110 Intel jobs in Bayan Lepas

Get AI-powered advice on this job and more exclusive features.

• Responsible for hardware AE technical support in debugging and resolving on cellular and non-cellular wireless communication module products for customers.
• Provide reliable HW design solutions to customers according to their actual applications.
• Coordinate between different teams (like CPM, FAE etc.) in resolving customer’s HW related issues in a timely manner.
• Review the SCH and PCB design files of customer's device using EDA tools.
• Support to solve the problems encountered in customer’s devices by utilizing analyzing, troubleshooting and debugging skills.
• Assist customers in hardware related queries and concerns with prompt replies.

Qualification requirements:

• Bachelor’s degree in Electrical/Electronics/Communication/Microwave or equivalent with related knowledge of Principle of Communication & Technology.
• Familiar with IC system devices and features of some common communication interfaces such as power management, audio codec, USB2.0/3.0, UART, PCM, SDIO, PCIE.
• Able to use EDA tools and pick up the key information of a datasheet.
• Good at pressure handling, strain capacity, logical thinking and problem-solving abilities.
• Able to (Speak/Write/Listen) in Mandarin are added advantage as the position need to liaise with counterpart.
• Minimum 3 years of working experiences in related field.

Seniority level

• Seniority level Mid-Senior level

Employment type

• Employment type Full-time

Job function

• Industries Telecommunications

Referrals increase your chances of interviewing at Quectel by 2x

Get notified about new Application Engineer jobs in Bayan Lepas, Penang, Malaysia .

Service & Application Engineer / Mechanical & Electrical Engineer Principal / Technologist, Automation & Analytics Development Engineering (Fresh Grad ONLY - Intake July 2025 onwards) Engineer, Business Process Management Application Sales Engineer (Factory Automation) - Based in Penang

George Town, Penang, Malaysia 1 month ago

Field Application Engineer (SEG, Penang) Project Engineer (Project Management and Development) Senior Engineer, Software Development Engineering

Kulim, Kedah, Malaysia MYR3,500.00-MYR4,500.00 1 month ago

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Join to apply for the

Hardware Design Engineer

role at

Celestica Continue with Google Continue with Google Join to apply for the

Hardware Design Engineer

role at

Celestica Get AI-powered advice on this job and more exclusive features. Continue with Google Continue with Google Continue with Google Continue with Google Continue with Google Continue with Google Summary

The Senior Lead Engineer, Electrical Design develops new electrical systems/circuits for various applications. Research system ideas and draw up plans for these systems, and capture them in schematics and system specifications. Test, simulate, validate and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing of the electrical systems they have designed. Req ID: 126145

Remote Position: No

Region: Asia

Country: Malaysia

State/Province: Bayan Lepas

City: Penang

Summary

The Senior Lead Engineer, Electrical Design develops new electrical systems/circuits for various applications. Research system ideas and draw up plans for these systems, and capture them in schematics and system specifications. Test, simulate, validate and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing of the electrical systems they have designed.

The Senior Lead Engineer, Electrical Design works in cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations.

Detailed Description

Detailed Description

The successful candidate will be a self-starter who likes to take responsibility and works best with little supervision. Likes to perform a variety of tasks and have the ability to handle multiple priorities and has previously performed in a similar position. This is a 'hands-on' role requiring a strong technical background and product development experience.

Duties

Identify technical issues, troubleshoot and resolve them by coordinating with R&D, Manufacturing and Field teams Participate in customer technical meetings and prepare training programs for internal subordinates. Hardware validation of Networking, Storage, Server products against customer’s infield issues, requirements and Mfg. issues during NPI or RMA System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval. Qualify alternative components for compatibility, cost effectiveness and benchmarking Support Manufacturing Engineering and Test Engineers on trouble shooting and resolving technical issues and root cause analysis Work with software teams to identify root cause of system failure Ability to install software such as Linux based Operating Systems, ONIE, BIOS, BMC, SES Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum

Knowledge/Skills/Competencies

Candidates should have 8+ years' experience in either Network, Storage or Server products.

Strong electrical design and debug skills required Familiar with PCIe, NVMe, SAS, SATA, I2C, SPI, DDR buses SDRAM timing and integrity analysis for clocks, strobes, S&H, Power bounce, temp stability Hands-on design knowledge of latest peripheral chipsets for Gigabit Ethernet, SCSI, SATA, SAS, USB, Ethernet, & PCI cards etc. High performance RISC / X86 CPUs and architecture including Intel, AMD, MRVL Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum analyzer Qualify alternative components for compatibility, cost effectiveness and benchmarking System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval. Work with software teams to identify root cause of system failure Working knowledge of windows & Linux configuration, installation procedure, network configuration, driver configuration etc. Working knowledge of Diag, ONIE, BIOS, BMC, Linux and Windows operating systems Knowledge of the following would be desirable: Experience of working in medium sized multidisciplinary development teams Ethernet Switches, Server, Storage products Orcad Schematics & Allegro PCB layout tools

Physical Demands

Duties of this position are performed in a normal office environment. Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data. Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required. Occasional travel may be required.

Typical Experience

4 to 6 years in a similar role or industry.

Typical Education

Bachelor degree or consideration of an equivalent combination of education and experience.

Educational Requirements may vary by Geography

Notes

This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

Company Overview

Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services. Seniority level

Seniority level Mid-Senior level Employment type

Employment type Full-time Job function

Job function Engineering and Information Technology Industries Manufacturing Referrals increase your chances of interviewing at Celestica by 2x Continue with Google Continue with Google Penang, Malaysia MYR200,000 - MYR250,000 2 days ago Expression of Interest : Jobs for Electrical & Electronic Engineer Graduates

Expression of Interest : R&D Hardware Engineer

Manufacturing Design Engineer (based in Penang)

Expression of Interest : R&D Hardware Engineer

Principal / Senior R&D Engineer (Electrical & Electronics)

Graduate Trainee- Silicon Design Engineer (RTL)

Expression of Interest: R&D RF Hardware Engineer

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

As a Hardware Test Engineer, you will design and develop test processes for computer hardware and related equipment. Your role includes creating test plans and equipment, implementing and monitoring test procedures, and conducting hardware product validations to ensure performance and reliability. Key responsibilities:

Execute Radio Frequency Performance Test Cases defined in 3GPP. Execute power consumption, audio, EMC, signal integrity test cases. Execute the use case testing for the producible categories of 2G/3G/4G/5G/BT/WIFI product. Execute the verification of the version, golden board, production testing tools, and fixtures. Document detail test reports of product, create concise summary of the test findings for customer reference. Design a simple project testing strategy. Support FAE/sales/certification teams in resolving test issues. Submit test bugs and track the closed loop. Qualifications required:

Bachelor's degree in electronic, information, or wireless communication engineering. Basic knowledge of electronic, telecommunications, computer science. Proficiency in using spectrum analyzers, oscilloscopes, power supplies, network analyzers, and integrated meters. Fresh graduates are encouraged to apply. Preferred skills and experience:

Preference for candidates with testing experience in RF, EMC, Reliability, and Signal Integrity. Familiarity with wireless communication protocols is desirable. Strong problem solving and analytical skills. Initiative and independence in solving daily tasks. Fluency in English and Mandarin is essential. Ability to adapt to diverse cultural and work environments. Willingness to travel is necessary. We offer:

The opportunity to work with cutting-edge technologies and state-of-the-art equipment. Involvement in the latest mobile technology chipsets and exciting industry projects. Strong opportunities for professional growth and career development. Comprehensive benefits, quarterly and yearly team-building events, and more.

#J-18808-Ljbffr

Get AI-powered advice on this job and more exclusive features. Responsible for hardware AE technical support in debugging and resolving on cellular and non-cellular wireless communication module products for customers. Provide reliable HW design solutions to customers according to their actual applications. Coordinate between different teams (like CPM, FAE etc.) in resolving customer’s HW related issues in a timely manner. Review the SCH and PCB design files of customer's device using EDA tools. Support to solve the problems encountered in customer’s devices by utilizing analyzing, troubleshooting and debugging skills. Assist customers in hardware related queries and concerns with prompt replies. Qualification requirements: Bachelor’s degree in Electrical/Electronics/Communication/Microwave or equivalent with related knowledge of Principle of Communication & Technology. Familiar with IC system devices and features of some common communication interfaces such as power management, audio codec, USB2.0/3.0, UART, PCM, SDIO, PCIE. Able to use EDA tools and pick up the key information of a datasheet. Good at pressure handling, strain capacity, logical thinking and problem-solving abilities. Able to (Speak/Write/Listen) in Mandarin are added advantage as the position need to liaise with counterpart. Minimum 3 years of working experiences in related field. Seniority level

Seniority level Mid-Senior level Employment type

Employment type Full-time Job function

Industries Telecommunications Referrals increase your chances of interviewing at Quectel by 2x Get notified about new Application Engineer jobs in

Bayan Lepas, Penang, Malaysia . Service & Application Engineer / Mechanical & Electrical Engineer

Principal / Technologist, Automation & Analytics Development Engineering

(Fresh Grad ONLY - Intake July 2025 onwards) Engineer, Business Process Management

Application Sales Engineer (Factory Automation) - Based in Penang

George Town, Penang, Malaysia 1 month ago Field Application Engineer (SEG, Penang)

Project Engineer (Project Management and Development)

Senior Engineer, Software Development Engineering

Kulim, Kedah, Malaysia MYR3,500.00-MYR4,500.00 1 month ago We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Press Tab to Move to Skip to Content Link Select how often (in days) to receive an alert: Hardware Design Engineer

Date:

Apr 11, 2025 Location:

Penang, 07, MY The Senior Lead Engineer, Electrical Design develops new electrical systems/circuits for various applications. Research system ideas and draw up plans for these systems, and capture them in schematics and system specifications. Test, simulate, validate and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing of the electrical systems they have designed. The Senior Lead Engineer, Electrical Design works in cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations. Detailed Description

Duties Identify technical issues, troubleshoot and resolve them by coordinating with R&D, Manufacturing and Field teams Participate in customer technical meetings and prepare training programs for internal subordinates. Hardware validation of Networking, Storage, Server products against customer’s infield issues, requirements and Mfg. issues during NPI or RMA System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval. Qualify alternative components for compatibility, cost effectiveness and benchmarking Support Manufacturing Engineering and Test Engineers on trouble shooting and resolving technical issues and root cause analysis Work with software teams to identify root cause of system failure Ability to install software such as Linux based Operating Systems, ONIE, BIOS, BMC, SES Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum Candidates should have 8+ years' experience in either Network, Storage or Server products. Strong electrical design and debug skills required Familiar with PCIe, NVMe, SAS, SATA, I2C, SPI, DDR buses SDRAM timing and integrity analysis for clocks, strobes, S&H, Power bounce, temp stability Hands-on design knowledge of latest peripheral chipsets for Gigabit Ethernet, SCSI, SATA, SAS, USB, Ethernet, & PCI cards etc. High performance RISC / X86 CPUs and architecture including Intel, AMD, MRVL Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum analyzer Qualify alternative components for compatibility, cost effectiveness and benchmarking System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval. Work with software teams to identify root cause of system failure Working knowledge of windows & Linux configuration, installation procedure, network configuration, driver configuration etc. Working knowledge of Diag, ONIE, BIOS, BMC, Linux and Windows operating systems Knowledge of the following would be desirable: Experience of working in medium sized multidisciplinary development teams Ethernet Switches, Server, Storage products Orcad Schematics & Allegro PCB layout tools Physical Demands

Duties of this position are performed in a normal office environment. Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data. Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required. Occasional travel may be required. Typical Experience

4 to 6 years in a similar role or industry. Typical Education

Bachelor degree or consideration of an equivalent combination of education and experience. Educational Requirements may vary by Geography Notes

This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time. Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law). At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them. COMPANY OVERVIEW: Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers. Celestica would like to thank all applicants, however, only qualified applicants will be contacted. Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

#J-18808-Ljbffr

Join to apply for the

Hardware Assistant Engineer

role at

Bitdeer (NASDAQ: BTDR) 5 days ago Be among the first 25 applicants Join to apply for the

Hardware Assistant Engineer

role at

Bitdeer (NASDAQ: BTDR) About Bitdeer

Bitdeer Technologies Group (Nasdaq: BTDR) is a world-leading technology company for Bitcoin mining. Bitdeer is committed to providing comprehensive computing solutions for its customers. The Company handles complex processes involved in computing such as equipment procurement, transport logistics, datacenter design and construction, equipment management, and daily operations. The Company also offers advanced cloud capabilities to customers with high demand for artificial intelligence. Headquartered in Singapore, Bitdeer has deployed datacenters in the United States, Norway, and Bhutan. About Bitdeer

Bitdeer Technologies Group (Nasdaq: BTDR) is a world-leading technology company for Bitcoin mining. Bitdeer is committed to providing comprehensive computing solutions for its customers. The Company handles complex processes involved in computing such as equipment procurement, transport logistics, datacenter design and construction, equipment management, and daily operations. The Company also offers advanced cloud capabilities to customers with high demand for artificial intelligence. Headquartered in Singapore, Bitdeer has deployed datacenters in the United States, Norway, and Bhutan.

What You Will Be Responsible For

Assist hardware engineers in the development and testing of server-related products. Responsible for hardware functional testing, component stress testing, reliability testing, EMC, and safety compliance testing of server products and others. Based on relevant industry standards and national regulations, assist in formulating hardware testing requirements, designing testing plans, drafting hardware test procedures, and related standards, as well as compiling test results and reports. Follow up on hardware issues until they are resolved. Assist the R&D team in improving company standards and regulations, drafting test cases, and test plans.

How You Will Stand Out

Keen and meticulous observational skills, with sensitivity to testing issues and phenomena. More than two years of experience in hardware development or testing, with a basic understanding of server testing; candidates with embedded hardware development experience are preferred. Familiar with EMC and EMI-related IEC standards, national standards, and environmental testing standards, with a solid understanding of hardware testing principles and methods. Proficient in using various electronic measuring instruments, devices, and test fixtures. Solid theoretical foundation in digital circuits, analog circuits, communication principles, and microcontroller fundamentals. Proficiency in English, with the ability to read and interpret English documentation. Passionate about hardware testing, with a meticulous, responsible, self-reflective, and proactive attitude. Able to work under pressure, with strong hands-on skills, good communication abilities, and strong team collaboration spirit.

What You Will Experience Working With Us

A culture that values authenticity and diversity of thoughts and backgrounds; An inclusive and respectable environment with open workspaces and exciting start-up spirit; Fast-growing company with the chance to network with industrial pioneers and enthusiasts; Ability to contribute directly and make an impact on the future of the digital asset industry; Involvement in new projects, developing processes/systems; Personal accountability, autonomy, fast growth, and learning opportunities; Attractive welfare benefits and developmental opportunities such as training and mentoring.

Bitdeer is committed to providing equal employment opportunities in accordance with country, state, and local laws. Bitdeer does not discriminate against employees or applicants based on conditions such as race, colour, gender identity and/or expression, sexual orientation, marital and/or parental status, religion, political opinion, nationality, ethnic background or social origin, social status, disability, age, indigenous status, and union. Seniority level

Seniority level Entry level Employment type

Employment type Full-time Job function

Job function Engineering and Information Technology Industries Software Development Referrals increase your chances of interviewing at Bitdeer (NASDAQ: BTDR) by 2x Sign in to set job alerts for “Hardware Engineer” roles.

Expression of Interest : Jobs for Electrical & Electronic Engineer Graduates

R&D Staff Electronic Development Engineer

Senior Electrical Control Design Engineer

(Fresh Grad ONLY) Engineer, Business Process Management

C++ Software Engineer (MYR 8k-15k / month)

Georgetown, Penang, Malaysia 3 months ago Expression of Interest : R&D Hardware Engineer

(Fresh Grads ONLY) - Engineer, Quality Assurance Engineering

Expression of Interest: R&D RF Hardware Engineer

Principal / Technologist, Automation & Analytics Development Engineering

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Talent Acquisition @ UST | Talent Sourcing, Recruitment Strategies

Job Description We are looking for a Hardware Design Engineer to support our client services, including but not limited to BOM, schematic, and layout of platforms for the next generation of CPU/GPU/PCH. These platforms will be used by the validation team to validate CPUs, PCHs, and GPUs across different segments such as Server, Client, Graphics, and Device divisions. Key Responsibilities: Collaborate with multiple teams including layout, materials, power delivery, signal integrity, package design, board validation, software coding, and other board design teams to deliver high-quality board designs that meet platform and system-level electrical requirements, high-speed digital signal requirements, DFT, and DFM standards. Utilize Allegro Design Entry HDL (ConceptHDL) and Allegro PCB Designer for schematic editing and PCB layout review. Manage BOMs using Speed and troubleshoot hardware issues in the lab using equipment like oscilloscopes and logic analyzers. Have a solid understanding of PCB routing topology, design guidelines, layout placement strategies, PCB stack-up technology, and interfaces such as DDR, PCIe, USB, etc. Develop technical knowledge in architecture, memory types, power delivery, power management, and high-speed IO buses. Proficiency in hardware description languages such as Verilog, VHDL, or SystemVerilog. Experience with test automation scripting and programming languages. Familiarity with FPGA and ASIC design flows. Experience in logic design for high-speed interfaces, memory controllers, or DSP is advantageous. Development experience with FPGA and CPLD. Requirements: Bachelor's degree in Electrical Engineering, Electronics, or related hardware fields. Good knowledge of PC architecture, electronic components, basic circuit design, etc. Strong analytical and debugging skills with problem-solving capabilities. Effective communication, documentation, and teamwork skills. Additional knowledge of schematic capture, simulation, and software programming is preferred. Seniority level

Associate Employment type

Full-time Job function

IT Services and IT Consulting Referrals can increase your chances of interviewing at UST by 2x. Sign in to set job alerts for “Hardware Design Engineer” roles.

Location: Penang, Malaysia | Salary: MYR200,000.00 - MYR250,000.00 | Posted: 1 week ago

#J-18808-Ljbffr

Expression of Interest: R&D RF Hardware Engineer

Overview

Keysight is on the forefront of technology innovation, delivering breakthroughs and trusted insights in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~15,000 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Learn more about what we do. Overview

Keysight is on the forefront of technology innovation, delivering breakthroughs and trusted insights in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~15,000 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Learn more about what we do.

Our award-winning culture embraces a bold vision of where technology can take us and a passion for tackling challenging problems with industry-first solutions. We believe that when people feel a sense of belonging, they can be more creative, innovative, and thrive at all points in their careers.

Responsibilities

Job Description:

Leads the design and development of new product/process technology. Candidate will be responsible for developing microwave/Millimeterwave test accessories (e.g. mixers, solid state switches, amplifiers, noise source, etc.) for launch as trade products and contribute to the growth of the business. During product development, performance goals, cost goals and project schedule must be met. Candidate is highly encouraged to periodically publish (internal and/or external) technical paper or application notes related to the products being developed. Uses product and customer applications knowledge to determine, define, develop and validate design concepts and methods.

Qualifications

Qualifications:

PhD / Master / Bachelor’s Degree in Electrical / Electronics / Telecommunications / RF & Microwave engineering or equivalent Typically, more than 5 years of working experience with at least 3 years in RF/Microwave products Strong core knowledge in passive components (resistors, capacitors, inductors), transmission line theory and basic RF components such as mixers, couplers, amplifiers and switches, is required Able to use instruments such as Network Analyzers, Spectrum Analyzers and Oscilloscopes and perform the necessary calibration and measurement Knowledge in simulation/engineering software tools such as ADS/Momentum/MATLAB/EMPro will be a great add

Careers Privacy Statement

***Keysight is an Equal Opportunity Employer.*** Seniority level

Seniority level Not Applicable Employment type

Employment type Full-time Job function

Job function Engineering and Information Technology Industries Appliances, Electrical, and Electronics Manufacturing Referrals increase your chances of interviewing at Keysight Technologies by 2x Get notified about new Research and Development Hardware Engineer jobs in

Mukim 10 (Bukit Relau), Penang, Malaysia . Expression of Interest : R&D Hardware Engineer

Expression of Interest : R&D Hardware Engineer

Senior Staff Hardware Development and Test Eng.

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Get AI-powered advice on this job and more exclusive features.

The successful candidate will be a self-starter who likes to take responsibility and works best with little supervision. Likes to perform a variety of tasks and have the ability to handle multiple priorities and has previously performed in a similar position. This is a 'hands-on' role requiring a strong technical background and product development experience.

Duties

• Identify technical issues, troubleshoot and resolve them by coordinating with R&D, Manufacturing and Field teams
• Participate in customer technical meetings and prepare training programs for internal subordinates.
• Hardware validation of Networking, Storage, Server products against customer’s infield issues, requirements and Mfg. issues during NPI or RMA
• System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval.
• Qualify alternative components for compatibility, cost effectiveness and benchmarking
• Support Manufacturing Engineering and Test Engineers on trouble shooting and resolving technical issues and root cause analysis
• Work with software teams to identify root cause of system failure
• Ability to install software such as Linux based Operating Systems, ONIE, BIOS, BMC, SES
• Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum

Background

Candidates should have 8+ years' experience in either Network, Storage or Server products.

Candidates should have the following essential qualifications and experience:

• At least BEng. (Hons.) in Electronics or similar
• Strong electrical design and debug skills required
• Familiar with PCIe, NVMe, SAS, SATA, I2C, SPI, DDR buses
• SDRAM timing and integrity analysis for clocks, strobes, S&H, Power bounce, temp stability
• Hands-on design knowledge of latest peripheral chipsets for Gigabit Ethernet, SCSI, SATA, SAS, USB, Ethernet, & PCI cards etc.
• High performance RISC / X86 CPUs and architecture including Intel, AMD, MRVL
• Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum analyzer
• Qualify alternative components for compatibility, cost effectiveness and benchmarking
• System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval.
• Work with software teams to identify root cause of system failure
• Working knowledge of windows & Linux configuration, installation procedure, network configuration, driver configuration etc.
• Working knowledge of Diag, ONIE, BIOS, BMC, Linux and Windows operating systems

Knowledge of the following would be desirable:

• Experience of working in medium sized multidisciplinary development teams
• Ethernet Switches, Server, Storage products
• Orcad Schematics & Allegro PCB layout tools

Personal Attributes

The successful candidate will be a self-motivated individual capable of working with a minimum level of supervision in a dynamic team environment. Good interpersonal skills. Be able to communicate effectively (both verbal and written) with members of other teams, departments and clients; a high degree of liaison is needed.

Seniority level

• Seniority level Mid-Senior level

Employment type

• Employment type Full-time

Job function

• Industries Manufacturing

Referrals increase your chances of interviewing at Celestica by 2x

Sign in to set job alerts for “Hardware Design Engineer” roles. Electrical Design Engineer (Chinese Speaking) Expression of Interest : R&D Hardware Engineer Expression of Interest : Jobs for Electrical & Electronic Engineer Graduates

Penang, Malaysia MYR200,000 - MYR250,000 4 days ago

Manufacturing Design Engineer (based in Penang) Expression of Interest : R&D Hardware Engineer Electrical Senior Engineer (new role based in Kulim High Tech Park, Kedah) Expression of Interest: R&D RF Hardware Engineer Principal / Senior R&D Engineer (Electrical & Electronics) Expression of Interest: R&D RF Hardware Engineer Expression of Interest : Jobs for Electrical & Electronic Engineer Graduates Graduate Trainee- Silicon Design Engineer (RTL)

Mukim 10 (Bukit Relau), Penang, Malaysia 15 hours ago

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr