228 Qc Supervisor jobs in Malaysia

Join to apply for the QC Piping Supervisor role at Black & Veatch

Join to apply for the QC Piping Supervisor role at Black & Veatch

Get AI-powered advice on this job and more exclusive features.

At Black & Veatch, our employee-owners go beyond the project. For over a century, we have been breaking down social, economic and geographic barriers by making life's critical resources accessible to all. Working with us, you will help provide critical expertise as we, along with our valued clients, deliver solutions that positively impact communities around the world. Our professionals are our greatest asset, and we believe nothing is more important than the health, happiness and professional growth of our employee-owners. With a focus on flexible work-life balance options, an expanding and diverse workforce, and limitless career growth opportunities, we will give you our best to help you give us your best, and together we can build a world of difference.

Req Id : 109528

Opportunity Type : Staff

Full time/Part time : Full-Time

Employment Status: Temporary

Job Summary

Implement and maintain the project quality plans and procedures. Acts as an interface between project sites, procurement inspections, corporate offices, and clients. Responsible for the management of site QC staff (if any) on assigned project Sites.

Key Responsibilities
Provide resident piping quality supervision for BV QA/QC inspection services.

Participate in daily, weekly, or monthly quality meetings.

Review all pre-fab and installation construction engineering deliverables including procedures, QA/QC documentation, inspection, witnessing and Site Acceptance Test (SAT), etc.

Provide inspection and witness services relevant to piping per agreed ITP and Witness Points, SAT, and other major milestone test on the site.

Provide inspection services relevant to piping of off-site manufacturing / fabrication facilities, off-site storage / laydown facilities, storage of imported piping and packages/crates, as required.

Verify the provision of QA/QC records and certificates relevant to piping.

Verify and compile the punch list and non-conformance reports relevant to piping.

Management Responsibilities
Individual Contributor

Preferred Qualifications

• Diploma in Mechanical Engineering
• 5 years experience in similar role
• CCGT Project Experience
• Knowledge of quality standards and practices . Knowledge of construction technology . Knowledge of EPC industry . Constructability knowledge . Reading of Erection Drawings e g
• GA's, P and ID's and Isometrics . Knowledge of National and International Codes
• and
• Standards . Knowledge of National and/or International Rules and Regulatory Requirements . Knowledge of Quality Management Systems . Knowledge of project budget process and tools . Knowledge of department budget process and tools . Knowledge of Project controls . Risk assessment/management . Administrative policies and procedures . Construction Project Management Systems . Conceptual planning ability . Knowledge of construction contracting strategies and contract administration . Ability to effectively interface with client and government officials . Communication skills . Ability to effectively manage emergency situations . Word processing and spreadsheet computer software programs . Ability to write detailed reports . Human Relations skills . Conflict Management skills . Leadership skills (team building, coaching, mentoring, change management, advising) . Multi-tasking ability (prioritize, organize, schedule work) . Problem solving skills (identify, analyze, research, evaluate, resolve) . Project management skills . Time reporting systems . Expense reporting policies and procedures
  
  

Minimum Qualifications

Experience: 3+ years as Superintendent with degree, or 5+ years without. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations.

Certifications
Certification in discipline (e.g.: American Welding Society (AWS), Certified Welding Inspector (CWI), Institute for Supply Management (ISM)) or relevant geographical equivalent certification is desired.

Work Environment/Physical Demands
Physical Demands:

• Lift and carry heavy items weighing up to 50 pounds.
• Stand, Kneel, Bend, Stoop, Move, and Walk long distances in and around confined, cluttered places, and uneven areas.
• See and hear naturally or with correction.
• Full range of motion and flexibility consistent with requirements of the job duties.
• Requires using hands to handle, control, or feel objects, tools or controls according to a set procedure.
• Requires repetitive movement.
• May require work above 5 feet in height.
• Climb and maintain balance on steel framework, stairs, ladders and scaffolds.
• Work up to a 12 hour shift doing hard physical labor in varying temperature extremes and other outside conditions.
  
  

Work Environment:

• Typical construction site environment:
• Requires working in cramped work spaces and getting into awkward positions.
• Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust, wind, snow, rain, etc.
• Requires working in extremely bright or low lighting conditions
• Includes exposure to sounds and noise levels that are distracting or uncomfortable.
• Work around hazardous equipment.
• Typical office environment.
• This position is considered a safety sensitive position.
  
  

Competencies
Collaborates

Communicates effectively

Courage

Directs work

Instills trust

Interpersonal savvy

Organizational savvy

Salary Plan
CNS: Construction Services

Job Grade
005

BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law.

By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients.

Seniority level

• Seniority level Mid-Senior level

Employment type

• Employment type Full-time

Job function

• Job function Quality Assurance

Referrals increase your chances of interviewing at Black & Veatch by 2x

Sign in to set job alerts for “Quality Control Supervisor” roles.

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Join to apply for the QC Electrical Supervisor role at Black & Veatch

3 days ago Be among the first 25 applicants

Join to apply for the QC Electrical Supervisor role at Black & Veatch

At Black & Veatch, our employee-owners go beyond the project. For over a century, we have been breaking down social, economic and geographic barriers by making life's critical resources accessible to all. Working with us, you will help provide critical expertise as we, along with our valued clients, deliver solutions that positively impact communities around the world. Our professionals are our greatest asset, and we believe nothing is more important than the health, happiness and professional growth of our employee-owners. With a focus on flexible work-life balance options, an expanding and diverse workforce, and limitless career growth opportunities, we will give you our best to help you give us your best, and together we can build a world of difference.

Req Id : 109530

Opportunity Type : Staff

Full time/Part time : Full-Time

Employment Status: Temporary

Job Summary

Implement and maintain the project quality plans and procedures. Acts as an interface between project sites, procurement inspections, corporate offices, and clients. Responsible for the management of site QC staff (if any) on assigned project Sites.

Key Responsibilities
Provide resident Electrical quality supervision for BV QA/QC inspection services.

Participate in daily, weekly, or monthly quality meetings.

Review all pre-fab and installation construction engineering deliverables including procedures, QA/QC documentation, inspection, witnessing and Site Acceptance Test (SAT), etc.

Provide inspection and witness services relevant to Electrical per agreed ITP and Witness Points, SAT, and other major milestone test on the site.

Provide inspection services relevant to Electrical of off-site manufacturing / fabrication facilities, off-sitestorage / laydown facilities, storage of imported equipment and packages/crates, as required.

Verify the provision of QA/QC records and certificates relevant to Electrical.

Verify and compile the punch list and non-conformance reports relevant to Electrical.

Management Responsibilities
Individual Contributor

Preferred Qualifications

• Diploma in Electrical Engineering
• 5 years experience in similar role
• CCGT Project Experience
• Knowledge of quality standards and practices . Knowledge of construction technology . Knowledge of EPC industry . Constructability knowledge . Reading of Erection Drawings e g
• GA's, P and ID's and Isometrics . Knowledge of National and International Codes
• and
• Standards . Knowledge of National and/or International Rules and Regulatory Requirements . Knowledge of Quality Management Systems . Knowledge of project budget process and tools . Knowledge of department budget process and tools . Knowledge of Project controls . Risk assessment/management . Administrative policies and procedures . Construction Project Management Systems . Conceptual planning ability . Knowledge of construction contracting strategies and contract administration . Ability to effectively interface with client and government officials . Communication skills . Ability to effectively manage emergency situations . Word processing and spreadsheet computer software programs . Ability to write detailed reports . Human Relations skills . Conflict Management skills . Leadership skills (team building, coaching, mentoring, change management, advising) . Multi-tasking ability (prioritize, organize, schedule work) . Problem solving skills (identify, analyze, research, evaluate, resolve) . Project management skills . Time reporting systems . Expense reporting policies and procedures
  
  

Minimum Qualifications

Experience: 3+ years as Superintendent with degree, or 5+ years without. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations.

Certifications
Certification in discipline (e.g.: American Welding Society (AWS), Certified Welding Inspector (CWI), Institute for Supply Management (ISM)) or relevant geographical equivalent certification is desired.

Work Environment/Physical Demands
Physical Demands:

• Lift and carry heavy items weighing up to 50 pounds.
• Stand, Kneel, Bend, Stoop, Move, and Walk long distances in and around confined, cluttered places, and uneven areas.
• See and hear naturally or with correction.
• Full range of motion and flexibility consistent with requirements of the job duties.
• Requires using hands to handle, control, or feel objects, tools or controls according to a set procedure.
• Requires repetitive movement.
• May require work above 5 feet in height.
• Climb and maintain balance on steel framework, stairs, ladders and scaffolds.
• Work up to a 12 hour shift doing hard physical labor in varying temperature extremes and other outside conditions.
  
  

Work Environment:

• Typical construction site environment:
• Requires working in cramped work spaces and getting into awkward positions.
• Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust, wind, snow, rain, etc.
• Requires working in extremely bright or low lighting conditions
• Includes exposure to sounds and noise levels that are distracting or uncomfortable.
• Work around hazardous equipment.
• Typical office environment.
• This position is considered a safety sensitive position.
  
  

Competencies
Collaborates

Communicates effectively

Courage

Directs work

Instills trust

Interpersonal savvy

Organizational savvy

Salary Plan
CNS: Construction Services

Job Grade
005

BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law.

By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients.

Seniority level

• Seniority level Mid-Senior level

Employment type

• Employment type Full-time

Job function

• Job function Quality Assurance

Referrals increase your chances of interviewing at Black & Veatch by 2x

Sign in to set job alerts for “Quality Control Supervisor” roles.

Miri, Sarawak, Malaysia MYR4,500.00-MYR6,000.00 5 days ago

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Join to apply for the

QC Electrical Supervisor

role at

Black & Veatch 3 days ago Be among the first 25 applicants Join to apply for the

QC Electrical Supervisor

role at

Black & Veatch At Black & Veatch, our employee-owners go beyond the project. For over a century, we have been breaking down social, economic and geographic barriers by making life's critical resources accessible to all. Working with us, you will help provide critical expertise as we, along with our valued clients, deliver solutions that positively impact communities around the world. Our professionals are our greatest asset, and we believe nothing is more important than the health, happiness and professional growth of our employee-owners. With a focus on flexible work-life balance options, an expanding and diverse workforce, and limitless career growth opportunities, we will give you our best to help you give us your best, and together we can build a world of difference.

Req Id :

109530

Opportunity Type

:

Staff

Full time/Part time :

Full-Time

Employment Status:

Temporary

Job Summary

Implement and maintain the project quality plans and procedures. Acts as an interface between project sites, procurement inspections, corporate offices, and clients. Responsible for the management of site QC staff (if any) on assigned project Sites.

Key Responsibilities Provide resident Electrical quality supervision for BV QA/QC inspection services.

Participate in daily, weekly, or monthly quality meetings.

Review all pre-fab and installation construction engineering deliverables including procedures, QA/QC documentation, inspection, witnessing and Site Acceptance Test (SAT), etc.

Provide inspection and witness services relevant to Electrical per agreed ITP and Witness Points, SAT, and other major milestone test on the site.

Provide inspection services relevant to Electrical of off-site manufacturing / fabrication facilities, off-sitestorage / laydown facilities, storage of imported equipment and packages/crates, as required.

Verify the provision of QA/QC records and certificates relevant to Electrical.

Verify and compile the punch list and non-conformance reports relevant to Electrical.

Management Responsibilities Individual Contributor

Preferred Qualifications

Diploma in Electrical Engineering 5 years experience in similar role CCGT Project Experience Knowledge of quality standards and practices . Knowledge of construction technology . Knowledge of EPC industry . Constructability knowledge . Reading of Erection Drawings e g GA's, P and ID's and Isometrics . Knowledge of National and International Codes and Standards . Knowledge of National and/or International Rules and Regulatory Requirements . Knowledge of Quality Management Systems . Knowledge of project budget process and tools . Knowledge of department budget process and tools . Knowledge of Project controls . Risk assessment/management . Administrative policies and procedures . Construction Project Management Systems . Conceptual planning ability . Knowledge of construction contracting strategies and contract administration . Ability to effectively interface with client and government officials . Communication skills . Ability to effectively manage emergency situations . Word processing and spreadsheet computer software programs . Ability to write detailed reports . Human Relations skills . Conflict Management skills . Leadership skills (team building, coaching, mentoring, change management, advising) . Multi-tasking ability (prioritize, organize, schedule work) . Problem solving skills (identify, analyze, research, evaluate, resolve) . Project management skills . Time reporting systems . Expense reporting policies and procedures

Minimum Qualifications

Experience: 3+ years as Superintendent with degree, or 5+ years without. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations.

Certifications Certification in discipline (e.g.: American Welding Society (AWS), Certified Welding Inspector (CWI), Institute for Supply Management (ISM)) or relevant geographical equivalent certification is desired.

Work Environment/Physical Demands Physical Demands:

Lift and carry heavy items weighing up to 50 pounds. Stand, Kneel, Bend, Stoop, Move, and Walk long distances in and around confined, cluttered places, and uneven areas. See and hear naturally or with correction. Full range of motion and flexibility consistent with requirements of the job duties. Requires using hands to handle, control, or feel objects, tools or controls according to a set procedure. Requires repetitive movement. May require work above 5 feet in height. Climb and maintain balance on steel framework, stairs, ladders and scaffolds. Work up to a 12 hour shift doing hard physical labor in varying temperature extremes and other outside conditions.

Work Environment:

Typical construction site environment: Requires working in cramped work spaces and getting into awkward positions. Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust, wind, snow, rain, etc. Requires working in extremely bright or low lighting conditions Includes exposure to sounds and noise levels that are distracting or uncomfortable. Work around hazardous equipment. Typical office environment. This position is considered a safety sensitive position.

Competencies Collaborates

Communicates effectively

Courage

Directs work

Instills trust

Interpersonal savvy

Organizational savvy

Salary Plan CNS: Construction Services

Job Grade 005

BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law.

By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients. Seniority level

Seniority level Mid-Senior level Employment type

Employment type Full-time Job function

Job function Quality Assurance Referrals increase your chances of interviewing at Black & Veatch by 2x Sign in to set job alerts for “Quality Control Supervisor” roles.

Miri, Sarawak, Malaysia MYR4,500.00-MYR6,000.00 5 days ago We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Join to apply for the

QC Piping Supervisor

role at

Black & Veatch Join to apply for the

QC Piping Supervisor

role at

Black & Veatch Get AI-powered advice on this job and more exclusive features. At Black & Veatch, our employee-owners go beyond the project. For over a century, we have been breaking down social, economic and geographic barriers by making life's critical resources accessible to all. Working with us, you will help provide critical expertise as we, along with our valued clients, deliver solutions that positively impact communities around the world. Our professionals are our greatest asset, and we believe nothing is more important than the health, happiness and professional growth of our employee-owners. With a focus on flexible work-life balance options, an expanding and diverse workforce, and limitless career growth opportunities, we will give you our best to help you give us your best, and together we can build a world of difference.

Req Id :

109528

Opportunity Type

:

Staff

Full time/Part time :

Full-Time

Employment Status:

Temporary

Job Summary

Implement and maintain the project quality plans and procedures. Acts as an interface between project sites, procurement inspections, corporate offices, and clients. Responsible for the management of site QC staff (if any) on assigned project Sites.

Key Responsibilities Provide resident piping quality supervision for BV QA/QC inspection services.

Participate in daily, weekly, or monthly quality meetings.

Review all pre-fab and installation construction engineering deliverables including procedures, QA/QC documentation, inspection, witnessing and Site Acceptance Test (SAT), etc.

Provide inspection and witness services relevant to piping per agreed ITP and Witness Points, SAT, and other major milestone test on the site.

Provide inspection services relevant to piping of off-site manufacturing / fabrication facilities, off-site storage / laydown facilities, storage of imported piping and packages/crates, as required.

Verify the provision of QA/QC records and certificates relevant to piping.

Verify and compile the punch list and non-conformance reports relevant to piping.

Management Responsibilities Individual Contributor

Preferred Qualifications

Diploma in Mechanical Engineering 5 years experience in similar role CCGT Project Experience Knowledge of quality standards and practices . Knowledge of construction technology . Knowledge of EPC industry . Constructability knowledge . Reading of Erection Drawings e g GA's, P and ID's and Isometrics . Knowledge of National and International Codes and Standards . Knowledge of National and/or International Rules and Regulatory Requirements . Knowledge of Quality Management Systems . Knowledge of project budget process and tools . Knowledge of department budget process and tools . Knowledge of Project controls . Risk assessment/management . Administrative policies and procedures . Construction Project Management Systems . Conceptual planning ability . Knowledge of construction contracting strategies and contract administration . Ability to effectively interface with client and government officials . Communication skills . Ability to effectively manage emergency situations . Word processing and spreadsheet computer software programs . Ability to write detailed reports . Human Relations skills . Conflict Management skills . Leadership skills (team building, coaching, mentoring, change management, advising) . Multi-tasking ability (prioritize, organize, schedule work) . Problem solving skills (identify, analyze, research, evaluate, resolve) . Project management skills . Time reporting systems . Expense reporting policies and procedures

Minimum Qualifications

Experience: 3+ years as Superintendent with degree, or 5+ years without. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations.

Certifications Certification in discipline (e.g.: American Welding Society (AWS), Certified Welding Inspector (CWI), Institute for Supply Management (ISM)) or relevant geographical equivalent certification is desired.

Work Environment/Physical Demands Physical Demands:

Lift and carry heavy items weighing up to 50 pounds. Stand, Kneel, Bend, Stoop, Move, and Walk long distances in and around confined, cluttered places, and uneven areas. See and hear naturally or with correction. Full range of motion and flexibility consistent with requirements of the job duties. Requires using hands to handle, control, or feel objects, tools or controls according to a set procedure. Requires repetitive movement. May require work above 5 feet in height. Climb and maintain balance on steel framework, stairs, ladders and scaffolds. Work up to a 12 hour shift doing hard physical labor in varying temperature extremes and other outside conditions.

Work Environment:

Typical construction site environment: Requires working in cramped work spaces and getting into awkward positions. Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust, wind, snow, rain, etc. Requires working in extremely bright or low lighting conditions Includes exposure to sounds and noise levels that are distracting or uncomfortable. Work around hazardous equipment. Typical office environment. This position is considered a safety sensitive position.

Competencies Collaborates

Communicates effectively

Courage

Directs work

Instills trust

Interpersonal savvy

Organizational savvy

Salary Plan CNS: Construction Services

Job Grade 005

BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law.

By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients. Seniority level

Seniority level Mid-Senior level Employment type

Employment type Full-time Job function

Job function Quality Assurance Referrals increase your chances of interviewing at Black & Veatch by 2x Sign in to set job alerts for “Quality Control Supervisor” roles.

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Join to apply for the QC Mechanical Supervisor (Equipment) role at Black & Veatch

5 days ago Be among the first 25 applicants

Join to apply for the QC Mechanical Supervisor (Equipment) role at Black & Veatch

At Black & Veatch, our employee-owners go beyond the project. For over a century, we have been breaking down social, economic and geographic barriers by making life's critical resources accessible to all. Working with us, you will help provide critical expertise as we, along with our valued clients, deliver solutions that positively impact communities around the world. Our professionals are our greatest asset, and we believe nothing is more important than the health, happiness and professional growth of our employee-owners. With a focus on flexible work-life balance options, an expanding and diverse workforce, and limitless career growth opportunities, we will give you our best to help you give us your best, and together we can build a world of difference.

Req Id : 109418

Opportunity Type : Staff

Full time/Part time : Full-Time

Employment Status: Temporary

Job Summary

Implement and maintain the project quality plans and procedures. Acts as an interface between project sites, procurement inspections, corporate offices, and clients. Responsible for the management of site QC staff (if any) on assigned project Sites.

Key Responsibilities
Provide resident Mechanical quality supervision for BV QA/QC inspection services.

Participate in daily, weekly, or monthly quality meetings.

Review all pre-fab and installation construction engineering deliverables including procedures, QA/QC documentation, inspection, witnessing and Site Acceptance Test (SAT), etc.

Provide inspection and witness services relevant to mechanical equipment per agreed ITP and Witness Points, SAT, and other major milestone test on the site.

Provide inspection services relevant to mechanical equipment of off-site manufacturing / fabrication facilities, off-site storage / laydown facilities, storage of imported equipment and packages/crates, as required.

Verify the provision of QA/QC records and certificates relevant to mechanical equipment.

Verify and compile the punch list and non-conformance reports relevant to mechanical equipment.

Management Responsibilities
Individual Contributor

Preferred Qualifications

• Diploma in Mechanical Engineering
• 5 years experience in similar role
• CCGT project Experience
• Knowledge of quality standards and practices . Knowledge of construction technology . Knowledge of EPC industry . Constructability knowledge . Reading of Erection Drawings e g
• GA's, P and ID's and Isometrics . Knowledge of National and International Codes
• and
• Standards . Knowledge of National and/or International Rules and Regulatory Requirements . Knowledge of Quality Management Systems . Knowledge of project budget process and tools . Knowledge of department budget process and tools . Knowledge of Project controls . Risk assessment/management . Administrative policies and procedures . Construction Project Management Systems . Conceptual planning ability . Knowledge of construction contracting strategies and contract administration . Ability to effectively interface with client and government officials . Communication skills . Ability to effectively manage emergency situations . Word processing and spreadsheet computer software programs . Ability to write detailed reports . Human Relations skills . Conflict Management skills . Leadership skills (team building, coaching, mentoring, change management, advising) . Multi-tasking ability (prioritize, organize, schedule work) . Problem solving skills (identify, analyze, research, evaluate, resolve) . Project management skills . Time reporting systems . Expense reporting policies and procedures
  
  

Minimum Qualifications

Experience: 3+ years as Superintendent with degree, or 5+ years without. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations.

Certifications
Certification in discipline (e.g.: American Welding Society (AWS), Certified Welding Inspector (CWI), Institute for Supply Management (ISM)) or relevant geographical equivalent certification is desired.

Work Environment/Physical Demands
Physical Demands:

• Lift and carry heavy items weighing up to 50 pounds.
• Stand, Kneel, Bend, Stoop, Move, and Walk long distances in and around confined, cluttered places, and uneven areas.
• See and hear naturally or with correction.
• Full range of motion and flexibility consistent with requirements of the job duties.
• Requires using hands to handle, control, or feel objects, tools or controls according to a set procedure.
• Requires repetitive movement.
• May require work above 5 feet in height.
• Climb and maintain balance on steel framework, stairs, ladders and scaffolds.
• Work up to a 12 hour shift doing hard physical labor in varying temperature extremes and other outside conditions.
  
  

Work Environment:

• Typical construction site environment:
• Requires working in cramped work spaces and getting into awkward positions.
• Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust, wind, snow, rain, etc.
• Requires working in extremely bright or low lighting conditions
• Includes exposure to sounds and noise levels that are distracting or uncomfortable.
• Work around hazardous equipment.
• Typical office environment.
• This position is considered a safety sensitive position.
  
  

Competencies
Collaborates

Communicates effectively

Courage

Directs work

Instills trust

Interpersonal savvy

Organizational savvy

Salary Plan
CNS: Construction Services

Job Grade
005

BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law.

By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients.

Seniority level

• Seniority level Mid-Senior level

Employment type

• Employment type Full-time

Job function

• Job function Quality Assurance

Referrals increase your chances of interviewing at Black & Veatch by 2x

Sign in to set job alerts for “Quality Control Supervisor” roles.

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Join to apply for the

QC Mechanical Supervisor (Equipment)

role at

Black & Veatch 5 days ago Be among the first 25 applicants Join to apply for the

QC Mechanical Supervisor (Equipment)

role at

Black & Veatch At Black & Veatch, our employee-owners go beyond the project. For over a century, we have been breaking down social, economic and geographic barriers by making life's critical resources accessible to all. Working with us, you will help provide critical expertise as we, along with our valued clients, deliver solutions that positively impact communities around the world. Our professionals are our greatest asset, and we believe nothing is more important than the health, happiness and professional growth of our employee-owners. With a focus on flexible work-life balance options, an expanding and diverse workforce, and limitless career growth opportunities, we will give you our best to help you give us your best, and together we can build a world of difference.

Req Id :

109418

Opportunity Type

:

Staff

Full time/Part time :

Full-Time

Employment Status:

Temporary

Job Summary

Implement and maintain the project quality plans and procedures. Acts as an interface between project sites, procurement inspections, corporate offices, and clients. Responsible for the management of site QC staff (if any) on assigned project Sites.

Key Responsibilities Provide resident Mechanical quality supervision for BV QA/QC inspection services.

Participate in daily, weekly, or monthly quality meetings.

Review all pre-fab and installation construction engineering deliverables including procedures, QA/QC documentation, inspection, witnessing and Site Acceptance Test (SAT), etc.

Provide inspection and witness services relevant to mechanical equipment per agreed ITP and Witness Points, SAT, and other major milestone test on the site.

Provide inspection services relevant to mechanical equipment of off-site manufacturing / fabrication facilities, off-site storage / laydown facilities, storage of imported equipment and packages/crates, as required.

Verify the provision of QA/QC records and certificates relevant to mechanical equipment.

Verify and compile the punch list and non-conformance reports relevant to mechanical equipment.

Management Responsibilities Individual Contributor

Preferred Qualifications

Diploma in Mechanical Engineering 5 years experience in similar role CCGT project Experience Knowledge of quality standards and practices . Knowledge of construction technology . Knowledge of EPC industry . Constructability knowledge . Reading of Erection Drawings e g GA's, P and ID's and Isometrics . Knowledge of National and International Codes and Standards . Knowledge of National and/or International Rules and Regulatory Requirements . Knowledge of Quality Management Systems . Knowledge of project budget process and tools . Knowledge of department budget process and tools . Knowledge of Project controls . Risk assessment/management . Administrative policies and procedures . Construction Project Management Systems . Conceptual planning ability . Knowledge of construction contracting strategies and contract administration . Ability to effectively interface with client and government officials . Communication skills . Ability to effectively manage emergency situations . Word processing and spreadsheet computer software programs . Ability to write detailed reports . Human Relations skills . Conflict Management skills . Leadership skills (team building, coaching, mentoring, change management, advising) . Multi-tasking ability (prioritize, organize, schedule work) . Problem solving skills (identify, analyze, research, evaluate, resolve) . Project management skills . Time reporting systems . Expense reporting policies and procedures

Minimum Qualifications

Experience: 3+ years as Superintendent with degree, or 5+ years without. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations.

Certifications Certification in discipline (e.g.: American Welding Society (AWS), Certified Welding Inspector (CWI), Institute for Supply Management (ISM)) or relevant geographical equivalent certification is desired.

Work Environment/Physical Demands Physical Demands:

Lift and carry heavy items weighing up to 50 pounds. Stand, Kneel, Bend, Stoop, Move, and Walk long distances in and around confined, cluttered places, and uneven areas. See and hear naturally or with correction. Full range of motion and flexibility consistent with requirements of the job duties. Requires using hands to handle, control, or feel objects, tools or controls according to a set procedure. Requires repetitive movement. May require work above 5 feet in height. Climb and maintain balance on steel framework, stairs, ladders and scaffolds. Work up to a 12 hour shift doing hard physical labor in varying temperature extremes and other outside conditions.

Work Environment:

Typical construction site environment: Requires working in cramped work spaces and getting into awkward positions. Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust, wind, snow, rain, etc. Requires working in extremely bright or low lighting conditions Includes exposure to sounds and noise levels that are distracting or uncomfortable. Work around hazardous equipment. Typical office environment. This position is considered a safety sensitive position.

Competencies Collaborates

Communicates effectively

Courage

Directs work

Instills trust

Interpersonal savvy

Organizational savvy

Salary Plan CNS: Construction Services

Job Grade 005

BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law.

By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients. Seniority level

Seniority level Mid-Senior level Employment type

Employment type Full-time Job function

Job function Quality Assurance Referrals increase your chances of interviewing at Black & Veatch by 2x Sign in to set job alerts for “Quality Control Supervisor” roles.

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

About this position

Objective of this role:

Commitment to the quality and integrity of Mazars global audit methodology and thorough quality control that applied to every client engagement. This role focuses on quality control and carries out EQCR to ensure professional standards compliance in our reports.

Main Tasks:

• Stay current on industry development related to engagement standards that impact out business.
• Be and active participant in engagement standard setter activities, which may include conference attendance, task force participation, professional response to comment letters, etc.
• Develop strategies and materials to implement both new and changed standards efficiently.
• Develop policies and procedures related to the Firm’s system of quality control as required under the MIA and Mazars QC Manual.
• Implement details policies and procedures that support compliance with professional standards (MIA, AOB, PCAOB, IESBA, IFRS etc.)
• Continuously consult with Firm personnel regarding compliance with professional standards matters.
• Draft thought leadership material to support both internally and externally focused campaigns.
• Monitor Firm compliance with the MIA Quality Control Standards and engagement standards.
• Manage the Firm’s annual internal inspection process, which addresses both Firm level policy compliance, and audit and attest engagement standards.
• Manage the Firm’s global reporting requirements to Mazars Group.
• Perform Engagement Quality Control reviews on professional standards issues.
• Maintain and update the Firm’s Quality Control Manuals.
• Participate in both regulatory and global control inspections.
• Ability to perform well under pressure, and deliver quality client services with accuracy and in a timely manner.

Education:

• Minimum Degree in Finance / Accounting or any relevant field
• Qualified accountant – MIA/ACCA/CPA Australia, or equivalent.

Working Experience:

• 5-8 years of relevant experiences.
• Demonstrated success in adapting a work environment of about 120 professional.

Technical & Professional Knowledge / Membership :

• Member in any relevant professional bodies
• Holds significant external audit experience managing a portfolio of clients and leading audit teams and a good technical expertise
• Knowledge of the MIA Quality Control, Ethics and Independence Standards.
• A demonstrated commitment to excellence in compliance with engagement standards.
• Ability to perform technical consultations and reviews.
• Ability to research and document complex accounting and engagement standards issues.
• Ability to translate high-level technical literature into commonly understood language and usable data.
• People management experience. Excellent communication and people management / development skills, team-player.
• Functional knowledge and skills in using Microsoft applications, i.e. Word, Excel, PowerPoint.
• Excellent written and oral presentation skills required.

For further information, and to apply, please visit our website via the “Apply” button below.

Candidates must be resident in Malaysia, or have the right to work in Malaysia.

#J-18808-Ljbffr

As a Senior Quality Management Executive, you will leverage your experience and expertise to work on key initiatives related to quality management, regulatory compliance, technology transformation and firm-wide monitoring processes.

Our collaborative environment provides the perfect platform for you to refine your skills, optimise processes and contribute to the continuous improvement of engagement monitoring.

Job Responsibilities:

• Support the firm’s technology and transformation initiatives, ensuring effective coordination and execution.
• Evaluate and enhance quality management processes for compliance with internal and regulatory requirements.
• Assist in the design, implementation, and operation of the firm’s monitoring and remediation processes.
• Support the firm in regulatory inspections, including data collection and documentation.
• Compile, maintain, and update the firm’s operational documentation on a timely basis.

Job Requirements:

• Bachelor's degree in Accounting, Finance, Business Administration, Management, Data Analytics, or a related field.
• Minimum 2–4 years of relevant experience in internal or external audit, risk management, quality control, or a related area.
• Excellent command of the English language with the ability to draft internal compliance reports, policies, and action plans clearly and concisely; experience in copywriting is an added advantage.
• Knowledge in ISQM 1, ISQM 2, and PCAOB’s QC 1000 is an added advantage.
• Excellent analytical, problem-solving, and communication skills.
• Ability to work independently and collaborate effectively with various stakeholders.
• Proficiency in Microsoft Office (Excel, Word, PowerPoint) and familiarity with audit-related software and data analytics is an added advantage.

#J-18808-Ljbffr

Develop and implement strategies, approaches, concepts, methodologies, and programs to establish and maintain quality standards for existing and future technologies, packages, products, and services. This includes providing proactive and reactive quality services internally.

Job Description

In this role, you will:

1. Act as the IFX quality ambassador.
2. Influence the quality culture and mindset of subcontractors to align with IFX's standards.
3. Train subcontractors in IFX quality management practices and oversee implementation.
4. Coordinate internal and external resources to enable subcontractors' quality management processes and establish process capabilities for developing and manufacturing automotive-grade products.
5. Collaborate closely with development and engineering teams to develop automotive-grade products through the APQP process.
6. Participate in project milestone assessments and releases.
7. Conduct production readiness assessments, identify weaknesses, and drive improvements.
8. Support development of 8D problem-solving reports.
9. Maintain automotive-grade product quality through production control processes such as IQC, IPQC, OQC, and reliability assessments.
10. Manage change processes, review evaluations/assessments, approve, and implement changes.
11. Oversee subcontractors' daily quality operations, monitor and report quality performance to OSAT, division, and customers, and resolve quality issues.
12. Coordinate audits with IFX and/or customers, lead audit activities, and follow up on closures and improvements (including VDA 6.3 audits, development projects, and safe launch/ramp-up audits).

Your Profile

You are well-suited for this role if you have:

• A bachelor's degree and substantial experience in semiconductor assembly or related industries such as EMS, with good knowledge of semiconductor assembly materials and passive components.
• Experience in engineering, production, and/or quality management, particularly in automotive semiconductors or automotive electronics.
• High independence, self-motivation, a passion for excellence, and the ability to work under pressure.
• Strong problem-solving skills, logical thinking, and high analytical capability.
• Excellent communication skills, with the ability to influence peers and partners.
• Team-oriented attitude, capable of collaborating with both external customers and internal teams.

#WeAreIn to drive decarbonization and digitalization. As a global leader in semiconductor solutions for power systems and IoT, Infineon enables innovative solutions for green energy, clean mobility, and smart IoT. We foster innovation, customer success, and a supportive environment that respects diversity and inclusion. Join us in making life easier, safer, and greener.

Are you in?

We are committed to creating the best Infineon for everyone, embracing diversity and providing equal opportunities. Our environment is built on trust, openness, respect, and tolerance. Please inform your recruiter about any specific needs to facilitate your participation in the interview process.

#J-18808-Ljbffr