What Jobs are available for Manufacturing Materials in Malaysia?
Showing 10 Manufacturing Materials jobs in Malaysia
Manufacturing Process Lead Engineer
Senai, Johor
Celestica
Posted today
Job Viewed
Job Description
Req ID:
Remote Position: No
Region: Asia
Country: Malaysia
State/Province: Johor
City: Senai
**Summary**
We are looking for a highly experienced **Senior Engineer** specializing in **Printed Circuit Board Assembly (PCBA)** to drive and execute process improvements with a **strong focus on New Product Introduction (NPI)** , preferably from **High-Mix Low-Volume (HMLV) manufacturing environments.**
The ideal candidate will leverage deep technical expertise to optimize PCBA processes, ensure scalable and high-quality solutions, and champion continuous improvement in yield, quality, and cost efficiency as an individual contributor and technical leader.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
**Manufacturing Process Engineering & NPI Execution**
+ Drive the technical execution of end-to-end NPI activities for PCBA, ensuring a robust and smooth transition from design to mass production.
+ Collaborate closely with the Internal DFM team, customers, manufacturing peers, and suppliers to ensure all DFM/DFT (Design for Manufacturing/Test) requirements are defined, met, and successfully implemented.
+ Apply advanced problem-solving skills to resolve complex technical challenges and production bottlenecks during prototyping, pilot runs, and production ramp-up.
**High-Mix Low-Volume (HMLV) Process Expertise**
+ Technically own and optimize PCBA processes for HMLV environments, ensuring maximum flexibility, high uptime, and efficiency.
+ Execute technical tasks related to BOM scrubbing, component obsolescence resolution, and alternate component qualification.
+ Partner with the internal equipment team to define, implement, and qualify processes that enable quick changeovers and minimal equipment downtime.
**Yield & Quality Improvement**
+ Develop, implement, and qualify technical process improvements such as PFMEA, poka-yoke mechanisms, and custom tooling (Jigs/fixtures) to achieve world-class first-pass yield.
+ Lead and execute deep-dive Root Cause Analysis (RCA) for complex PCBA failures and drive the implementation of robust corrective and preventive actions (CAPA).
+ Establish, monitor, and report on key process and quality metrics, and champion continuous improvement initiatives utilizing methodologies like Six Sigma and Lean.
**Cost-Saving & Lean Initiatives**
+ Identify, champion, and technically execute cost-reduction opportunities in material, process, and overhead areas without compromising quality or reliability.
+ Implement Lean manufacturing principles and tools (e.g., Value Stream Mapping) to eliminate process waste within PCBA production lines.
+ Optimize process yield to significantly reduce bonepile/scrap inventory, directly supporting HMLV inventory management goals.
**Cross-Functional Collaboration & Technical Communication**
+ Serve as the primary technical subject matter expert for PCBA processes within the organization.
+ Work closely with Test Engineering, Operations (Production), and QA teams to ensure process robustness, control, and product reliability.
+ Prepare and present technical data, project status, and key process findings to cross-functional stakeholders.
**Knowledge/Skills/Competencies**
**Education & Experience**
+ Bachelor's degree in Electrical/Electronic Engineering, Mechanical Engineering, or a related technical field. Master's degree preferred.
+ 5+ years of hands-on, progressive experience in PCBA manufacturing and New Product Introduction (NPI).
+ Proven track record of technical execution in HMLV manufacturing, yield improvement, and cost reduction.
+ Expert-level, practical working knowledge of IPC standards (IPC-A-610, IPC-7351) and all aspects of the PCBA assembly process (Stencil Printing, SMT, Reflow, Wave, Selective Soldering, AOI/AXI).
+ Demonstrated proficiency in applying methodologies such as Six Sigma, Lean, and Kaizen to solve complex technical problems.
**Soft Skills**
+ Exceptional analytical problem-solving skills and a strong sense of technical ownership.
+ Effective cross-functional collaboration and communication skills.
+ Highly data-driven and detail-oriented approach to decision-making.
**Preferred Qualifications**
+ Deep technical experience in developing and sustaining manufacturing processes for PCBA assembly.
+ Technical knowledge of thermal/mechanical stress analysis for reliability assessment.
+ Background in Industrial and Test measurement product compliance and qualification.
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.
Remote Position: No
Region: Asia
Country: Malaysia
State/Province: Johor
City: Senai
**Summary**
We are looking for a highly experienced **Senior Engineer** specializing in **Printed Circuit Board Assembly (PCBA)** to drive and execute process improvements with a **strong focus on New Product Introduction (NPI)** , preferably from **High-Mix Low-Volume (HMLV) manufacturing environments.**
The ideal candidate will leverage deep technical expertise to optimize PCBA processes, ensure scalable and high-quality solutions, and champion continuous improvement in yield, quality, and cost efficiency as an individual contributor and technical leader.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
**Manufacturing Process Engineering & NPI Execution**
+ Drive the technical execution of end-to-end NPI activities for PCBA, ensuring a robust and smooth transition from design to mass production.
+ Collaborate closely with the Internal DFM team, customers, manufacturing peers, and suppliers to ensure all DFM/DFT (Design for Manufacturing/Test) requirements are defined, met, and successfully implemented.
+ Apply advanced problem-solving skills to resolve complex technical challenges and production bottlenecks during prototyping, pilot runs, and production ramp-up.
**High-Mix Low-Volume (HMLV) Process Expertise**
+ Technically own and optimize PCBA processes for HMLV environments, ensuring maximum flexibility, high uptime, and efficiency.
+ Execute technical tasks related to BOM scrubbing, component obsolescence resolution, and alternate component qualification.
+ Partner with the internal equipment team to define, implement, and qualify processes that enable quick changeovers and minimal equipment downtime.
**Yield & Quality Improvement**
+ Develop, implement, and qualify technical process improvements such as PFMEA, poka-yoke mechanisms, and custom tooling (Jigs/fixtures) to achieve world-class first-pass yield.
+ Lead and execute deep-dive Root Cause Analysis (RCA) for complex PCBA failures and drive the implementation of robust corrective and preventive actions (CAPA).
+ Establish, monitor, and report on key process and quality metrics, and champion continuous improvement initiatives utilizing methodologies like Six Sigma and Lean.
**Cost-Saving & Lean Initiatives**
+ Identify, champion, and technically execute cost-reduction opportunities in material, process, and overhead areas without compromising quality or reliability.
+ Implement Lean manufacturing principles and tools (e.g., Value Stream Mapping) to eliminate process waste within PCBA production lines.
+ Optimize process yield to significantly reduce bonepile/scrap inventory, directly supporting HMLV inventory management goals.
**Cross-Functional Collaboration & Technical Communication**
+ Serve as the primary technical subject matter expert for PCBA processes within the organization.
+ Work closely with Test Engineering, Operations (Production), and QA teams to ensure process robustness, control, and product reliability.
+ Prepare and present technical data, project status, and key process findings to cross-functional stakeholders.
**Knowledge/Skills/Competencies**
**Education & Experience**
+ Bachelor's degree in Electrical/Electronic Engineering, Mechanical Engineering, or a related technical field. Master's degree preferred.
+ 5+ years of hands-on, progressive experience in PCBA manufacturing and New Product Introduction (NPI).
+ Proven track record of technical execution in HMLV manufacturing, yield improvement, and cost reduction.
+ Expert-level, practical working knowledge of IPC standards (IPC-A-610, IPC-7351) and all aspects of the PCBA assembly process (Stencil Printing, SMT, Reflow, Wave, Selective Soldering, AOI/AXI).
+ Demonstrated proficiency in applying methodologies such as Six Sigma, Lean, and Kaizen to solve complex technical problems.
**Soft Skills**
+ Exceptional analytical problem-solving skills and a strong sense of technical ownership.
+ Effective cross-functional collaboration and communication skills.
+ Highly data-driven and detail-oriented approach to decision-making.
**Preferred Qualifications**
+ Deep technical experience in developing and sustaining manufacturing processes for PCBA assembly.
+ Technical knowledge of thermal/mechanical stress analysis for reliability assessment.
+ Background in Industrial and Test measurement product compliance and qualification.
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.
Is this job a match or a miss?
This advertiser has chosen not to accept applicants from your region.
0
Lead Engineer, Manufacturing Process 1
Kulim, Kedah
Celestica
Posted 4 days ago
Job Viewed
Job Description
Req ID:
Remote Position: No
Region: Asia
Country: Malaysia
State/Province: Kedah
City: Kulim
**General Overview**
**Functional Area:** Engineering
**Career Stream:** Process Engineering Manufacturing
**SAP Short Name:** LEN-ENG-PRM
**Job Level:** Level 08
**IC/MGR:** Individual Contributor
**Direct/Indirect Indicator:** Indirect
**Summary**
The Lead Engineer, Manufacturing Process is responsible for designing, developing, deploying and optimizing processes for manufacturing to achieve quality cost and delivery goals for Celestica and its customers products.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Design, develop, and implement new manufacturing processes to support customer products.
+ Develop application software and tooling for a comprehensive set of complex machines and mechanical process steps within a manufacturing sector.
+ Implement plan and lead the assessment of the capability of machines and process applications using Design of Experiments and statistical methods across the full manufacturing process, ensuring maximum utilization of critical resources, maximum throughput, minimum cost and capacity growth.
+ Lead disciplined process for solving complex single stage or multistage product, process, component, and related problems that affect the efficient operation and/or manufacture of products through the full manufacturing process.
+ Initiate and lead the assessment and provide feedback to product designers on suitability of designs for manufacturability.
**Knowledge/Skills/Competencies**
Refer to technical skills below
**Physical Demands**
+ Duties of this position are performed in a normal office environment.
+ Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
+ Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
+ Occasional travel may be required.
**Typical Experience**
+ 1 to 3 years of related experienc;Experience in similar job roles
**Typical Education**
Bachelor degree or consideration of an equivalent combination of education and experience.
Educational Requirements may vary by Geography
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
Remote Position: No
Region: Asia
Country: Malaysia
State/Province: Kedah
City: Kulim
**General Overview**
**Functional Area:** Engineering
**Career Stream:** Process Engineering Manufacturing
**SAP Short Name:** LEN-ENG-PRM
**Job Level:** Level 08
**IC/MGR:** Individual Contributor
**Direct/Indirect Indicator:** Indirect
**Summary**
The Lead Engineer, Manufacturing Process is responsible for designing, developing, deploying and optimizing processes for manufacturing to achieve quality cost and delivery goals for Celestica and its customers products.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Design, develop, and implement new manufacturing processes to support customer products.
+ Develop application software and tooling for a comprehensive set of complex machines and mechanical process steps within a manufacturing sector.
+ Implement plan and lead the assessment of the capability of machines and process applications using Design of Experiments and statistical methods across the full manufacturing process, ensuring maximum utilization of critical resources, maximum throughput, minimum cost and capacity growth.
+ Lead disciplined process for solving complex single stage or multistage product, process, component, and related problems that affect the efficient operation and/or manufacture of products through the full manufacturing process.
+ Initiate and lead the assessment and provide feedback to product designers on suitability of designs for manufacturability.
**Knowledge/Skills/Competencies**
Refer to technical skills below
**Physical Demands**
+ Duties of this position are performed in a normal office environment.
+ Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
+ Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
+ Occasional travel may be required.
**Typical Experience**
+ 1 to 3 years of related experienc;Experience in similar job roles
**Typical Education**
Bachelor degree or consideration of an equivalent combination of education and experience.
Educational Requirements may vary by Geography
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
Is this job a match or a miss?
This advertiser has chosen not to accept applicants from your region.
1
06 - Associate Engineer, Manufacturing Process
Johor Bahru, Johor
Celestica
Posted today
Job Viewed
Job Description
Req ID:
Remote Position: No
Region: Asia
Country: Malaysia
State/Province: Johor
City: Johor Bahru
**General Overview**
**Functional Area:** Engineering
**Career Stream:** Process Engineering Manufacturing
**SAP Short Name:** AST-ENG-PRM
**Job Level:** Level 06
**IC/MGR:** Individual Contributor
**Direct/Indirect Indicator:** Indirect
**Summary**
The Associate Engineer, Manufacturing Process is responsible for designing, developing, deploying and optimizing processes for manufacturing to achieve quality cost and delivery goals for Celestica and its customers products.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Maintained system development and optimize manufacturing processes from warehouse through to start up until shipment operation.
+ Validate workmanship standards for manufacturing for the purpose improving output quality and efficiency.
+ Establish and maintain routings for manufacturing processes in Shop Floor system & SAP system.
+ Manage production request related to system and hardware issues
+ Perform system risk assessments during UAT test under new system released.
+ Maintain process documentation including work instructions, quality visual aids, etc.
+ Other duties and assignments as instructed by the department head from time to time.
+ To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure.
+ Able to carry out small KAIZEN automation project (Small standalone project).
**Knowledge/Skills/Competencies**
+ IT related knowledge especially on system design and concept
+ Knowledge on the MS Office suite especially on Excel (intermediate)
+ Previous experience in internal customer requests, project coordination, or related roles is advantageous
+ Well-organized, detail-oriented, ability to multi-task with great follow-up skills to maintain high-quality standards
+ Strong written and verbal communication skills across all levels of employees, fostering collaboration and understanding
+ Excellent presentation skills, with the ability to engage and convey information persuasively
**Typical Experience**
+ 3 years' experience in shop floor control system + database concept
+ SAP basic knowledge
**Typical Education**
+ Professional Certificate, Degree/Post Graduate in Information Technology
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.
Remote Position: No
Region: Asia
Country: Malaysia
State/Province: Johor
City: Johor Bahru
**General Overview**
**Functional Area:** Engineering
**Career Stream:** Process Engineering Manufacturing
**SAP Short Name:** AST-ENG-PRM
**Job Level:** Level 06
**IC/MGR:** Individual Contributor
**Direct/Indirect Indicator:** Indirect
**Summary**
The Associate Engineer, Manufacturing Process is responsible for designing, developing, deploying and optimizing processes for manufacturing to achieve quality cost and delivery goals for Celestica and its customers products.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Maintained system development and optimize manufacturing processes from warehouse through to start up until shipment operation.
+ Validate workmanship standards for manufacturing for the purpose improving output quality and efficiency.
+ Establish and maintain routings for manufacturing processes in Shop Floor system & SAP system.
+ Manage production request related to system and hardware issues
+ Perform system risk assessments during UAT test under new system released.
+ Maintain process documentation including work instructions, quality visual aids, etc.
+ Other duties and assignments as instructed by the department head from time to time.
+ To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure.
+ Able to carry out small KAIZEN automation project (Small standalone project).
**Knowledge/Skills/Competencies**
+ IT related knowledge especially on system design and concept
+ Knowledge on the MS Office suite especially on Excel (intermediate)
+ Previous experience in internal customer requests, project coordination, or related roles is advantageous
+ Well-organized, detail-oriented, ability to multi-task with great follow-up skills to maintain high-quality standards
+ Strong written and verbal communication skills across all levels of employees, fostering collaboration and understanding
+ Excellent presentation skills, with the ability to engage and convey information persuasively
**Typical Experience**
+ 3 years' experience in shop floor control system + database concept
+ SAP basic knowledge
**Typical Education**
+ Professional Certificate, Degree/Post Graduate in Information Technology
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.
Is this job a match or a miss?
This advertiser has chosen not to accept applicants from your region.
2
Associate Engineer, Manufacturing Process 1
Kulim, Kedah
Celestica
Posted 7 days ago
Job Viewed
Job Description
06 - Associate Engineer, Manufacturing Process 1
Req ID:
Remote Position: No
Hiring Manager: , Ooi Jin Aun
Band: 06
Region: Asia
Country: Malaysia
State/Province: Kedah
City: Kulim
**General Overview**
**Functional Area:** Engineering
**Career Stream:** Process Engineering Manufacturing
**SAP Short Name:** AST-ENG-PRM
**Job Level:** Level 06
**IC/MGR:** Individual Contributor
**Direct/Indirect Indicator:** Indirect
**Summary**
The Associate Engineer, Manufacturing Process is responsible for designing, developing, deploying and optimizing processes for manufacturing to achieve quality cost and delivery goals for Celestica and its customers products.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Develop and implement new manufacturing applications to support customer products.
+ Focus on developing application software and tooling for a complex machine or a series of several simpler, mechanical process steps.
+ Define process problems that lead to throughput or quality issues, evaluate cause of problem, and implement solutions to stabilize processes.
+ Support the evaluation of new equipment, coordinate software and hardware upgrades, set equipment specifications and qualification tests with supervision.
**Knowledge/Skills/Competencies**
Refer to technical skills below
**Physical Demands**
+ Duties of this position are performed in a normal office environment.
+ Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
+ Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
+ Occasional travel may be required.
**Typical Experience**
+ Entry level to 1 year
**Typical Education**
Bachelor degree or consideration of an equivalent combination of education and experience.
Educational Requirements may vary by Geography
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
Req ID:
Remote Position: No
Hiring Manager: , Ooi Jin Aun
Band: 06
Region: Asia
Country: Malaysia
State/Province: Kedah
City: Kulim
**General Overview**
**Functional Area:** Engineering
**Career Stream:** Process Engineering Manufacturing
**SAP Short Name:** AST-ENG-PRM
**Job Level:** Level 06
**IC/MGR:** Individual Contributor
**Direct/Indirect Indicator:** Indirect
**Summary**
The Associate Engineer, Manufacturing Process is responsible for designing, developing, deploying and optimizing processes for manufacturing to achieve quality cost and delivery goals for Celestica and its customers products.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Develop and implement new manufacturing applications to support customer products.
+ Focus on developing application software and tooling for a complex machine or a series of several simpler, mechanical process steps.
+ Define process problems that lead to throughput or quality issues, evaluate cause of problem, and implement solutions to stabilize processes.
+ Support the evaluation of new equipment, coordinate software and hardware upgrades, set equipment specifications and qualification tests with supervision.
**Knowledge/Skills/Competencies**
Refer to technical skills below
**Physical Demands**
+ Duties of this position are performed in a normal office environment.
+ Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
+ Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
+ Occasional travel may be required.
**Typical Experience**
+ Entry level to 1 year
**Typical Education**
Bachelor degree or consideration of an equivalent combination of education and experience.
Educational Requirements may vary by Geography
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
Is this job a match or a miss?
This advertiser has chosen not to accept applicants from your region.
3
Associate Engineer, Manufacturing Process 1 2
Kulim, Kedah
Celestica
Posted 5 days ago
Job Viewed
Job Description
Req ID:
Remote Position: No
Region: Asia
Country: Malaysia
State/Province: Kedah
City: Kulim
**General Overview**
**Functional Area:** Engineering
**Career Stream:** Process Engineering Manufacturing
**SAP Short Name:** AST-ENG-PRM
**Job Level:** Level 06
**IC/MGR:** Individual Contributor
**Direct/Indirect Indicator:** Indirect
**Summary**
The Associate Engineer, Manufacturing Process is responsible for designing, developing, deploying and optimizing processes for manufacturing to achieve quality cost and delivery goals for Celestica and its customers products.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Develop and implement new manufacturing applications to support customer products.
+ Focus on developing application software and tooling for a complex machine or a series of several simpler, mechanical process steps.
+ Define process problems that lead to throughput or quality issues, evaluate cause of problem, and implement solutions to stabilize processes.
+ Support the evaluation of new equipment, coordinate software and hardware upgrades, set equipment specifications and qualification tests with supervision.
**Knowledge/Skills/Competencies**
Refer to technical skills below
**Physical Demands**
+ Duties of this position are performed in a normal office environment.
+ Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
+ Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
+ Occasional travel may be required.
**Typical Experience**
+ Entry level to 1 year
**Typical Education**
Bachelor degree or consideration of an equivalent combination of education and experience.
Educational Requirements may vary by Geography
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.
Remote Position: No
Region: Asia
Country: Malaysia
State/Province: Kedah
City: Kulim
**General Overview**
**Functional Area:** Engineering
**Career Stream:** Process Engineering Manufacturing
**SAP Short Name:** AST-ENG-PRM
**Job Level:** Level 06
**IC/MGR:** Individual Contributor
**Direct/Indirect Indicator:** Indirect
**Summary**
The Associate Engineer, Manufacturing Process is responsible for designing, developing, deploying and optimizing processes for manufacturing to achieve quality cost and delivery goals for Celestica and its customers products.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Develop and implement new manufacturing applications to support customer products.
+ Focus on developing application software and tooling for a complex machine or a series of several simpler, mechanical process steps.
+ Define process problems that lead to throughput or quality issues, evaluate cause of problem, and implement solutions to stabilize processes.
+ Support the evaluation of new equipment, coordinate software and hardware upgrades, set equipment specifications and qualification tests with supervision.
**Knowledge/Skills/Competencies**
Refer to technical skills below
**Physical Demands**
+ Duties of this position are performed in a normal office environment.
+ Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
+ Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
+ Occasional travel may be required.
**Typical Experience**
+ Entry level to 1 year
**Typical Education**
Bachelor degree or consideration of an equivalent combination of education and experience.
Educational Requirements may vary by Geography
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.
Is this job a match or a miss?
This advertiser has chosen not to accept applicants from your region.
4
Associate Engineer, Manufacturing Process 1 1
Kulim, Kedah
Celestica
Posted 14 days ago
Job Viewed
Job Description
Req ID:
Remote Position: No
Region: Asia
Country: Malaysia
State/Province: Kedah
City: Kulim
**General Overview**
**Functional Area:** Engineering
**Career Stream:** Process Engineering Manufacturing
**SAP Short Name:** AST-ENG-PRM
**Job Level:** Level 06
**IC/MGR:** Individual Contributor
**Direct/Indirect Indicator:** Indirect
**Summary**
The Associate Engineer, Manufacturing Process is responsible for designing, developing, deploying and optimizing processes for manufacturing to achieve quality cost and delivery goals for Celestica and its customers products.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Develop and implement new manufacturing applications to support customer products.
+ Focus on developing application software and tooling for a complex machine or a series of several simpler, mechanical process steps.
+ Define process problems that lead to throughput or quality issues, evaluate cause of problem, and implement solutions to stabilize processes.
+ Support the evaluation of new equipment, coordinate software and hardware upgrades, set equipment specifications and qualification tests with supervision.
**Knowledge/Skills/Competencies**
Refer to technical skills below
**Physical Demands**
+ Duties of this position are performed in a normal office environment.
+ Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
+ Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
+ Occasional travel may be required.
**Typical Experience**
+ Entry level to 1 year
**Typical Education**
Bachelor degree or consideration of an equivalent combination of education and experience.
Educational Requirements may vary by Geography
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.
Remote Position: No
Region: Asia
Country: Malaysia
State/Province: Kedah
City: Kulim
**General Overview**
**Functional Area:** Engineering
**Career Stream:** Process Engineering Manufacturing
**SAP Short Name:** AST-ENG-PRM
**Job Level:** Level 06
**IC/MGR:** Individual Contributor
**Direct/Indirect Indicator:** Indirect
**Summary**
The Associate Engineer, Manufacturing Process is responsible for designing, developing, deploying and optimizing processes for manufacturing to achieve quality cost and delivery goals for Celestica and its customers products.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Develop and implement new manufacturing applications to support customer products.
+ Focus on developing application software and tooling for a complex machine or a series of several simpler, mechanical process steps.
+ Define process problems that lead to throughput or quality issues, evaluate cause of problem, and implement solutions to stabilize processes.
+ Support the evaluation of new equipment, coordinate software and hardware upgrades, set equipment specifications and qualification tests with supervision.
**Knowledge/Skills/Competencies**
Refer to technical skills below
**Physical Demands**
+ Duties of this position are performed in a normal office environment.
+ Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
+ Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
+ Occasional travel may be required.
**Typical Experience**
+ Entry level to 1 year
**Typical Education**
Bachelor degree or consideration of an equivalent combination of education and experience.
Educational Requirements may vary by Geography
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.
Is this job a match or a miss?
This advertiser has chosen not to accept applicants from your region.
5
Senior Process & Manufacturing Engineer
Prai
TE Connectivity
Posted 12 days ago
Job Viewed
Job Description
Senior Process & Manufacturing Engineer
**At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.**
**Job Description**
**Job Overview**
Implements manufacturing techniques, processes, tools, and machinery to maximize throughput; performs research on products and manufacturing processes and shares the same with senior engineers.
**Job Description**
**1. Manufacturing Process Development**
(i) Define, review and confirm the entire manufacturing process from start to finish.
(ii) Coordinate Design for Manufacturing (DFM) review, and initiate Process Failure Modes and Effects Analysis (PFMEA) with core team members.
(iii) Prepare documentations and process specifications for production.
(iv) Lead team in identification, tracking and resolution of engineering issues using the Failure Analysis and Corrective Action (FACA) form.
(v) Continuous manufacturing process improvement with TEOA tools for cost reduction.
**2. Assembly Tool, Fixture and Equipment Development**
(i) Evaluate new tool, fixture, and equipment demand/cost for new projects.
(ii) Design and review the tool, fixture and equipment with core team members meeting TE engineering and EHS requirement.
(iii) Upload all tooling prints to TE data management system(DM.TEC, PDMLink, etc.)
(iv) Discuss and review details of tool/fixture/equipment with outside supplier.
(v) Follow up the purchasing process to fabricate new tool/fixture/equipment.
**3. Qualification for Manufacturing process, Tool, Fixture, and Equipment**
(i) Condition all tool, fixture and equipment, lead the tool/fixture/equipment qualification by running samples or LVM.
(ii) Follow up the documentations for qualification, using TE standard format and follow up the approval.
(iii) Coordinate pilot run for new products and solve engineering issues, make sure the manufacturing process capability meet engineering, quality and customer requirement.
**4. Technician Guidance**
Coach, train and develop operator and technician in order to ensure their technique could be succeed and get continuous upgraded.
**What your background should look like**
1. Bechalor degree in engineering with related background. 7 years' working experiences in related field.
2. Good coordination and communication skill, accountability, integrity, customer focus.
**ABOUT TE CONNECTIVITY**
TE Connectivity plc (NYSE: TEL) is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, energy networks, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 9,000 engineers, working alongside customers in approximately 130 countries, TE ensures that EVERY CONNECTION COUNTS. Learn more at and on LinkedIn ( ,Facebook ( ,WeChat, ( Instagram andX (formerly Twitter). ( TE CONNECTIVITY OFFERS:**
We are pleased to offer you an exciting total package that can also be flexibly adapted to changing life situations - the well-being of our employees is our top priority!
- Competitive Salary Package
- Performance-Based Bonus Plans
- Health and Wellness Incentives
- Employee Stock Purchase Program
- Community Outreach Programs / Charity Events
- Employee Resource Group
**IMPORTANT NOTICE REGARDING RECRUITMENT FRAUD**
TE Connectivity has become aware of fraudulent recruitment activities being conducted by individuals or organizations falsely claiming to represent TE Connectivity. Please be advised that TE Connectivity **never requests payment or fees** from job applicants at any stage of the recruitment process. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come **only from** **actual** **email addresses ending in @te.com** . If you receive any suspicious communications, we strongly advise you not to engage or provide any personal information, and to report the incident to your local authorities.
Across our global sites and business units, we put together packages of benefits that are either supported by TE itself or provided by external service providers. In principle, the benefits offered can vary from site to site.
Location:
Prai, Penang, 07, MY, 13600
City: Prai, Penang
State: 07
Country/Region: MY
Travel: Less than 10%
Requisition ID:
Alternative Locations:
Function: Engineering & Technology
TE Connectivity and its subsidiaries, affiliates, and operating units (collectively, the "Company") is committed to providing a work environment that prohibits discrimination on the basis of age, color, disability, ethnicity, marital status, national origin, race, religion, gender, gender identity, sexual orientation, protected veteran status, disability or any other characteristics protected by applicable law or regulation.
**At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.**
**Job Description**
**Job Overview**
Implements manufacturing techniques, processes, tools, and machinery to maximize throughput; performs research on products and manufacturing processes and shares the same with senior engineers.
**Job Description**
**1. Manufacturing Process Development**
(i) Define, review and confirm the entire manufacturing process from start to finish.
(ii) Coordinate Design for Manufacturing (DFM) review, and initiate Process Failure Modes and Effects Analysis (PFMEA) with core team members.
(iii) Prepare documentations and process specifications for production.
(iv) Lead team in identification, tracking and resolution of engineering issues using the Failure Analysis and Corrective Action (FACA) form.
(v) Continuous manufacturing process improvement with TEOA tools for cost reduction.
**2. Assembly Tool, Fixture and Equipment Development**
(i) Evaluate new tool, fixture, and equipment demand/cost for new projects.
(ii) Design and review the tool, fixture and equipment with core team members meeting TE engineering and EHS requirement.
(iii) Upload all tooling prints to TE data management system(DM.TEC, PDMLink, etc.)
(iv) Discuss and review details of tool/fixture/equipment with outside supplier.
(v) Follow up the purchasing process to fabricate new tool/fixture/equipment.
**3. Qualification for Manufacturing process, Tool, Fixture, and Equipment**
(i) Condition all tool, fixture and equipment, lead the tool/fixture/equipment qualification by running samples or LVM.
(ii) Follow up the documentations for qualification, using TE standard format and follow up the approval.
(iii) Coordinate pilot run for new products and solve engineering issues, make sure the manufacturing process capability meet engineering, quality and customer requirement.
**4. Technician Guidance**
Coach, train and develop operator and technician in order to ensure their technique could be succeed and get continuous upgraded.
**What your background should look like**
1. Bechalor degree in engineering with related background. 7 years' working experiences in related field.
2. Good coordination and communication skill, accountability, integrity, customer focus.
**ABOUT TE CONNECTIVITY**
TE Connectivity plc (NYSE: TEL) is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, energy networks, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 9,000 engineers, working alongside customers in approximately 130 countries, TE ensures that EVERY CONNECTION COUNTS. Learn more at and on LinkedIn ( ,Facebook ( ,WeChat, ( Instagram andX (formerly Twitter). ( TE CONNECTIVITY OFFERS:**
We are pleased to offer you an exciting total package that can also be flexibly adapted to changing life situations - the well-being of our employees is our top priority!
- Competitive Salary Package
- Performance-Based Bonus Plans
- Health and Wellness Incentives
- Employee Stock Purchase Program
- Community Outreach Programs / Charity Events
- Employee Resource Group
**IMPORTANT NOTICE REGARDING RECRUITMENT FRAUD**
TE Connectivity has become aware of fraudulent recruitment activities being conducted by individuals or organizations falsely claiming to represent TE Connectivity. Please be advised that TE Connectivity **never requests payment or fees** from job applicants at any stage of the recruitment process. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come **only from** **actual** **email addresses ending in @te.com** . If you receive any suspicious communications, we strongly advise you not to engage or provide any personal information, and to report the incident to your local authorities.
Across our global sites and business units, we put together packages of benefits that are either supported by TE itself or provided by external service providers. In principle, the benefits offered can vary from site to site.
Location:
Prai, Penang, 07, MY, 13600
City: Prai, Penang
State: 07
Country/Region: MY
Travel: Less than 10%
Requisition ID:
Alternative Locations:
Function: Engineering & Technology
TE Connectivity and its subsidiaries, affiliates, and operating units (collectively, the "Company") is committed to providing a work environment that prohibits discrimination on the basis of age, color, disability, ethnicity, marital status, national origin, race, religion, gender, gender identity, sexual orientation, protected veteran status, disability or any other characteristics protected by applicable law or regulation.
Is this job a match or a miss?
This advertiser has chosen not to accept applicants from your region.
Be The First To Know
About the latest Manufacturing materials Jobs in Malaysia !
6
ENGR SR, PROCESS / MANUFACTURING
Seremban, Negeri Sembilan
onsemi
Posted 13 days ago
Job Viewed
Job Description
**Job Summary:**
As a Manufacturing Equipment Engineer, you will have the responsibility for uptime and performance of semiconductor manufacturing equipment and support areas. The candidate will be given the opportunity to work with the technical support groups to identify, lead, and implement creative solutions to improve equipment performance and reduce cost. The candidate will manage new equipment installs by coordinating tasks with various groups to ensure an on time, on budget, and qualified tool to release to production. This position will be responsible for CVD equipment in fab for SACVD, PECVD, and LPCVD processes.
In the first 3 months you will:
- Develop a basic understanding of the manufacturing and support systems and site culture.
- Begin to identify, and work with leadership to prioritize, opportunities for improvement in the CVD area.
- Demonstrate an understanding of current practices and specifications and develop an actionable plan for continuous improvement, yield improvement, cost savings, projects, etc.
- Develop and implement a migration strategy from preventive to predictive maintenance
**onsemi** (Nasdaq: ON) is driving disruptive innovations to help build a better future. With a focus on automotive and industrial end-markets, the company is accelerating change in megatrends such as vehicle electrification and safety, sustainable energy grids, industrial automation, and 5G and cloud infrastructure. With a highly differentiated and innovative product portfolio, onsemi creates intelligent power and sensing technologies that solve the world's most complex challenges and leads the way in creating a safer, cleaner, and smarter world.
**More details about our company benefits can be found here:**
are committed to sourcing, attracting, and hiring high-performance innovators, while providing all candidates a positive recruitment experience that builds our brand as a great place to work.
Is this job a match or a miss?
This advertiser has chosen not to accept applicants from your region.
7
ENGR I, PROCESS / MANUFACTURING ENGINEERING
Seremban, Negeri Sembilan
onsemi
Posted 13 days ago
Job Viewed
Job Description
**Job Summary:**
Reporting to the Section Manager of Process Engineering, this position is responsible to support wire bond process. The Senior Process Engineer is responsible on providing technical leadership, support, and training to internal and external customers.
**onsemi** (Nasdaq: ON) is driving disruptive innovations to help build a better future. With a focus on automotive and industrial end-markets, the company is accelerating change in megatrends such as vehicle electrification and safety, sustainable energy grids, industrial automation, and 5G and cloud infrastructure. With a highly differentiated and innovative product portfolio, onsemi creates intelligent power and sensing technologies that solve the world's most complex challenges and leads the way in creating a safer, cleaner, and smarter world.
**More details about our company benefits can be found here:**
are committed to sourcing, attracting, and hiring high-performance innovators, while providing all candidates a positive recruitment experience that builds our brand as a great place to work.
Reporting to the Section Manager of Process Engineering, this position is responsible to support wire bond process. The Senior Process Engineer is responsible on providing technical leadership, support, and training to internal and external customers.
**onsemi** (Nasdaq: ON) is driving disruptive innovations to help build a better future. With a focus on automotive and industrial end-markets, the company is accelerating change in megatrends such as vehicle electrification and safety, sustainable energy grids, industrial automation, and 5G and cloud infrastructure. With a highly differentiated and innovative product portfolio, onsemi creates intelligent power and sensing technologies that solve the world's most complex challenges and leads the way in creating a safer, cleaner, and smarter world.
**More details about our company benefits can be found here:**
are committed to sourcing, attracting, and hiring high-performance innovators, while providing all candidates a positive recruitment experience that builds our brand as a great place to work.
Is this job a match or a miss?
This advertiser has chosen not to accept applicants from your region.
8
ENGR II, PROCESS / MANUFACTURING / MANUFACTURING EQUIPMENT
Seremban, Negeri Sembilan
onsemi
Posted 13 days ago
Job Viewed
Job Description
**Job Summary:**
Develops and modifies process formulations, methods, and controls to meet quality standards. Typically performs one or more of the following in the capacity of either an individual contributor (as directed and/or independently) or as a manager:
+ Create, analyze, and review technical charts.
+ Develop and modify process formulations, methods, and controls to meet quality standards.
+ Establish SOP (Standard operating process) and FMEA (Failure mode and effects analysis) for related process.
+ Review product development requirements for compatibility with processing methods to determine costs and schedules.
+ Integrates equipment and material capabilities to meet process module and technology specifications.
+ Drive CIP (Continuous improvement plans) to improve process performance indices.
+ Work with cross functions teams to deliver organizational goals.
+ Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements.
+ Work and collaborate on other projects and/or assignments as needed.
+ Shows mastery of some aspects of a technical discipline, with recognition for his/her contributions as a technical team member.
+ Initiative and creativity are exercised within limits defined by job scope.
+ Uses standard engineering methods to analyze and resolve problems.
+ Works on projects, assignments, and problems of moderate scope.
+ Coaches' students.
+ Participates in teams.
**onsemi** (Nasdaq: ON) is driving disruptive innovations to help build a better future. With a focus on automotive and industrial end-markets, the company is accelerating change in megatrends such as vehicle electrification and safety, sustainable energy grids, industrial automation, and 5G and cloud infrastructure. With a highly differentiated and innovative product portfolio, onsemi creates intelligent power and sensing technologies that solve the world's most complex challenges and leads the way in creating a safer, cleaner, and smarter world.
**More details about our company benefits can be found here:**
are committed to sourcing, attracting, and hiring high-performance innovators, while providing all candidates a positive recruitment experience that builds our brand as a great place to work.
Is this job a match or a miss?
This advertiser has chosen not to accept applicants from your region.
9