6 Repair Assistant jobs in Malaysia

• Monitor and arrange to run the preventive maintenance job as per the schedule report by the superior.
• Perform and carry out all tasks and work that are assigned and instructed by the immediate superior and personnel above his rank.
• Fabrication of mechanical parts, such as welding or forming parts.
• Repair electrical equipment and control circuits
  
  

• Candidate must possess at least SPM
• Required language(s): English, Bahasa Malaysia
• Good communication skills
  
  

• Bonus
• Annual Salary Increment
• Medical Benefits
• Training Provided

Conduct thorough visual inspections of exterior and interior condition

Check fluid levels (engine oil, brake fluid, coolant, washer fluid)

Inspect lights, horn, wipers, air conditioning, and other basic functions

Ensure tyre pressure is correct and tyres are in good condition

Report any issues to supervisor or relevant department before delivery

Perform full interior and exterior cleaning (vacuuming, washing, polishing)

Apply protective coatings or air fresheners as per company standard

Remove stickers, tapes, or temporary protection from recond units

Ensure vehicle is showroom-ready or delivery-ready

Assist in responding to minor customer concerns (e.g. car not clean, tyre low air, faulty wiper)

Replace small parts/accessories (e.g. wiper blades, number plate frames, floor mats)

Support warranty team with vehicle pick-up/drop-off for servicing

Ensure vehicle checklist is completed before delivery

Tag and report missing accessories or documents (remote, service book, etc.)

Coordinate with sales/admin team to update delivery status

Maintain cleanliness of work area and tools used

Knowledge of basic car functions and features (especially recond models)

Physically fit and able to work under minimal supervision

Able to drive both auto and manual transmission vehicles (valid licence required)

Good attention to detail and a strong sense of responsibility

Salary match Number of applicants Skills match

To help fast track investigation, please include here any other relevant details that prompted you to report this job ad as fraudulent / misleading / discriminatory.

What can I earn as a Maintenance Assistant

Happy New Year 2023 and as an opening 2023, we have another opportunity just landed, below position:-

1) Admin/Maintenance Assistant cum Driver.
Work Location : KL Office, Malaysia

JD:-

– To provide administrative and maintenance support to KL Office.
– To maintain general office facilities, equipment and supplies.
– Assist in organizing events, ensure that the office is presentable
and well maintained at all times.
– To perform the role of driver for Country Manager for other guests
as required.

Requirements:-
– High School Certificate or Diploma preferred.
– 5-8 years of mixed experience in admin & building maintenance related roles.
– Minimum of 5 years driving experience with a valid driving licence.
– Knowledge of Computer, Microsoft Office (Word, Excel, Outlook, Power Point), intermediate level.
– Great written and verbal communication of English Language.
– Good planning & organizing skills, basic building maintenance knowledge, attention to details as well as initiative and proactive.
– Able to multi-task and meet deadlines.

Interested?, please drop us your most Updated CV , Attn: Nadiah (Recruitment Specialist).

Closing date for CV Submission : 06 Jan 2023.

Good Luck to All Applicants!

Take care and Stay safe. Always follow Safety Rules.

Join us on Linkedln for more updates and visit our website too!

Press Tab to Move to Skip to Content Link

Assistant Manager, Operations & Maintenance (Kedah)

Construction / Installations / Maintenance / Asset Management

Permanent

Full - Time

About Us

ENGI E is pillared by 4 key businesses - Renewables, Energy Solutions, Networks, Thermal & Supply. Together with our 96,000 employees, our customers, partners and stakehol ders, we are committed to accelerate the transition towards a carbon-neutral world, through reduced energy consumption and more environmentally-friendly solutions. Inspired by our purpose, we reconcile economic performance with a positive impact on people and the planet, building on our key businesses – gas, renewables, energy, services, to offer competitive solutions to our customers.

Energy is our future, save it.

Responsibilities:

• Responsible for managing the Company Regional office and for ensuring quality for the Operation&Maintenance (O&M) activities for all related Customer’s sites and associatedUtilities plant or Facilities (UPF)and their related Mechanical & Electrical (M&E) machinery equipment and associated systems in compliancewith the statutory authorities and applicable health-safety-environmental (HSE) requirements;
• Responsible as Regional office Company representative towards Customers for all related sites to monitorthe quality of the O&M team services delivered, to achieve the O&M service levels and the UPF performanceslevels and ultimately to ensure the customer satisfaction, manage customer relationship, insurepropercommunication with regular reporting to Customers and Company headquarters/Regional officefor all serviceactivitiesperformed.
• Manage the site teams upon customers’ initial site visit to ensure complete and accurate surveying of the Mechanical & Electrical (M&E) machinery equipment and associated systems of the customers’ U tilities plant or Facilities (UPF), with proper collection of the customers’ site UPF technical, legal and financial information for the M&E machinery equipment and associated systems within service scope

Prepare annual budgets and reforecasts for Regional office overall and all related sites; control actual O&M activities expenses compliance with the budgets and perform financial quarterly review, including but limited to O&M Profit & Loss (P&L).

Insure timely and quality for issuance – by all related sites - for Technical, legal, financial documentation and UPF monthly service reports (inclusive of SLA & KPI’s) for submission to the Customers sites and to the Company headquarters (HQ) - as well as the necessary reports to the relevant statutory authorities,

Review for Regional office related Customers sites the quality of the services delivered, perform SLA-KLPI gap analysis and initiate, study the feasibility of specific project in order to propose productivity, technical improvements for the UPF on customer’s sites – in liaison with ENGIE services – related to the O&M, HSE processes, contingencies & emergency plans as well as UPF performances.

Requirements:

• Bachelor’s Degree in Mechanical Engineering or equivalent
• 10 - 12 years of experience in the area of Operation & Maintenance, exposed to Mechanical & Electrical systems, instrumentation, Air conditioning-ventilation, chilledwater, thermal heater, compressed air production and distribution systems associated with supervision, control and data acquisition (SCADA) systems at diverse client/ site locations
• Excellent communication and analytical skills with the ability to work with all levels of stakeholders
• Proven ability to learn new skills and adapt to dynamic and demanding situations
• Possesses good leadership skills to lead team members

When you join ENGIE, you will have access to:

• The opportunity to have a meaningful job where you can make a difference
• A career management plan with opportunities to grow in an international environment
• Attractive and competitive package
• Dynamic and inclusive work environment
• Continuously evolve as a professional, coupled with a variety of training opportunities

Division: ESI AMEA - South East Asia - Malaysia

Legal Entity: ENGIE SERVICES MALAYSIA SDN. BHD.

Professional Experience: Skilled ( >3 experience <15 years)

Education Level: Bachelor's Degree

Press Tab to Move to Skip to Content Link

Assistant Manager, Operations & Maintenance (Kedah)

Construction / Installations / Maintenance / Asset Management

Permanent

Full - Time

About Us

ENGI E is pillared by 4 key businesses - Renewables, Energy Solutions, Networks, Thermal & Supply. Together with our 96,000 employees, our customers, partners and stakehol ders, we are committed to accelerate the transition towards a carbon-neutral world, through reduced energy consumption and more environmentally-friendly solutions. Inspired by our purpose, we reconcile economic performance with a positive impact on people and the planet, building on our key businesses – gas, renewables, energy, services, to offer competitive solutions to our customers.

Energy is our future, save it.

Responsibilities:

• Responsible for managing the Company Regional office and for ensuring quality for the Operation&Maintenance (O&M) activities for all related Customer’s sites and associatedUtilities plant or Facilities (UPF)and their related Mechanical & Electrical (M&E) machinery equipment and associated systems in compliancewith the statutory authorities and applicable health-safety-environmental (HSE) requirements;
• Responsible as Regional office Company representative towards Customers for all related sites to monitorthe quality of the O&M team services delivered, to achieve the O&M service levels and the UPF performanceslevels and ultimately to ensure the customer satisfaction, manage customer relationship, insurepropercommunication with regular reporting to Customers and Company headquarters/Regional officefor all serviceactivitiesperformed.
• Manage the site teams upon customers’ initial site visit to ensure complete and accurate surveying of the Mechanical & Electrical (M&E) machinery equipment and associated systems of the customers’ U tilities plant or Facilities (UPF), with proper collection of the customers’ site UPF technical, legal and financial information for the M&E machinery equipment and associated systems within service scope

Prepare annual budgets and reforecasts for Regional office overall and all related sites; control actual O&M activities expenses compliance with the budgets and perform financial quarterly review, including but limited to O&M Profit & Loss (P&L).

Insure timely and quality for issuance – by all related sites - for Technical, legal, financial documentation and UPF monthly service reports (inclusive of SLA & KPI’s) for submission to the Customers sites and to the Company headquarters (HQ) - as well as the necessary reports to the relevant statutory authorities,

Review for Regional office related Customers sites the quality of the services delivered, perform SLA-KLPI gap analysis and initiate, study the feasibility of specific project in order to propose productivity, technical improvements for the UPF on customer’s sites – in liaison with ENGIE services – related to the O&M, HSE processes, contingencies & emergency plans as well as UPF performances.

Requirements:

• Bachelor’s Degree in Mechanical Engineering or equivalent
• 10 - 12 years of experience in the area of Operation & Maintenance, exposed to Mechanical & Electrical systems, instrumentation, Air conditioning-ventilation, chilledwater, thermal heater, compressed air production and distribution systems associated with supervision, control and data acquisition (SCADA) systems at diverse client/ site locations
• Excellent communication and analytical skills with the ability to work with all levels of stakeholders
• Proven ability to learn new skills and adapt to dynamic and demanding situations
• Possesses good leadership skills to lead team members

When you join ENGIE, you will have access to:

• The opportunity to have a meaningful job where you can make a difference
• A career management plan with opportunities to grow in an international environment
• Attractive and competitive package
• Dynamic and inclusive work environment
• Continuously evolve as a professional, coupled with a variety of training opportunities

Division: ESI AMEA - South East Asia - Malaysia

Legal Entity: ENGIE SERVICES MALAYSIA SDN. BHD.

Professional Experience: Skilled ( >3 experience <15 years)

Education Level: Bachelor's Degree