134 Utility Maintenance jobs in Malaysia

This job is all about keeping things running smoothly! You’d maintain and repair kitchen equipment and facilities. You might like this job because you enjoy problem-solving and ensuring everything works safely and efficiently.

• Perform scheduled preventive maintenance on kitchen equipment, machinery, electrical systems, and facilities.
• Troubleshoot, diagnose, and repair mechanical, electrical, or plumbing issues.
• Ensure minimal downtime and quick response to breakdowns.

2. Equipment & Facility Management

• Install, maintain, and repair kitchen equipment (e.g., stoves, ovens, refrigerators, chillers, air-conditioning units).
• Inspect and maintain building utilities such as lighting, wiring, piping, and water supply.
• Monitor safety and efficiency of facilities, ensuring compliance with safety standards.

3. Record Keeping & Reporting

• Maintain service logs, repair records, and maintenance schedules.
• Report recurring issues and recommend solutions to management.
• Keep inventory of tools, spare parts, and maintenance supplies.

4. Safety & Compliance

• Follow safety guidelines during repair and maintenance work.
• Ensure all equipment complies with regulatory and health standards.
• Support workplace safety inspections and audits.

5. Support & Teamwork

• Assist in setup or relocation of equipment when required.
• Provide technical support to staff regarding safe and proper use of equipment.
• Coordinate with external contractors or vendors for specialized repairs when necessary.

Required Skills & Competencies

• Basic knowledge of electrical, mechanical, and plumbing systems .
• Hands-on skills in troubleshooting and repairing kitchen/industrial equipment .
• Ability to read technical manuals, wiring diagrams, and maintenance instructions.
• Familiarity with tools, measuring devices, and safety equipment.
• Good problem-solving skills & attention to detail.
• Ability to work independently and respond quickly in urgent situations.
• Certificate/Diploma in Mechanical, Electrical, or Facility Maintenance (or equivalent).
• Prior experience as a Technician or Maintenance staff (F&B / hospitality industry an advantage).
• Physically fit and willing to work on-call or during off-hours if emergencies arise.

Creative Thinking

Problem Solving

Troubleshooting (Problem Solving)

Critical Thinking

Independent Thinking

Contribution of EPF & SOCSO provided

Worried about parking fee for work? We got you covered!

We prepare bonuses for those high-performing employees. You will get the rewards if you achieve company targets!

Yearly Annual dinners, festive season dinner, events and etc

Peak Kitchen Sdn Bhd, with over 30 years of experience in the food and beverages industry, specializes in chicken rice and dim sum cuisines for all races. We also venture into fine dining omakase cuisine.

Select how often (in days) to receive an alert: Create Alert

This Job Profile is not validated by Subject Matter Experts yet.

Perform all-around maintenance and repair services in several crafts such as electrical, carpentry, welding, plumbing, sheet metal, painting, and mill-wrighting at a moderately complex level. Apply journey level skills in a primary craft gained from practical experience. Possess an in-depth understanding of maintenance history of the building, equipment, and other facilities to be maintained. Use expertise for diagnosis and emergency repairs, provide preventive and cost-efficient repairs, use all shop machinery and hand tools, act as leader for less-skilled assistants, consult with engineers and vendors.

Equipment Maintenance and Repair

Carry out simple maintenance and repair tasks, following detailed instructions and working under close supervision to complete the allocated tasks.

Operating Machine or Equipment

Operate various equipment and machines, adjusting one or more variables to achieve efficiency.

Solutions Analysis

Assess compliance with established standards and protocols for parts of routine enquiries.

Quality

Perform relatively simple quality sampling and inspection of products or processes (or both).

Health, Safety and Environment

Follow a range of mandatory work instructions (including use of personal protection equipment where relevant) to safeguard the environment and the wellbeing of oneself and others.

Operations Management

Carry out operational tasks by following established processes. May involve adjusting basic settings or parameters in order to meet performance standards.

Work Scheduling and Allocation

Organize own work schedule each day in line with changing priorities.

Operational Compliance

Follow a range of mandatory procedures to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.

Personal Capability Building

Develop and maintain excellent procedural or technical skills by participating in assessment and development planning activities as well as formal and informal training and coaching.

JOB DESCRIPTION

1. Troubleshoot and repair plant facilities, machinery, equipment, and tooling to meet performance expectations.
2. Report inspection of machine conditions, log repair events, and manage spare part inventory according to facility department system procedures.
3. Carry out preventive maintenance activities or improvement programs to reduce breakdown downtime, especially related to electrical supply.
4. Assist the facility engineer in continuously improving machinery, facilities, and tooling performance.
5. Ensure vendor work meets expectations and complies with HSE and Suruhanjaya Tenaga procedures.
6. Support new machine or facility electrical panel distribution and cabling work.

JOB REQUIREMENTS

1. Minimum certification of Suruhanjaya Tenaga Chargeman level A0.
2. Willingness to work in standby mode for emergency breakdowns.
3. Ability to work independently and as part of a team.
4. Good communication skills, with proficiency in English for internal stakeholder management.

Press Tab to Move to Skip to Content Link

Select how often (in days) to receive an alert:

Select how often (in days) to receive an alert:

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe.

Maintenance Technician

1. Equipment Maintenance & Troubleshooting
• Perform preventive/corrective maintenance and troubleshoot equipment issues.

2. Sterilization Process Monitoring
• Ensure sterilization equipment operates within specified parameters.

3. Calibration & Documentation
• Calibrate equipment and maintain accurate records of all maintenance and inspections.

4. Safety & Compliance
• Follow safety protocols and ensure compliance with radiation safety regulations.

5. Plant Operations
• Oversee daily radiation plant operations and minimize downtime.

6. Process Improvement
• Analyze and enhance irradiation processes for better efficiency and quality.

7. Quality Assurance
• Ensure consistent process quality and support audits and validations.

8. Project Management
• Lead projects involving equipment installation, upgrades, and coordination with suppliers.

9. Technical Support & Training
• Serve as SME; support and train plant staff on radiation systems and best practices.

10. Radiation Protection
• Act as Radiation Protection Officer, managing radioactive materials and ensuring safety compliance.

11. Reporting
• Prepare reports on operations, safety, and project status for management review.

High School Diploma or GED in Electrical Engineering or Electronics

Min 2 years experience

Pay rate for this opportunity is $ (INSERT) .This position is incentive plan eligible, at target earnings of $ (INSERT RANGE).

Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc.

STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits:STERIS Benefits

STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity and the use of affirmative action programs to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity.

The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location’s HR Office during normal business hours.

Job Segment: Electrical Engineering, Maintenance, QA, Quality Assurance, Electrical, Engineering, Manufacturing, Technology, Quality

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe.

Maintenance Technician

1. Equipment Maintenance & Troubleshooting
   Perform preventive/corrective maintenance and troubleshoot equipment issues.
2. Sterilization Process Monitoring
   Ensure sterilization equipment operates within specified parameters.
3. Calibration & Documentation
   Calibrate equipment and maintain accurate records of all maintenance and inspections.
4. Safety & Compliance
   Follow safety protocols and ensure compliance with radiation safety regulations.
5. Plant Operations
   Oversee daily radiation plant operations and minimize downtime.
6. Process Improvement
   Analyze and enhance irradiation processes for better efficiency and quality.
7. Quality Assurance
   Ensure consistent process quality and support audits and validations.
8. Project Management
   Lead projects involving equipment installation, upgrades, and coordination with suppliers.
9. Technical Support & Training
   Serve as SME; support and train plant staff on radiation systems and best practices.
10. Radiation Protection
    Act as Radiation Protection Officer, managing radioactive materials and ensuring safety compliance.
11. Reporting
    Prepare reports on operations, safety, and project status for management review.

High School Diploma or GED in Electrical Engineering or Electronics required. Minimum 2 years of relevant experience.

Pay rate for this opportunity is $(INSERT). This position is incentive plan eligible, at target earnings of $(INSERT RANGE). Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on factors including but not limited to local labor market costs, experience, education, certifications, language skills, etc.

STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits .

STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity and affirmative action programs to ensure fair treatment in all employment actions regardless of race, color, religion, age, disability, national origin, citizenship, military or veteran status, sex, sexual orientation, gender identity, genetic information, or any other protected category. As a federal contractor, we are bound by these principles and policies. The full affirmative action program is available for inspection at your location’s HR Office during normal hours.

This job involves maintaining the smooth operation of production machines. You will be responsible for repairing equipment, performing routine maintenance, and supervising contractors. The role suits individuals who enjoy hands-on work and problem-solving in a team environment.

Main Responsibilities

• Effectively repair all production equipment and machinery without delay
• Conduct planned and preventive maintenance to reduce downtime
• Install new equipment and machinery
• Supervise contractors during their tasks
• Perform additional tasks as required

Additional Tasks

• Any other duties assigned from time to time

Minimum Certificate in a related field (Electrical certification is an advantage)

• Ability to work independently with minimal supervision
• Motivated and responsible
• Strong interest in mechanical work
• Effective communication skills at all levels
• At least 1 year of relevant experience

Sika was established in Malaysia in 1989, with full operations beginning in 1991 through its subsidiary, Sika Kimia Sdn Bhd. The company has since become a leading player in construction and industrial applications, serving a broad range of project types and maintaining a strong local and international presence.

Our construction activities encompass infrastructural projects, buildings, institutional facilities, and manufacturing plants. We serve customers including concrete producers, contractors, and distributors through our central and regional offices. Our industry division is a market leader in automotive glass replacement and bonding, sealing, damping, and protection solutions for various transportation and industrial sectors.

Sika Kimia Sdn Bhd employs over 340 staff across various departments, including Sales & Marketing, Technical Service, Finance, HR, Laboratory, Production, Purchasing, Customer Service, and Warehouse.

As an international company, we value diversity and encourage employees to take international assignments, facilitating knowledge sharing across our global locations.

We believe diversity contributes to our success and promote an inclusive work environment. Sika is a leading global chemicals company specializing in bonding, sealing, damping, reinforcement, and protection systems for the building and automotive industries, with operations in over 103 countries and more than 400 factories worldwide.

Job Description:

• Install, modify, service and upgrade machinery and equipment.
  
• Perform periodic machinery preventive maintenance.
  
• Troubleshoot and resolves day-to-day technical problems on the production lines.
  
• Develops, plans, designs and constructs electrical systems, equipment and plant when maintenance solutions are required.
  
• Monitor machinery and equipment performance and ensure prompt response to machine breakdown.

Job Requirements:

• Required languages: English & Bahasa Malaysia. Mandarin is added advantage
  
• Candidate must possess at least Certificate in Diploma /Advance/Higher, Bachelors Degree in major in Mechanical Engineering or equivalent.
  
• Experience in automation would have strong advantage.
  
• Deep knowledge with problem solve skills included mechanically and electrically.
  
• Required Skill(s): Computer Literate, Microsoft word, excel, power point etc.

Salary Range:

• From RM2800 to RM4000

Fix plumbing, electrical, or mechanical problems.

Follow safety rules (DOSH).

Assist in emergencies (power cuts, leaks, breakdowns).

Keep track of tools and supplies.

Perform small repairs like painting or minor fixes.

Maintain a safe and clean workplace.

Salary match, Number of applicants, Skills match

Your application will include the following questions:

• What is your expected monthly basic salary?
• Which of the following qualifications do you have?
• How many years' experience do you have as a Maintenance Technician?

Industry: Manufacturing, Transport & Logistics

Company: Sauce Empire Manufacturing Sdn Bhd, Malaysia

Established in 2000, supplying to food service sectors and introducing Asian Taste worldwide. Our flagship brand Nyolike is popular among hotels, restaurants, cafes, and hawker stalls in Malaysia.

To help speed up investigation, include any relevant details that prompted you to report this job ad as fraudulent, misleading, or discriminatory.

What can I earn as a Maintenance Technician?

• A new manufacturing facility is being established in Senai Ipark, Johor Bahru, specializing in medical devices, injection molding, and precision engineering. We welcome talent with relevant industry experience to apply. For the right candidate, our client is prepared to offer up to a 30% increase on your current salary.
  

Job Description:

1. Equipment Maintenance & Repair:

• Perform routine preventive maintenance on production equipment and machinery to ensure optimal performance and minimize downtime.
• Diagnose, troubleshoot, and repair equipment issues, particularly those related to molding machines and ancillary equipment.

2. Molding & Medical Plastics Expertise:

• Apply your expertise in molding to ensure that all equipment is properly maintained and calibrated for the production of high-quality plastic products, including medical-grade plastics.
• Support the setup and maintenance of equipment specifically used in the manufacturing of medical products, ensuring compliance with industry standards.

3. Preventive Maintenance:

• Develop and implement preventive maintenance schedules for all critical machinery and equipment.
• Keep accurate records of all maintenance activities, including repairs, adjustments, and parts replacements.
• Participate in continuous improvement initiatives aimed at enhancing equipment reliability, reducing downtime, and improving production efficiency.
• Collaborate with the engineering and production teams to identify and implement process improvements related to equipment performance.

5. Safety & Compliance:

• Ensure that all maintenance activities are carried out in accordance with safety protocols and company policies.
• Comply with industry standards and regulations, particularly those related to the maintenance of equipment used in medical plastics manufacturing.

6. Spare Parts Management:

• Monitor inventory levels of spare parts and tools required for maintenance activities, ensuring timely procurement and availability.
• Work with suppliers to source high-quality spare parts and components as needed.

7. Training & Support:

• Provide training and guidance to production operators on the proper use and maintenance of equipment.
• Assist in the installation and commissioning of new machinery and equipment.

Job Requirements:

• Diploma or certification in Mechanical Engineering, Electrical Engineering, or a related field.
  
• A minimum of 5 years of experience as a Maintenance Technician, with a strong background in molding within the plastic manufacturing industry.
  
• Expertise in medical plastics is a significant advantage.
  
• Proficient in troubleshooting and repairing industrial machinery, particularly molding machines and related equipment.
  
• Fluent in Mandarin, both written and spoken, to effectively communicate with Mandarin-speaking colleagues and stakeholders.