53 Senior Engineer Test Manufacturing Debug jobs in Malaysia

**In This Role, Your Responsibilities Will Be:**
+ Safety First: Protect system users by identifying hazards, engineering safeguards, creating safe procedures, and defining necessary PPE (Personal Protective Equipment).
+ Design, develop and implement production test hardware and software.
+ Standardize product quality test processes across all manufacturing sites globally.
+ Simplify, Standardize and Automate manufacturing test processes.
+ Work with global Design Engineering groups on Design for Testability (DFT).
+ Integrate test processes with factory MES systems.
+ Conceptualize product test needs to build BOM for complex test systems.
+ Configure server and network infrastructure required for test processes.
+ Stay ahead of innovative technologies and Champion Industry Best Practices.
+ Mentor other technicians on products and processes. Guide troubleshooting efforts when raised.
+ Drive appropriation of funds and procure material by placing orders with vendors.
+ Develop, write, maintain system documentation, and train operators on working level documents and standing instructions as required.
+ Perform capacity analysis for production work cells to determine test needs. Make recommendations on production processes.
+ Identify programmable devices in products and define processes for programming them.
+ Work with Quality engineers and technicians on customer quality issues and failure analysis to put processes in place to prevent future escapes.
+ Provide technical expertise to address complex problems
+ Develop and drive digitization tools to give partners information needed to make good and timely decisions.
+ Define and maintain automated data capture on all test equipment for quality analysis and traceability.
+ Navigate PC/software as required.
+ Finish all assigned training and maintain any certifications as required including Electrical Safety training and quality IPC Level 2.
**Who You Are:**
You follow through on commitments and make sure others do the same. You act with a clear sense of ownership, take personal responsibility for decisions, actions, and failures, establish clear responsibilities and processes for spearheading work and measuring results. You craft feedback loops into work.
You are effective in communication settings: one-on-one, small and large groups, or among diverse styles and position levels. Attentively listen to others, adjust to fit the audience and the message and provide timely and effective information to others across the organization.
You work successfully with team members to achieve shared objectives, represent own interests while being fair to others and their areas as well as partner with collaborators to get work done.
You take ownership of your area and follow safe work practices, reporting all hazards and incidents to your supervisor immediately. You help define safe work practices and support concepts of "I Own Safety".
**For This Role, You Will Need:**
+ Strong knowledge of electronics. Associate degree in electronics or equivalent.
+ 5-10 years of experience in electronics manufacturing with some knowledge of manufacturing methods, procedures, processes, and test techniques.
+ Demonstrated problem-solving expertise.
+ Familiarity with engineering practices and the interpretation of drawing and specifications.
+ Demonstrated communication/interpersonal/personal computer literacy. Ability to work well with co-workers and external customers.
+ Computer programming experience (E.g., Delphi, C/C++, VB, python, Ladder Logic, XML, HTML, SQL, CSS, and Linux bash scripts etc.).
+ Ability to lift 30 lbs.
+ Ability to distinguish colors.
**Preferred Qualifications That Set You Apart:**
+ Bachelor's degree in electronics or computer science.
+ Working knowledge of CAD, SAP, and Agile.
**Our Culture & Commitment to You:**
At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results.
We recognize the importance of employee wellbeing. We prioritize providing competitive benefits plans, a variety of medical insurance plans, Employee Assistance Program, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.
**Requisition ID** :
Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

**In This Role, Your Responsibilities Will Be:**
+ Safety First: Protect system users by identifying hazards, engineering safeguards, creating safe procedures, and defining necessary PPE (Personal Protective Equipment).
+ Design, develop and implement production test hardware and software.
+ Standardize product quality test processes across all manufacturing sites globally.
+ Simplify, Standardize and Automate manufacturing test processes.
+ Work with global Design Engineering groups on Design for Testability (DFT).
+ Integrate test processes with factory MES systems.
+ Conceptualize product test needs to build BOM for complex test systems.
+ Configure server and network infrastructure required for test processes.
+ Stay ahead of innovative technologies and Champion Industry Best Practices.
+ Mentor other technicians on products and processes. Guide troubleshooting efforts when raised.
+ Drive appropriation of funds and procure material by placing orders with vendors.
+ Develop, write, maintain system documentation, and train operators on working level documents and standing instructions as required.
+ Perform capacity analysis for production work cells to determine test needs. Make recommendations on production processes.
+ Identify programmable devices in products and define processes for programming them.
+ Work with Quality engineers and technicians on customer quality issues and failure analysis to put processes in place to prevent future escapes.
+ Provide technical expertise to address complex problems
+ Develop and drive digitization tools to give partners information needed to make good and timely decisions.
+ Define and maintain automated data capture on all test equipment for quality analysis and traceability.
+ Navigate PC/software as required.
+ Finish all assigned training and maintain any certifications as required including Electrical Safety training and quality IPC Level 2.
**Who You Are:**
You follow through on commitments and make sure others do the same. You act with a clear sense of ownership, take personal responsibility for decisions, actions, and failures, establish clear responsibilities and processes for spearheading work and measuring results. You craft feedback loops into work.
You are effective in communication settings: one-on-one, small and large groups, or among diverse styles and position levels. Attentively listen to others, adjust to fit the audience and the message and provide timely and effective information to others across the organization.
You work successfully with team members to achieve shared objectives, represent own interests while being fair to others and their areas as well as partner with collaborators to get work done.
You take ownership of your area and follow safe work practices, reporting all hazards and incidents to your supervisor immediately. You help define safe work practices and support concepts of "I Own Safety".
**For This Role, You Will Need:**
+ Strong knowledge of electronics. Associate degree in electronics or equivalent.
+ 5-10 years of experience in electronics manufacturing with some knowledge of manufacturing methods, procedures, processes, and test techniques.
+ Demonstrated problem-solving expertise.
+ Familiarity with engineering practices and the interpretation of drawing and specifications.
+ Demonstrated communication/interpersonal/personal computer literacy. Ability to work well with co-workers and external customers.
+ Computer programming experience (E.g., Delphi, C/C++, VB, python, Ladder Logic, XML, HTML, SQL, CSS, and Linux bash scripts etc.).
+ Ability to lift 30 lbs.
+ Ability to distinguish colors.
**Preferred Qualifications That Set You Apart:**
+ Bachelor's degree in electronics or computer science.
+ Working knowledge of CAD, SAP, and Agile.
**Our Culture & Commitment to You:**
At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results.
We recognize the importance of employee wellbeing. We prioritize providing competitive benefits plans, a variety of medical insurance plans, Employee Assistance Program, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.
**Requisition ID** :
Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

SR MANUFACTURING ENGINEER
At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.
**Job Overview**
TE Connectivity's Manufacturing Engineering Teams are process leaders for stamping, molding or assembly related topics, ensuring the processes are running at optimum levels for quality and output. They are experts in mold tooling, die tooling, machining, and assembly techniques, possessing extensive knowledge of the associated manufacturing processes which may include the optimization and standardization of stamping / molding / assembly or other processes within the manufacturing environment. Manufacturing Engineering Teams enable the TE business unit plants to reach TE Operating Advantage (TEOA) requirements, roll out Centers of Excellence (COE), Best Demonstrated Practices (BDP's) and advise plants on tool and machine duplications / corrections / improvements. They design and develop manufacturing process and automation platforms and apply them for the realization of new product developments as well as optimization of existing products already in production. The Teams also support Product Development in the selection and optimization of tools for piece part production and the selection of the most suitable manufacturing concepts relative to planned manufacturing quantities, quality requirements and manufacturing location. They act as interface between engineering and production to ensure manufacturability of new designs and smooth production ramp up as well as support the research & development teams to produce sample manufacturing equipment, product samples and prototypes.
**What your background should look like:**
**Key Responsibilities**
+ Lead continuous improvement projects to enhance manufacturing performance
+ Support development and implementation of efficient production processes and tools
+ Collaborate with engineering quality and production teams on new product introductions
+ Analyze and resolve production issues using root cause and corrective action methods
+ Drive lean manufacturing practices including 5S and waste reduction
+ Maintain and update process documentation and standard work procedures
+ Ensure compliance with safety quality and company standards
+ Mentor and support junior engineers and production staf
**Job Requirements**
+ Bachelor degree in Mechanical Engineering Manufacturing Engineering or related field
+ Minimum five years of relevant experience in a manufacturing environment
+ Strong knowledge of lean manufacturing and problem solving tools
+ Proficient in Microsoft Office and engineering documentation
+ Excellent teamwork communication and analytical skills
+ Experience in electronics or connectivity manufacturing is an advantage
**Competencies**
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork
Location:
Prai, Penang, 07, MY, 13600
City: Prai, Penang
State: 07
Country/Region: MY
Travel: None
Requisition ID:
Alternative Locations:
Function: Engineering & Technology
TE Connectivity and its subsidiaries, affiliates, and operating units (collectively, the "Company") is committed to providing a work environment that prohibits discrimination on the basis of age, color, disability, ethnicity, marital status, national origin, race, religion, gender, gender identity, sexual orientation, protected veteran status, disability or any other characteristics protected by applicable law or regulation.

SR MANUFACTURING ENGINEER
At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.
**Job Overview**
Analyze and solve production engineering and new project qualification issues with the objective of ensureing new project launch on time and the production by order and improving the efficiency within the supervision of Sr. Manager PBL organization.
As a PBL manufacturing engineer to work with cross functions and PBL suppliers, to response for the new products' quotation and process design and sample qualification, and to support sourcing to drive productivity and on time delivery etc. train and support PBL supplier to improve their capability.
**Job Description**
**Responsibilities:**
**Supplier Engineering Capability**
(i)support Sourcing for new supplier qualification
(ii) support Sourcing for supplier exit
(iii) support SQE for supplier audit
((iV) supplier assessment, to improve supplier capability"
**New Project**
(i) support Sourcing for new product 安定quotation
(ii) as project leader (for Micro Lite project), to manage new project for on schedule approval
(iii) as manufacturing engineer, to support supplier for DFM and PFMEA etc. preparation and design review etc.
(iv) as manufacturing engineer, to support supplier for process and tool design and qualification
(v) follow up sample making issues and sample schedule which requested by customer or PDE. and work with cross function team members and supplier for improvement until approval
(vi) work with PBL suppliers for packing design and qualification test
(vii) work with supplier to get all engineering documents done
(viii) work with SQE and supplier for safe launch process audit
**Sustain Product**
(i) work with Sourcing and supplier to review and improve capacity, including/lead copied tool qualification
(ii)work with SQE and supplier to improve process yield and any quality problems
(iii)follow EC change and 4M change
(iv) follow material change (alternative), to work with team members to lead new material qualification progress
(v) follow supplier change or migration project (from TE plant to PBL supplier), to work with cross function team members and supplier to follow qualification
**Productivity**
(i) work with suppliers and team members to find the improvement opportunities, such as process, material, plating, packing etc.
(ii) follow VAVE project, work with supplier and team members to drive the project and cost reduction
(iii) support Sourcing for cost reduction negotiation.
**Capex Management and Equipment Maintenance**
(i) follow capex qualification, and work with Finance and Sourcing and PBL supplier to manage those capex well
(ii) support PBL supplier to prepare equipment and tool maintenance plan and monitor the plan conducted well by supplier"
**Requirements** :
+ Bachelor degree and mechanical related background
+ Total Working experience 8years above
+ Over 5 years direct experience in Connector and / or Cable manufacturing engineering experiences"
+ Communication skills (Mandarin and English)
+ Execution ability
**What your background should look like:**
**Competencies**
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork
Location:
BAYAN LEPAS PENANG, 07, MY, 11900
City: BAYAN LEPAS PENANG
State: 07
Country/Region: MY
Travel: 10% to 25%
Requisition ID:
Alternative Locations:
Function: Engineering & Technology
TE Connectivity and its subsidiaries, affiliates, and operating units (collectively, the "Company") is committed to providing a work environment that prohibits discrimination on the basis of age, color, disability, ethnicity, marital status, national origin, race, religion, gender, gender identity, sexual orientation, protected veteran status, disability or any other characteristics protected by applicable law or regulation.

SR MANUFACTURING ENGINEER
At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.
**Job Overview**
Analyze and solve production engineering and new project qualification issues with the objective of ensureing new project launch on time and the production by order and improving the efficiency within the supervision of Sr. Manager PBL organization.
As a PBL manufacturing engineer to work with cross functions and PBL suppliers, to response for the new products' quotation and process design and sample qualification, and to support sourcing to drive productivity and on time delivery etc. train and support PBL supplier to improve their capability.
**Job Description**
**Responsibilities** :
**Supplier Engineering Capability**
(i)support Sourcing for new supplier qulification
(ii) support Sourcing for supplier exit
(iii) support SQE for supplier audit
((iV) supplier assessment, to impove supplier capability
**New Project**
(i) support Sourcing for new product 安定quotation
(ii) as project leader (for Micro Lite proejct), to manage new project for on schedule approval
(iii) as manufacturing engineer, to support supplier for DFM and PFMEA etc. preparation and design review etc.
(iv) as manufacturing engineer, to support supplier for process and tool design and qualification
(v) follow up sample making issues and sample schedule which requested by customer or PDE. and work with cross fucntion team members and supplier for improvement until approval
(vi) work with PBL suppliers for packing design and qualification test
(vii) work with supplier to get all engineering documents done
(viii) work with SQE and supplier for safe launch process audit
**Sustain Product**
(i) work with Sourcing and supplier to review and improve capacity, including/lead copied tool qualification
(ii)work with SQE and supplier to improve process yield and any quality problems
(iii)follow EC change and 4M change
(iv) follow material change (alternative), to work with team members to lead new material qulification progress
(v) follow supplier change or migration project (from TE plant to PBL supplier), to work with cross function team members and supplier to follow qulification
**Productivity**
(i) work with suppliers and team members to find the improvement opportinities, such as process, material, plating, packing etc.
(ii) follow VAVE project, work with supplier and team members to drive the project and cost reduction
(iii) support Sourcing for cost reduction nego
**Capex Management and Equipment Maintenance**
(i) follow capex qualification, and work with Finance and Soucing and PBL supplier to manage those capex well
(ii) support PBL supplier to prepare equipment and tool maintenance plan and monitor the plan conducted well by supplier
**Requirements** :
+ Balchelor degree and mechinical related background
+ Total Working experience 8years above
+ Over 5 years Connector and / or Cable manufacturing engineering experiences
**What your background should look like:**
**Competencies**
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork
Location:
PETALING JAYA SELANGOR, 10, MY, 47301
City: PETALING JAYA SELANGOR
State: 10
Country/Region: MY
Travel: 10% to 25%
Requisition ID:
Alternative Locations:
Function: Engineering & Technology
TE Connectivity and its subsidiaries, affiliates, and operating units (collectively, the "Company") is committed to providing a work environment that prohibits discrimination on the basis of age, color, disability, ethnicity, marital status, national origin, race, religion, gender, gender identity, sexual orientation, protected veteran status, disability or any other characteristics protected by applicable law or regulation.

SR MANUFACTURING ENGINEER
At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.
**Job Overview**
Leads small and medium sized projects and manages the technical elements.
**Job Requirements**
**Job Responsibilities**
+ Lead and support process improvement projects to optimize manufacturing efficiency, reduce waste, and improve quality
+ Develop, validate, and implement manufacturing processes and tooling for new and existing products
+ Collaborate with product development, quality, and production teams on new product introduction and design for manufacturability
+ Identify root causes of production issues and implement corrective and preventive actions
+ Lead Lean Six Sigma and 5S initiatives across the production floor
+ Support capacity planning and equipment layout optimization
+ Develop and maintain process documentation, work instructions, and standard operating procedures
+ Ensure compliance with safety standards, quality systems, and regulatory requirements
+ Mentor junior engineers and provide technical guidance to the operations team
**Job Requirements**
+ Bachelor's degree in mechanical engineering, Manufacturing Engineering, or a related field
+ Minimum 5 years of experience in a manufacturing or industrial engineering role, preferably in a high-mix, low-volume environment
+ Strong knowledge of Lean Manufacturing, Six Sigma, and process optimization techniques
+ Experience with manufacturing tools such as PFMEA, control plans, SPC, and root cause analysis
+ Proficient in CAD software and Microsoft Office applications
+ Excellent analytical, problem-solving, and communication skills
+ Ability to lead cross-functional teams and manage multiple projects
+ Experience in the electronics or connectivity components industry is an advantage.
**What your background should look like**
Generally requires Bachelors degree in appropriate field with a minimum of 5 years of progressively responsible professional level experience; Masters degree or higher or local equivalent may be preferred at this level
**Competencies**
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork
Location:
Prai, Penang, 07, MY, 13600
City: Prai, Penang
State: 07
Country/Region: MY
Travel: None
Requisition ID:
Alternative Locations:
Function: Engineering & Technology
TE Connectivity and its subsidiaries, affiliates, and operating units (collectively, the "Company") is committed to providing a work environment that prohibits discrimination on the basis of age, color, disability, ethnicity, marital status, national origin, race, religion, gender, gender identity, sexual orientation, protected veteran status, disability or any other characteristics protected by applicable law or regulation.

SR MANUFACTURING ENGINEER
At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.
**Job Overview**
Leads small and medium sized projects and manages the technical elements.
**Job Requirements**
**Job Responsibilities**
+ Lead and support process improvement projects to optimize manufacturing efficiency, reduce waste, and improve quality
+ Develop, validate, and implement manufacturing processes and tooling for new and existing products
+ Collaborate with product development, quality, and production teams on new product introduction and design for manufacturability
+ Identify root causes of production issues and implement corrective and preventive actions
+ Lead Lean Six Sigma and 5S initiatives across the production floor
+ Support capacity planning and equipment layout optimization
+ Develop and maintain process documentation, work instructions, and standard operating procedures
+ Ensure compliance with safety standards, quality systems, and regulatory requirements
+ Mentor junior engineers and provide technical guidance to the operations team
**Job Requirements**
+ Bachelor's degree in mechanical engineering, Manufacturing Engineering, or a related field
+ Minimum 5 years of experience in a manufacturing or industrial engineering role, preferably in a high-mix, low-volume environment
+ Strong knowledge of Lean Manufacturing, Six Sigma, and process optimization techniques
+ Experience with manufacturing tools such as PFMEA, control plans, SPC, and root cause analysis
+ Proficient in CAD software and Microsoft Office applications
+ Excellent analytical, problem-solving, and communication skills
+ Ability to lead cross-functional teams and manage multiple projects
+ Experience in the electronics or connectivity components industry is an advantage.
**What your background should look like**
Generally requires Bachelors degree in appropriate field with a minimum of 5 years of progressively responsible professional level experience; Masters degree or higher or local equivalent may be preferred at this level
**Competencies**
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork
Location:
Prai, Penang, 07, MY, 13600
City: Prai, Penang
State: 07
Country/Region: MY
Travel: None
Requisition ID:
Alternative Locations:
Function: Engineering & Technology
TE Connectivity and its subsidiaries, affiliates, and operating units (collectively, the "Company") is committed to providing a work environment that prohibits discrimination on the basis of age, color, disability, ethnicity, marital status, national origin, race, religion, gender, gender identity, sexual orientation, protected veteran status, disability or any other characteristics protected by applicable law or regulation.

SR MANUFACTURING ENGINEER
At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.
**Job Overview**
Leads small and medium sized projects and manages the technical elements.
**Job Description**
**Job Responsibilities**
+ Lead and support process improvement projects to optimize manufacturing efficiency, reduce waste, and improve quality
+ Develop, validate, and implement manufacturing processes and tooling for new and existing products
+ Collaborate with product development, quality, and production teams on new product introduction and design for manufacturability
+ Identify root causes of production issues and implement corrective and preventive actions
+ Lead Lean Six Sigma and 5S initiatives across the production floor
+ Support capacity planning and equipment layout optimization
+ Develop and maintain process documentation, work instructions, and standard operating procedures
+ Ensure compliance with safety standards, quality systems, and regulatory requirements
+ Mentor junior engineers and provide technical guidance to the operations tea
**Job Requirements**
+ Bachelor's degree in mechanical engineering, Manufacturing Engineering, or a related field
+ Minimum 5 years of experience in a manufacturing or industrial engineering role, preferably in a high-mix, low-volume environment
+ Strong knowledge of Lean Manufacturing, Six Sigma, and process optimization techniques
+ Experience with manufacturing tools such as PFMEA, control plans, SPC, and root cause analysis
+ Proficient in CAD software and Microsoft Office applications
+ Excellent analytical, problem-solving, and communication skills
+ Ability to lead cross-functional teams and manage multiple projects
+ Experience in the electronics or connectivity components industry is an advantage
**What your background should look like**
Generally requires Bachelors degree in appropriate field with a minimum of 5 years of progressively responsible professional level experience; Masters degree or higher or local equivalent may be preferred at this level
**Competencies**
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork
Location:
Prai, Penang, 07, MY, 13600
City: Prai, Penang
State: 07
Country/Region: MY
Travel: None
Requisition ID:
Alternative Locations:
Function: Engineering & Technology
TE Connectivity and its subsidiaries, affiliates, and operating units (collectively, the "Company") is committed to providing a work environment that prohibits discrimination on the basis of age, color, disability, ethnicity, marital status, national origin, race, religion, gender, gender identity, sexual orientation, protected veteran status, disability or any other characteristics protected by applicable law or regulation.

MANUFACTURING ENGINEER II
At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.
**Job Overview**
Leads small and medium sized projects and manages the technical elements.
**Job Description**
**Job Responsibilities**
+ Lead and support process improvement projects to optimize manufacturing efficiency, reduce waste, and improve quality
+ Develop, validate, and implement manufacturing processes and tooling for new and existing products
+ Collaborate with product development, quality, and production teams on new product introduction and design for manufacturability
+ Identify root causes of production issues and implement corrective and preventive actions
+ Lead Lean Six Sigma and 5S initiatives across the production floor
+ Support capacity planning and equipment layout optimization
+ Develop and maintain process documentation, work instructions, and standard operating procedures
+ Ensure compliance with safety standards, quality systems, and regulatory requirements
+ Mentor junior engineers and provide technical guidance to the operations team
**Job Requirements**
+ Bachelor's degree in mechanical engineering, Manufacturing Engineering, or a related field
+ Minimum 5 years of experience in a manufacturing or industrial engineering role, preferably in a high-mix, low-volume environment
+ Strong knowledge of Lean Manufacturing, Six Sigma, and process optimization techniques
+ Experience with manufacturing tools such as PFMEA, control plans, SPC, and root cause analysis
+ Proficient in CAD software and Microsoft Office applications
+ Excellent analytical, problem-solving, and communication skills
+ Ability to lead cross-functional teams and manage multiple projects
+ Experience in the electronics or connectivity components industry is an advantage.
**What your background should look like**
Generally requires Bachelors degree in appropriate field with a minimum of 5 years of progressively responsible professional level experience; Masters degree or higher or local equivalent may be preferred at this level
**Competencies**
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork
Location:
Prai, Penang, 07, MY, 13600
City: Prai, Penang
State: 07
Country/Region: MY
Travel: None
Requisition ID:
Alternative Locations:
Function: Engineering & Technology
TE Connectivity and its subsidiaries, affiliates, and operating units (collectively, the "Company") is committed to providing a work environment that prohibits discrimination on the basis of age, color, disability, ethnicity, marital status, national origin, race, religion, gender, gender identity, sexual orientation, protected veteran status, disability or any other characteristics protected by applicable law or regulation.