56 Medical Lab jobs in Malaysia

Overview of Position Vascular technologists are a highly specialized group of allied health professionals who perform non-invasive studies using ultrasound and blood pressure measurements to assess for vascular diseases or disorders. They are important members of the vascular and surgical team; they assist physicians in the planning and management of a patient’s treatment. Local vascular technologists are trained on-the-job. They typically work with a high level of independence as they are required to compile information gathered from a series of vascular related examinations to give a preliminary impression for the physicians. In order to do this, vascular technologists are required to have adequate training in vascular scanning techniques, physiological testing as well as have an in-depth knowledge about vascular disease. A minimum of two years training is required for a vascular technologist trainee to be competent in all aspects of vascular testing. A professional certification awarded by American Registry for Diagnostic Medical Sonography (ARDMS) as a Registered Vascular Technologist (RVT) is required at the end of training. Vascular technologists work in a fast-paced and physically demanding environment. Vascular studies typically take between 30 minutes to as long as 2-3 hours depending on the number of scans ordered. Responsibilities Finger/ankle/toe-brachial pressure index studies for evaluation of peripheral arterial diseases. In relatively fit patients, exercise ankle-brachial index can be performed to determine the severity of claudication in the lower limb (pain in lower limb muscles as a result of impaired blood flow) when they are on the move. Arterial studies for lower and upper extremities for evaluation of peripheral arterial disease. For patients who present with intermittent claudication, ulcers/gangrene in the extremities etc. Carotid (neck) arteries for blockages. Screening and surveillance of abdominal aorta, iliac and visceral (renal, mesenteric and celiac etc) arteries for disorders like aneurysm (abnormally large arteries), dissection (tear in the wall of the artery), blockages in the arteries, follow-up for post stent insertion or bypass surgery. Pre-operative scan for arterio-venous fistula creation (for dialysis) to determine the patency and lumen diameters of blood vessels in the upper or lower limbs. Surveillance study of arterio-venous fistula or graft when difficulties are encountered during dialysis eg. Increase arterial or venous pressures, difficulties in needling etc. Venous studies of the upper and lower limbs for deep vein thrombosis (blood clot). Varicose veins/venous reflux studies for chronic venous insufficiency, varicose veins, spider veins etc. Pre-cardiac or vascular surgery screening/assessment to determine lumen diameters of conduits for harvest. They include great saphenous veins, radial arteries and internal mammary arteries. Specialised vascular studies for compression syndrome like thoracic outlet syndrome for the upper limb, May-Thurner syndrome (compression of left iliac vein), nutcracker syndrome (compression of left renal vein), median arcuate ligament syndrome (compression of celiac artery) etc. Transcutaneous oxygen pressure (TCPO2) studies to detect viable tissue in the extremities to determine healing of wound or determine optimum amputation level. Intra-operative scanning of vessels for difficult cases. Requirements Degree in Biomedical Sciences/Medical Technology/Nursing/Biotechnology /Life Sciences. Candidates with Degree in other majors are also welcome to apply. Candidates should have at least a Pass in A Levels Biology and O Levels Physics. Candidates with relevant work experience in ultrasound/vascular ultrasound would be an added advantage. Candidates without ultrasound experience are also welcome to apply. A two years on-the-job training will be provided. Possess a positive, a can-do and proactive working attitude, with initiative and flexibility. Self-driven individual willing to learn a new skill. Meticulous, with good organization skills, strong communication and interpersonal skills

#J-18808-Ljbffr

Overview*

The Medical Laboratory Technologist is responsible for performing product manufacturing and interpreting product quality assurance testing results in the department. He/She is also responsible to undertake related laboratory activities in order to ensure smooth operation and provide quality laboratory services to our customers, both internal and external.

Job Responsibilities*

Primary Responsibilities and Duties (80%)

General

• Participate in the reception of cellular products and rejection of those that are unsuitable for further processing.
• Perform all procedures in accordance with laboratory protocols.
• Ensure that unsatisfactory values are reported to appropriate personnel
• Resolve queries from customers.
• Report procedure deviations and adverse incidents to the supervisor.
• Perform, record and interpret results of internal and external quality assurance procedures and take corrective action where indicated.
• Undertake simple preventative maintenance of laboratory instrumentation and perform simple troubleshooting in the event of malfunction.
• Comply with laboratory inventory management procedures. Notify appropriate laboratory personnel when test kits, reagents or other supplies should be re-ordered.
• Comply with good laboratory practice as set out by the International Laboratory Accreditation Program and Singapore regulatory agencies such as the Medical Audit & Accreditation Unit.
• Comply with all requirements of the Institutional as well as Departmental Safety Manual.
• Comply with Institutional IT Security and Data Governance
• Comply with Institutional and National PDPA Regulation
• Keep current with new instrumentation, techniques and procedures by attending/participating in appropriate workshops, seminars and in-service education classes.
• Assist with the conduct of in-service education and continuing education classes.
• Assist with coaching of trainees and new staff in laboratory procedures.
• Guide Laboratory Technicians, Clerical staff and Health Attendants in their work when required.
• Perform shift duties as required.
• Promptly carry out the instruction(s) of senior staff with regard to work procedures and duties.

Secondary Duties and Responsibilities (20%)

• Undertake back-up procedures in the event of emergencies such as loss of electrical power and information system crash.
• Participate and contribute to project teams as required.
• Participate in laboratory administrative work such as filing, processing of deliveries orders and invoices.
• Evaluate new laboratory test methodologies and instrumentation.
• Any other duties as assigned by supervisor.

Requirements*

• BSc in Medical Laboratory Science or equivalent
• Good laboratory skills.
• Above average dexterity with good general health and no colour blindness.
• Basic computer literacy.
• Good planning and organizational skills
• Good communication and interpersonal skills. Service orientated and customer focused.

#J-18808-Ljbffr

Overview* The Medical Laboratory Technologist is responsible for performing product manufacturing and interpreting product quality assurance testing results in the department. He/She is also responsible to undertake related laboratory activities in order to ensure smooth operation and provide quality laboratory services to our customers, both internal and external. Job Responsibilities* Primary Responsibilities and Duties (80%) General Participate in the reception of cellular products and rejection of those that are unsuitable for further processing. Perform all procedures in accordance with laboratory protocols. Ensure that unsatisfactory values are reported to appropriate personnel Resolve queries from customers. Report procedure deviations and adverse incidents to the supervisor. Perform, record and interpret results of internal and external quality assurance procedures and take corrective action where indicated. Undertake simple preventative maintenance of laboratory instrumentation and perform simple troubleshooting in the event of malfunction. Comply with laboratory inventory management procedures. Notify appropriate laboratory personnel when test kits, reagents or other supplies should be re-ordered. Comply with good laboratory practice as set out by the International Laboratory Accreditation Program and Singapore regulatory agencies such as the Medical Audit & Accreditation Unit. Comply with all requirements of the Institutional as well as Departmental Safety Manual. Comply with Institutional IT Security and Data Governance Comply with Institutional and National PDPA Regulation Keep current with new instrumentation, techniques and procedures by attending/participating in appropriate workshops, seminars and in-service education classes. Assist with the conduct of in-service education and continuing education classes. Assist with coaching of trainees and new staff in laboratory procedures. Guide Laboratory Technicians, Clerical staff and Health Attendants in their work when required. Perform shift duties as required. Promptly carry out the instruction(s) of senior staff with regard to work procedures and duties. Secondary Duties and Responsibilities (20%) Undertake back-up procedures in the event of emergencies such as loss of electrical power and information system crash. Participate and contribute to project teams as required. Participate in laboratory administrative work such as filing, processing of deliveries orders and invoices. Evaluate new laboratory test methodologies and instrumentation. Any other duties as assigned by supervisor. Requirements* BSc in Medical Laboratory Science or equivalent Good laboratory skills. Above average dexterity with good general health and no colour blindness. Basic computer literacy. Good planning and organizational skills Good communication and interpersonal skills. Service orientated and customer focused.

#J-18808-Ljbffr

Overview*

To perform laboratory diagnostic procedures and related activities so as to provide a quality laboratory service to our customers, both internal and external.

Job Responsibilities*

Primary Responsibilities and Duties (80%)

• Receive laboratory specimens and reject those that are unsuitable for analysis.
• Operate the Laboratory Information System to perform functions such as result query, order entry and result entry
• Perform waived tests and moderate complexity tests. Perform all procedures in accordance with laboratory protocols
• Alert appropriate laboratory personnel of critical values.
• Report any adverse incidents to senior member of staff.
• Prepare reagents and materials that require special handling to ensure reliability
• Receive and resolve queries from customers
• Undertake preventive maintenance on laboratory instrumentation. Notify appropriate laboratory personnel when laboratory instruments malfunction
• Notify appropriate laboratory personnel when test kits, reagents or other supplies should be re-ordered
• Perform shift duties as required
• Keep current with new instrumentation, techniques and procedures by attending/participating in appropriate workshops, seminars and in-service education classes
• Promptly carry out the instruction(s) of senior staff with regard to work procedures and duties
• Comply with good laboratory practice as set out by the Laboratory Accreditation Programme of the College of American Pathologists and Singapore regulatory agencies such as the Medical Audit & Accreditation Unit
• Comply with all requirements of the Laboratory Safety Manual.
• Comply with DLM Workplace Etiquette in line with NUHS Core Values.

Secondary Duties and Responsibilities (20%)

• Demonstrate laboratory procedures to trainees and new staff.
• Guide Laboratory Technicians, Clerical Staff and Health Attendants in their work when required.
• Participate in routine laboratory administrative work such as filling, processing of deliveries orders and invoices.
• Any other duties as assigned by supervisor

Requirements*

Qualification Required and Area of Discipline

• Diploma in Medical Laboratory Science

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

• Preferably with 1-2 years Clinical Laboratory experience
• Good laboratory skills
• Good general health and no colour blindness
• Basic computer skills
• Good initiative and attitude
• Good communication and interpersonal skills
• Service oriented and customer focused.
• Understands and meet NUHS CORE values.

#J-18808-Ljbffr

Overview* To perform laboratory diagnostic procedures and related activities so as to provide a quality laboratory service to our customers, both internal and external. Job Responsibilities* Primary Responsibilities and Duties (80%) Receive laboratory specimens and reject those that are unsuitable for analysis. Operate the Laboratory Information System to perform functions such as result query, order entry and result entry Perform waived tests and moderate complexity tests. Perform all procedures in accordance with laboratory protocols Alert appropriate laboratory personnel of critical values. Report any adverse incidents to senior member of staff. Prepare reagents and materials that require special handling to ensure reliability Receive and resolve queries from customers Undertake preventive maintenance on laboratory instrumentation. Notify appropriate laboratory personnel when laboratory instruments malfunction Notify appropriate laboratory personnel when test kits, reagents or other supplies should be re-ordered Perform shift duties as required Keep current with new instrumentation, techniques and procedures by attending/participating in appropriate workshops, seminars and in-service education classes Promptly carry out the instruction(s) of senior staff with regard to work procedures and duties Comply with good laboratory practice as set out by the Laboratory Accreditation Programme of the College of American Pathologists and Singapore regulatory agencies such as the Medical Audit & Accreditation Unit Comply with all requirements of the Laboratory Safety Manual. Comply with DLM Workplace Etiquette in line with NUHS Core Values. Secondary Duties and Responsibilities (20%) Demonstrate laboratory procedures to trainees and new staff. Guide Laboratory Technicians, Clerical Staff and Health Attendants in their work when required. Participate in routine laboratory administrative work such as filling, processing of deliveries orders and invoices. Any other duties as assigned by supervisor Requirements* Qualification Required and Area of Discipline Diploma in Medical Laboratory Science Required Competencies and Capabilities (Skills, Experiences and Professional Licences) Preferably with 1-2 years Clinical Laboratory experience Good laboratory skills Good general health and no colour blindness Basic computer skills Good initiative and attitude Good communication and interpersonal skills Service oriented and customer focused. Understands and meet NUHS CORE values.

#J-18808-Ljbffr

Supporting the smooth execution of hands-on surgical training programs This role provides direct, practical support, assisting healthcare professionals (HCPs) and during cadaveric courses. With a focus on operational excellence, the Procedural Specialist is responsible for the preparation, setup, and teardown of training stations, specimen handling, troubleshooting during sessions, and maintaining high standards of cleanliness, safety, and compliance within the lab.

What will you need to be successful?

Success in the role will require a combination of technical knowledge, soft skills, and a deep understanding of both the business and service-providing sides of an organization. Successful candidates would need the following:

• Minimum 1 year of experience in a surgical clinical orthopaedics environment, or equivalent experience working directly with healthcare professionals (HCPs) in a surgical or training setting
• Experience in inventory handling and working closely with healthcare professionals in training environment.
• Proven ability to work collaboratively with HCPs and internal stakeholders in high-paced, hands-on training environment.
• Strong understanding of regulatory standards and best practices for clinical and lab operations, prioritizing safety, and compliance.
• Skilled in cadaveric lab setup and handling specimens with universal precautions
• Familiarity with orthopaedic surgical instruments and lab equipment
• Strong understanding of infection control, health and safety, and lab compliance protocols
• Hands-on experience in inventory tracking and course logistic
• Excellent organizational, troubleshooting, and customer service skills

Ang Hoe Keong | EA Personnel Registration No.: R1106345

RS Recruitment Agency | EA License No. 17C8809

#J-18808-Ljbffr

Supporting the smooth execution of hands-on surgical training programs This role provides direct, practical support, assisting healthcare professionals (HCPs) and during cadaveric courses. With a focus on operational excellence, the Procedural Specialist is responsible for the preparation, setup, and teardown of training stations, specimen handling, troubleshooting during sessions, and maintaining high standards of cleanliness, safety, and compliance within the lab. What will you need to be successful?

Success in the role will require a combination of technical knowledge, soft skills, and a deep understanding of both the business and service-providing sides of an organization. Successful candidates would need the following: Minimum 1 year of experience in a surgical clinical orthopaedics environment, or equivalent experience working directly with healthcare professionals (HCPs) in a surgical or training setting Experience in inventory handling and working closely with healthcare professionals in training environment. Proven ability to work collaboratively with HCPs and internal stakeholders in high-paced, hands-on training environment. Strong understanding of regulatory standards and best practices for clinical and lab operations, prioritizing safety, and compliance. Skilled in cadaveric lab setup and handling specimens with universal precautions Familiarity with orthopaedic surgical instruments and lab equipment Strong understanding of infection control, health and safety, and lab compliance protocols Hands-on experience in inventory tracking and course logistic Excellent organizational, troubleshooting, and customer service skills Ang Hoe Keong | EA Personnel Registration No.: R1106345 RS Recruitment Agency | EA License No. 17C8809

#J-18808-Ljbffr

2 days ago Be among the first 25 applicants

Get AI-powered advice on this job and more exclusive features.

Direct message the job poster from CONTACTHINGS

HR Executive at Contacthings | BA (Hons) Business Management

Job Responsibilities:

• Full operation coverage on module support, including Level 1.5 debugging .
• Supporting lab operations through shift-based scheduling .
• Responding to requests via email, Microsoft Teams, or Redphone .
• Conducting routine preventive maintenance (PM) and basic corrective maintenance on tester equipment.
• Monitoring equipment performance, logging abnormalities, and escalating critical issues when necessary.
• Maintaining tools, jigs, and accessories in proper working condition.
• Ensuring compliance with ESD, safety , and lab operational protocols.

Job Requirements:

·Minimum SKM or Diploma in Mechanical/Electrical/Mechatronic Engineering or related field.

·Fresh graduates are preferred. Also open to individuals who have 1 year experience.

·Able to work in shift-based scheduling.

·Self-disciplined, proactive, and detail-oriented.

Seniority level

• Seniority level Entry level

Employment type

• Employment type Contract

Job function

• Job function Research, Analyst, and Information Technology
• Industries Semiconductor Manufacturing

Referrals increase your chances of interviewing at CONTACTHINGS by 2x

Get notified about new Laboratory Technician jobs in Bayan Lepas, Penang, Malaysia .

Asst Manager / Manager - Laboratory Operations Support R&D Graduate Technical Traineeship Program (Laboratory Project) Specialist HR Innovation Lab - Projects (ServiceNow HRSD, SuccessFactor) Specialist HR Innovation Lab - System Integration Project Manager HR Innovation Lab - Projects (ServiceNow HRSD)

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

- Maintain cleanliness in lab

- In charge of sample preparation, sample dispatch, application testing and update files/records

- To support tasks delegated by executive

- To support other R&D members

- Knowledge in basic computer skills

- Knowledge in basic Microsoft Word and Excel

- Follow instructions and work independently with guidance

- Malay / English

- Female Only

- Willingness to work overtime if required

- Team player

- Good attitude

- Diploma holder

- Experience in lab will be preferable

Working days: Monday-Saturday (Saturday alternate)

Working Time: 8am-5pm

Overtime rate: 1.5

Uniforms: Provided

Please note that we are located in Pelabuhan Tanjung Pelepas, so we prefer candidates who have their own license and transportation.

#J-18808-Ljbffr