. Some local travel is necessary, so the ability to operate a motor vehicle and maintain a valid Driver’s license is required.

The physical demands of the position described herein are essential functions of the job and employees must be able to successfully perform these tasks for extended periods. Reasonable accommodations may be made for those individuals with real or perceived disabilities to perform the essential functions of the job described.

A Manufacturing Operator is responsible for assembling and inspection electronic components and products. They follow details instructions or schematic to ensure quality and accuracy in production. Operators use various tools and equipment in production lone environment while maintaining safety and efficiency. They also assist supervisors for continuous improvement activities.

Your tasks

• Perform manual PCB assembly and hand soldering with special knowledge (at least IPC Class II)
• Assemble THT components for wave soldering
• Inspection of PCBAs with optical inspection systems based on predefined criteria
• Documentation of the inspection results
• Reworking of PCBAs and components
  
  

• Minimum SPM level or certificate in any field
• 3 years’ experience in related field
• Experience in PCB Assembly and hand soldering
• IPC Certification Class II or higher (Certified IPC7711/7721) would be an advantages
• Able to read and understand work instructions
• High quality awareness
• Good communication skills
• Able to perform shift work where required
  
  

A manufacturing engineer designs, develops, and optimizes manufacturing processes and systems to produce goods efficiently and effectively

• Intermediate skill in Microsoft Excel and Word (Excel formulas).
• Have some interest to learn about engineering tasks and projects.
• Have some interest in industrial 0 and IOT(internet of things.
• Create a creative way to display/present data if needed.
• Able to support when required.

• A minimum degree in Electrical & Electronics is an added advantage.
• Fresh graduates or those with working experience in the Manufacturing Industry are encouraged to apply.
• Knowledge of MS Office and AutoCAD is compulsory.
• Responsible for preparing FAI.
• Supervise daily engineering department activities.
• Solve NPI / Production issue.
• Candidates who are fluent in Mandarin are preferred because the role requires candidates to interact with Mandarin speakers.

No matter the location, or the role, every BizLink employee shares one mission: Make interconnection easier to improve the quality of life and turn customers' innovative ideas into reality.

You can always contact us on

Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world. We believe in the power of diversity and inclusion and cultivate a workplace culture of belonging that views uniqueness as a competitive edge and builds a community that enables our people to push the limits of innovation to make great products that create value and improve people's lives. A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.

Job Description

To support our extraordinary teams who build great products and contribute to our growth, we’re looking to add a Manufacturing Engineer located in Flex PTP.

Reporting to the Test Engineering Manager the Manufacturing Engineer role is responsible to plans, directs, and coordinates manufacturing processes by providing technical support maintenance of manufacturing methods by performing the following duties in the manufacturing phase of the product lifecycle.

What a typical day looks like:

• Understand manufacturing and test equipment concepts, technologies and techniques
• Designs manufacturing processes within schedule and budgetary parameters.
• Develops, evaluates, and improves manufacturing methods.
• Define equipment maintenance requirements, identify root-causes of equipment failures and develop hands-on maintenance skills
• Work with other engineering stakeholders and customers on problem solving and continuous improvement to the design of equipment and products and may develop corrective and preventive action plans
• May be involved in development and and update of PFMEA for new products
• May participate in control plan development
• Write and update work instructions and other documents (e.g. specifications, procedures,…)
• Analyzes and designs layout of equipment and workspace for maximum efficiency.
• Confers with production group concerning product design and tooling to ensure efficient production methods.
• Coordinates with customers to determine product specifications and design changes and responds to customer request.
• Provides information for management decisions from a technical and technical cost perspective.
• Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes.
  
  

• Minimum of a Bachelor's Degree in electrical engineering, mechanical engineering or similar field.
• Experience with project management.
  
  

• Full range of medical benefits, dental, vision
• Life Insurance
• PTO
  
  

• Site
  
  

Purpose Statement
Under supervisory direction, works closely with R&D and Manufacturing in the development of robust, capable, cost effective & safe manufacturing processes. equipment, materials and products and supports efficient and effective transfer of new products & processes into commercial production.

About Us
As a global medical technology leader for more than 40 years, our mission at Boston Scientific (NYSE: BSX) is to transform lives through innovative medical solutions that improve the health of patients. If you’re looking to truly make a difference to people both around the world and around the corner, there’s no better place to make it happen.

Key Responsibilities
• Demonstrates basic technical expertise on process/product technologies to support design, optimization, validation and troubleshooting of those technologies.
• Under supervisory direction, provides input to Equipment engineering or external equipment/tooling or material vendors in the selection, design & development of new (or upgrades to existing) equipment, tooling and materials.
• Demonstrates good working knowledge of DFSS/DMAIC tools and, with mentor assistance, applies these tools in the characterization, optimization and troubleshooting of process equipment and technology performance.
• Supports the development and execution of experimentation and testing to enable characterisation, optimization and troubleshooting of processes and equipment. and summarizes, analyses and draws conclusions from test results leading to effective technical resolution.
• Supports the introduction of new processes, equipment and materials including installation, calibration, EHS assessment debug, and all associated process and quality system documentation requirements including technical and process work instructions.
• With mentor assistance demonstrates good working knowledge and application of Lean methodologies, and process improvement tools to assist in identification and elimination of "waste" process steps and development of efficient, cost effective equipment and processes.
• With mentor assistance demonstrates good working knowledge and application of Process and equipment validation techniques, PFMEA’s, and associated regulatory requirements and applies this knowledge in the support of efficient & timely validation of equipment and processes.
• Under supervision supports the writing and release of process validation documentation including FMEA's, Validation Plans, protocols and reports.
• Under supervision, supports execution and documentation of validation builds, co-ordinates testing of validation units and compiles, analyses and reports on the validation results.
• With mentor assistance ensures compliance with all the regulations governing the quality systems.
• For individual who is assigned calibration engineering role only:
• Provide equipment calibration services necessary to meet company objectives, while assuring measurement traceability to nationally recognized equipment calibration standards and practices.
• Supporting Technical SME for Calibration group and for internal and external Audit
• Competent on Calibration Management System
• Perform calibration functions and sets day to day function for calibration group
• Supports the research and acquisition of new standards and other capital equipment, providing detailed justifications and cost analysis as required.
• Develops technical engineering reports and calibration procedures and trains department technicians on new calibration procedures.
• Provides support and guidance to calibration technicians in performing moderately complex equipment calibrations.
• Supports calibration lab needs regarding such issues as environmental control and new technologies.
• Supports Senior Metrology Engineer and Management to develop the department fiscal year budgets.
• Communicates with the Operations ME function on calibration status.
• Build Quality into all aspects of work by maintaining compliance to all quality requirements
• Drive “Standard Work” in all aspect of Calibration activity.

Requisition ID: 604222

Responsibilities:

Product Quotation Request (PQR)

• Assessing project feasibility through product drawing and B.O.M review. (including built cycle time, avaibility of tools & equipment, non-recurring engineering (NRE) cost etc.)
• Set up the bill of materials (B.O.M) for the request for quotation (RFQ) stage in the Agile system.

Receive Customer Request Form (CRF)

• Establishing System Bill of Materials (B.O.M)
• Maintaining routing in SAP system
• Reviewing and preparing digital harness board drawing
• Reviewing and submitting Technical Queries (TQ)
• Managing project needs with customers, suppliers, and vendors.

FAI Sample Preparation

• Handle all technical queries (TQ) related to sample build.
• Ensure readiness of OI/CP/FMEA/General standards in the Agile system.
• Generate Control Plans (CP) and conduct Failure Mode Effect Analysis (FMEA)
• Prepare and review First Article Inspection Reports (FAIR) for customer approval
• Implement engineering changes (ECR/ECN) after sample preparation.

Others

• Provide regular reports on engineering-related key performance indicators (KPIs) and other KPIs assigned by Management on a weekly and monthly basis to both the departmental Head of Department (HOD) and the corporate office.
• Fulfill any additional responsibilities as directed by the HOD or direct superior as needed.
• Take the initiative to launch improvement projects or activities that aim to expedite engineering tasks.

Requirements:

• Applicants must possess at least a degree in Electrical & Electronic/Mechanical field of qualification.
• Fresh graduates or individuals with working experience in the Manufacturing Industry are strongly encouraged to apply.
• Proficiency in Google, MS Office, and AutoCAD is mandatory.
• Applicants with programming skills, particularly in JavaScript, HTML, and Python, are highly encouraged to apply.
• Candidates should demonstrate responsibility, dedication, and the ability to work under tight schedules with minimal supervision.
• Candidates who are fluent in Mandarin are preferred because the role requires candidates to interact with Mandarin-speaker

Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today!

UCT is looking for a talented Manager, Manufacturing to join us in Malaysia! The Manager, Manufacturing provides leadership to the manufacturing department including KPIs setting with goals driven, strategic planning and accountable for lines disciplines, efficiency & productivity, safety, quality, scrap reduction & avoidance and resource & cost optimization. They also identify and implement simple solutions to complex problems with hands-on and lead by example management style in fostering a culture of teamwork, shared values & mission and a dedication to excellence.

Essential Duties and Responsibilities:

• In-charge and manage the manufacturing operations of UCTM.
• Work with various functional teams to ensure production runs smoothly.
• Plan and direct schedules to ensure production and shipment are on time.
• Analyze manpower utilization, planning, production cycle count and process improvement.
• Ensure smooth transition of new product introduction to manufacturing.
• Manage all day-to-day manufacturing related activities. Set priorities, capacity planning, level loading strategies, and headcount assessments.
• Review and oversee manufacturing line design for optimal efficiency.
• Lead and a key driver for CIP.
• Work closely with all support organizations (Materials, WH, Engineering, Quality, etc.) to resolve customer issues, mitigate delivery and schedule problems.
• Support other adhoc duties and improvement projects assigned by by superior, HOD & management.

Knowledge, Skills & Abilities:

• Excellent management and interpersonal skills.
• Good team player and able to perform in fast paced environment.
• Strong understanding of factory utilization and production efficiency.
• Ability to work effectively with operations and other groups to ensure that site delivery and quality issues are met.

Educational/Certification Requirement :

• Bachelor’s Degree in Engineering.

Experience Requirement:

• Minimum 6 – 8 years relevant experience in manufacturing operations.

At Ultra Clean Technology, we do not just welcome diversity - we celebrate it! Ultra Clean Technology is proud to be an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations.

Brooks is a leading provider of automation solutions with over 40 years of experience in the semiconductor industry, offering precision robotics, integrated automation systems, and contamination control solutions that empower chip manufacturers worldwide. Our product portfolio includes a range of automation solutions, including robots, vacuum systems, and atmospheric robots for semiconductor manufacturing ( you looking for a place where you can be part of a transformation? Join us at Brooks Automation and be a part of a dynamic organization that is shaping the future of technology.

Manufacturing Engineer

Job Description
About the Role:

Brooks Automation is a global leader in automation solutions, serving advanced technology markets such as semiconductor manufacturing. Our new greenfield manufacturing site in Johor Bahru represents our commitment to innovation, excellence, and local talent development.

We are seeking an experienced, skilled and innovative Manufacturing Engineer to join our dynamic team at our Johor Bahru facility. In this pivotal role, you will design, optimize, and validate manufacturing processes and procedures to ensure operational efficiency, product quality, and scalable production. Collaborate closely with cross-functional teams, including design and transfer engineering, you will drive the seamless transition of products from R&D or transfer sites into full-scale production. Your expertise will be instrumental in enhancing assembly, testing, and automation workflows while proactively advising on design-for-manufacturability (DFM) principles to improve product viability.

The ideal candidate will possess a strong technical foundation in advanced manufacturing practices, including robotics and precision technologies, paired with exceptional problem-solving and communication skills. A demonstrated ability to balance hands-on engineering with strategic process improvements will be critical to success in this role.

Work Location: Onsite - Johor Bahru

Key Responsibilities:

• Manufacturing Line Readiness & Scalability: Lead end-to-end production line setup, including procurement, installation, and validation of fixtures, tooling, and equipment under copy-exact principles to ensure global replication. Maintain "golden unit" standards with rigorous documentation (BOMs, Work Instructions) and comply with change control. Conduct manufacturing readiness reviews, optimize capacity models, and collaborate with Supplier Development, Quality, and cross-functional teams (IT, Facilities, Supply Chain, Warehouse) to align infrastructure (cleanrooms, material flow, MRP setup) for rapid scale-up.
• Process Optimization & Lean Manufacturing: Drive efficiency, yield, and quality through Lean methodologies (5S, SMED, Value Stream Mapping), error-proofing (poka-yoke), and precision tooling design. Reduce cycle times, resolve defects via structured problem-solving (8D, DMAIC), and implement PFMEA to mitigate risks. Optimize labor allocation, reduce Cost of Quality (CoQ), and execute cost-saving initiatives through waste reduction.
• Quality Assurance & Compliance: Validate processes using Gauge R&R, enforce Process Quality Plans (PQP) for CTQ characteristics, and conduct root cause analysis (RCA) with closed-loop CAPA. Ensure compliance with SEMI/safety standards, statistical process control (SPC), and in-line metrology inspections. Supports and drive towards successful internal/external audits (e.g. cross-sites, customer, ISO audits).
• Automation & Advanced Manufacturing: Integrate robotics, PLC systems, and automated solutions into assembly, testing, and material handling. Validate reliability (GR&R) and compliance while optimizing throughput.
• Cross-Functional Collaboration: Partner with R&D on design-for-manufacturability (DFM) and tolerance analysis, support NPI activities (pilot validation, workstation readiness), and troubleshoot critical production issues (equipment failures, test bottlenecks). Develop training programs for copy-exact compliance, covering assembly practices, and defect recognition.
• Cost & Operational Excellence: Analyze manufacturing costs, establish labor & machine time standards, and recommend tooling/process upgrades. Lead small-to-large projects, ensuring on-time delivery within budget, while maintaining Test & Measurement Equipment (TME) calibration standards and managing preventive maintenance programs to minimize downtime.
• Additional Responsibilities: Support ad-hoc business needs and lifecycle optimization across product phases. Undertake other duties as assigned, to support evolving business needs.
  
  

• Bachelor’s degree in Mechatronics, Mechanical Engineering, Electrical Engineering, or a related technical field; Master’s degree preferred.
• 5+ years of manufacturing engineering experience in Robotics, Automated Machinery, or Industrial Equipment (OEM / EMS environments).
• Understanding operational and technical aspects of semiconductor manufacturing equipment (e.g. wafer handling systems, robotics, FOUP contamination control) is advantageous.
• Proficiency in statistical analysis tools (e.g. Minitab, JMP) and methodologies (SPC, DOE) for process optimization, yield enhancement, and quality control in equipment / machinery manufacturing environment.
• CAD skills (e.g. AutoCAD, SolidWorks) for equipment component design, manufacturing layout, and material flow optimization.
• Knowledge of ISO, SEMI, and safety/regulatory standards for equipment manufacturing compliance.
• Experience with Lean methodologies (5S, SMED) and continuous improvement frameworks (DMAIC, 8D).
• Familiarity with automated systems (PLC, robotic arms) and validation protocols (GR&R).
• Strong problem-solving and analytical abilities to troubleshoot equipment and process inefficiencies.
• Excellent communication and project management skills for cross-functional collaboration in fast-paced environments.
• Agile mindset with the ability to prioritize tasks and manage competing deadlines.
• Preferable qualifications: Six Sigma certification (Green Belt/Black Belt); Hands-on experience with Industry 4.0 technologies (IoT, predictive maintenance).
  
  

• Production Oversight: Manage day-to-day manufacturing operations to meet production targets and quality standards.
• Process Optimization: Develop and implement strategies to enhance productivity, reduce waste, and improve efficiency.
• Team Leadership: Supervise and mentor production teams, ensuring effective communication and collaboration.
• Local Workforce Engagement: Leverage deep understanding of Malaysian work culture to enhance team performance and motivation.
• Quality Control: Ensure compliance with industry standards and company quality assurance protocols.
• Safety & Compliance: Maintain a safe working environment by enforcing health and safety regulations.
• Resource Management: Allocate resources effectively, including manpower, materials, and equipment.
• Performance Monitoring: Track key performance indicators (KPIs) and implement corrective actions when necessary.
• Manufacturing Environment : Experienced in managing mixture of both highly manual manufacturing processes and highly automated processes.
• Cross-Department Collaboration: Work closely with supply chain, engineering, procurement, quality, facility, and IT teams to streamline operations, enhance efficiency, and ensure seamless integration of manufacturing processes.
• Employee Development: Conduct training programs to upskill the workforce and improve operational performance.
• Crisis Management: Develop contingency plans for unexpected disruptions in production or supply chain.
• Strategic Planning: Develop long-term manufacturing strategies to support business growth and market demands.
• Cost Management: Identify cost-saving opportunities while maintaining high-quality production standards.
  
  

• Bachelor's degree in Manufacturing, Engineering, or a related field.
• Proven experience in high-volume manufacturing management.
• Strong leadership and problem-solving skills.
• Extensive experience working with local Malaysian teams, fostering collaboration and efficiency.
• Knowledge of lean manufacturing and Six Sigma methodologies.
• Excellent communication and organizational abilities.