647 Manufacturing Engineering jobs in Malaysia

Req ID: 127649
Remote Position: No
Region: Asia
Country: Malaysia
State/Province: Johor
City: Senai
**Summary**
We are looking for an experienced **Engineering Manager** specializing in **Printed Circuit Board Assembly (PCBA)** to lead our hardware team with a strong focus on **Existing customer growths and New Product Introduction (NPI),** high preferable from **High-Mix Low-Volume working experiences (HMLV)** manufacturing, and continuous improvement in yield, quality, and cost efficiency.
The ideal candidate will drive PCBA process improvement, manufacturing optimization, NPI support and cross-functional collaboration to ensure scalable, high-quality, and cost-effective solutions.
**Detailed Description**
Performs tasks such as, but not limited to, the following:
**Manufacturing Engineering/NPI (New Product Introduction) Leadership**
+ Oversee end-to-end NPI activities for PCBA, ensuring smooth transition from design to mass production.
+ Collaborate with Internal DFM team and customer, manufacturing peers, and suppliers to meet DFM/DFT (Design for Manufacturing/Test) requirement
+ Resolve technical challenges during prototyping, pilot runs, and production ramp-up.
**High-Mix Low-Volume (HMLV) Process Expertise**
+ Optimize PCBA processes for HMLV environments, ensuring flexibility and efficiency.
+ Manage BOM optimization, component obsolescence, and alternate sourcing strategies.
+ Work closely with internal equipment team to ensure quick changeovers and minimal downtime.
**Detailed Description 2**
**Yield & Quality Improvement**
+ Develop PFMEA and implement poka-yoke solution, technical action (Jig/fixtures) to improve first-pass yield.
+ Lead root cause analysis (RCA) for PCBA failures and implement corrective actions.
+ Establish quality metrics and drive continuous improvement (e.g., Six Sigma, Lean methodologies).
+ Deep knowledge for root cause analysis
**Cost-Saving & Lean Initiatives**
+ Identify and execute cost-reduction opportunities, Material, overhead reduction without compromising quality.
+ Implement **Lean manufacturing** principles to eliminate waste in PCBA processes.
+ Optimize inventory management for HMLV production through good yield to reduce bonepile inventory.
**Team & Cross-Functional Leadership**
+ Mentor Engineers and technicians for manufacturing teams.
+ Collaborate with Test engineering, Operation (Production), and QA teams to ensure product reliability.
+ Communicate technical and project updates to senior management.
**Knowledge/Skills/Competencies**
+ **Education:** Bachelor's/Master's in Electrical/Electronic Engineering or related field.
+ **Experiences:** 8+ years in PCBA manufacturing /NPI, including 3+ years in leadership.
+ Proven track record in **HMLV manufacturing, yield improvement, and cost reduction**.
+ Expertise in IPC standards (IPC-A-610, IPC-7351).
+ Familiarity with Six Sigma, Lean, and Kaizen methodologies.
+ **Soft Skills:** Strong problem-solving, stakeholder management, and data-driven decision-making.
**Preferred Qualifications:**
+ Experience in Manufacturing engineering for PCBA assembly.
+ Knowledge of **thermal/mechanical stress analysis** for reliability.
+ Background in Industrial and Test measurement product compliance .
**Key Enhancements**
+ Stronger PCBA Process / NPI focus*- Added end-to-end ownership of prototyping to production.
+ HMLV expertise - Highlighted process flexibility and supply chain challenges.
+ Yield/quality/cost - Explicitly called out Lean, Six Sigma, and RCA.
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Press Tab to Move to Skip to Content Link Select how often (in days) to receive an alert: Manufacturing Process Engineering Manager

Date:

Jul 30, 2025 Location:

Senai, 01, MY Req ID: 127649 Remote Position: No Region: Asia Country: Malaysia State/Province: Johor City: Senai We are looking for an experienced

Engineering Manager

specializing in

Printed Circuit Board Assembly (PCBA)

to lead our hardware team with a strong focus on

Existing customer growths and New Product Introduction (NPI),

high preferable from

High-Mix Low-Volume working experiences (HMLV)

manufacturing, and continuous improvement in yield, quality, and cost efficiency. The ideal candidate will drive PCBA process improvement, manufacturing optimization, NPI support and cross-functional collaboration to ensure scalable, high-quality, and cost-effective solutions. Detailed Description

Oversee end-to-end NPI activities for PCBA, ensuring smooth transition from design to mass production. Collaborate with Internal DFM team and customer, manufacturing peers, and suppliers to meet DFM/DFT (Design for Manufacturing/Test) requirement Resolve technical challenges during prototyping, pilot runs, and production ramp-up. High-Mix Low-Volume (HMLV) Process Expertise Optimize PCBA processes for HMLV environments, ensuring flexibility and efficiency. Manage BOM optimization, component obsolescence, and alternate sourcing strategies. Work closely with internal equipment team to ensure quick changeovers and minimal downtime. Detailed Description 2

Yield & Quality Improvement Develop PFMEA and implement poka-yoke solution, technical action (Jig/fixtures) to improve first-pass yield. Lead root cause analysis (RCA) for PCBA failures and implement corrective actions. Establish quality metrics and drive continuous improvement (e.g., Six Sigma, Lean methodologies). Deep knowledge for root cause analysis Cost-Saving & Lean Initiatives Identify and execute cost-reduction opportunities, Material, overhead reduction without compromising quality. Implement **Lean manufacturing** principles to eliminate waste in PCBA processes. Optimize inventory management for HMLV production through good yield to reduce bonepile inventory. Team & Cross-Functional Leadership Mentor Engineers and technicians for manufacturing teams. Collaborate with Test engineering, Operation (Production), and QA teams to ensure product reliability. Communicate technical and project updates to senior management. Education:

Bachelor’s/Master’s in Electrical/Electronic Engineering or related field. Experiences:

8+ years in PCBA manufacturing /NPI, including 3+ years in leadership. Proven track record in **HMLV manufacturing, yield improvement, and cost reduction**. Expertise in IPC standards (IPC-A-610, IPC-7351). Familiarity with Six Sigma, Lean, and Kaizen methodologies. Soft Skills:

Strong problem-solving, stakeholder management, and data-driven decision-making. Preferred Qualifications: Experience in Manufacturing engineering for PCBA assembly. Knowledge of **thermal/mechanical stress analysis** for reliability. Background in Industrial and Test measurement product compliance . Stronger PCBA Process / NPI focus*– Added end-to-end ownership of prototyping to production. HMLV expertise – Highlighted process flexibility and supply chain challenges. Yield/quality/cost – Explicitly called out Lean, Six Sigma, and RCA. Notes

This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time. Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law). At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them. COMPANY OVERVIEW: Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers. Celestica would like to thank all applicants, however, only qualified applicants will be contacted. Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

#J-18808-Ljbffr

**Job Summary:**
Reporting to the Section Manager of Process Engineering, this position is responsible to support wire bond process. The Senior Process Engineer is responsible on providing technical leadership, support, and training to internal and external customers.
**onsemi** (Nasdaq: ON) is driving disruptive innovations to help build a better future. With a focus on automotive and industrial end-markets, the company is accelerating change in megatrends such as vehicle electrification and safety, sustainable energy grids, industrial automation, and 5G and cloud infrastructure. With a highly differentiated and innovative product portfolio, onsemi creates intelligent power and sensing technologies that solve the world's most complex challenges and leads the way in creating a safer, cleaner, and smarter world.
**More details about our company benefits can be found here:**
are committed to sourcing, attracting, and hiring high-performance innovators, while providing all candidates a positive recruitment experience that builds our brand as a great place to work.

Press Tab to Move to Skip to Content Link

Select how often (in days) to receive an alert:

Select how often (in days) to receive an alert:

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.Job Overview

Lead and manage manufacturing engineering with the objective of ensuring on time and successful delivery of the projects and provision of effective support to new business within TE operation and engineering plan and budget.

Job Requirements

Manufacturing Engineering

Develop advanced process technology; review automation project, Cost saving project; review new sample making reports; and provide technical support to key project in order to effectively support production and business development.

• Develop, evaluate, and improve manufacturing methods, processes, and workflows.

• Implement Lean Manufacturing and continuous improvement initiatives.

• Collaborate with design and quality teams on new product introductions.

• Ensure equipment, tooling, and facilities are optimized for productivity and safety.

• Troubleshoot production issues and recommend corrective actions.

• Conduct time and motion studies and establish standard operating procedures (SOPs).

• Monitor and analyze production data to identify trends and areas for improvement.

• Ensure compliance with safety, quality, and regulatory standards.

• Coordinate with vendors and suppliers for materials, tools, and machinery.

• Provide training and technical support to production staff.

Planning and Budgeting

Develop and implement section budget and plan, and monitor the achievement of the budgetin order to achieve targeted department performance.

Policies and Procedures

Implement new global product development policies, procedures and systems; and maintain and develop local product development policies, proceduresin order to meet TE's global requirements.

People Management & Development

Allocate and balance the allocation of work across direct reports; review and provide timely performance feedback to direct reports; mentor, develop and motivate them; help resolve people/functional issues in the teamin order to achieve targeted performance and retain key talent.

Asset Management

Manage fixed asset and find new opportunity to reuse idle asset on new project in order to reduce product cost.

What your background should look like

• Bachelor's Degree with engineering and sciences in Mechanical, electrical & electronic, IE;
• 12 - 15 years cable assembly working experience including 5 years management experience.

Competencies SET : Strategy, Execution, Talent (for managers)

Location:

Prai, Penang, 07, MY, 13600

State: 07

Country/Region: MY

Travel: 10% to 25%

Requisition ID: 138725

Alternative Locations:

Job Segment: Manufacturing Engineer, Engineering Manager, Compliance, Engineer, Industrial, Engineering, Legal, Manufacturing

Provider

Description

Enabled

SAP as service provider

• "route" is used for session stickiness
• "careerSiteCompanyId" is used to send the request to the correct data center
• "JSESSIONID" is placed on the visitor's device during the session so the server can identify the visitor

Provider

Description

Enabled

YouTube

Provider

Description

Enabled

LinkedIn

#J-18808-Ljbffr

A manufacturing engineering manager is responsible for the overall function of the manufacturing processes for a company. In this role, you need to lead the Manufacturing Engineering Department, which includes New Product Introduction, new line setup, product transfer, process development and optimization, continuous improvement, engineering change control, etc.

What You Will Do

1. Lead the Manufacturing Engineering Department, which includes New Product Introduction, new line setup, product transfer, process development and optimization, continuous improvement, engineering change control, etc.
2. Work with product engineers/tooling team to define manufacturing processes.
3. Work with all relevant functions to ensure manufacturing line readiness.
4. Provide ME support to operations for smooth day-to-day manufacturing and continuous improvement.
5. Improve OEE (Operation Efficiency) metrics such as up-time, throughput, and scrap rate.
6. Identify and drive OPEX labor savings projects to support annual cost savings.
7. Facilitate Kaizen events and other Lean activities for continuous improvement.
8. Support new business pursuits by participating in the design phase and leading manufacturing during the Product Development Process (Phase/Gate).
9. Drive standardization of manufacturing processes.
10. Lead automation initiatives for new and existing programs.
11. Oversee team capability development.
12. Define the manufacturing process technology roadmap.
13. Conduct training and coaching for Manufacturing Engineers.
14. Manage conflicts between customer program execution and standard product capability growth.
15. Establish and review ME KPIs regularly.
16. Perform other assigned tasks.

We Are Looking For

• Bachelor's degree in mechanical engineering, mechatronics, or automation.
• Strong communication skills.
• Excellent oral and written English skills.
• 10+ years of experience in manufacturing engineering, preferably in CNC precision parts machining and electro-mechanical assembly environments.
• 5+ years of NPI and engineering management experience, including leading teams.
• Expertise with Lean / Six Sigma Manufacturing, 5S, and Root Cause Analysis.
• Familiarity with quality systems such as ISO9001, QS9000, and IATF16949.
• Motor manufacturing experience is a plus.

AMETEK, Inc. is a leading global provider of industrial technology solutions serving diverse niche markets with annual sales over $7.0 billion.

AMETEK is committed to making a safer, sustainable, and more productive world. We employ differentiated technology solutions to solve our customers’ most complex challenges. Our team of 21,000 colleagues across 35 countries is grounded in our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is part of the S&P 500. Visit for more information.

#J-18808-Ljbffr

Job Title: Manufacturing Engineering Manager

Location: Penang, MY, 11900

Business Unit: Haydon Kerk Pittman

Posting Date: Mar 6, 2025

A manufacturing engineering manager is responsible for the overall function of the manufacturing processes for a company. In this role, you need to lead the Manufacturing Engineering Department, which includes New Product Introduction, new line setup, product transfer, process development and optimization, continuous improvement, engineering change control, etc.

What you will do:

• Lead the Manufacturing Engineering Department, which includes New Product Introduction, new line setup, product transfer, process development and optimization, continuous improvement, engineering change control, etc.
• Work with product engineers/tooling team to define manufacturing processes.
• Work with all relevant functions to ensure manufacturing line readiness.
• Provide ME support to operations for smooth day-to-day manufacturing and continuous improvement.
• OEE (Operation Efficiency) improvement (ie. up-time, throughput, scrap rate, etc.)
• Identify and drive OPEX Labor savings projects to support annual cost savings budget.
• Facilitate Kaizen events and other Lean activities for continuous improvement.
• Actively support new business pursuit by participating in the design phase and leading the manufacturing phase of the Product Development Process (Phase/Gate).
• Drive standardization of manufacturing processes.
• Lead automation for new and existing programs.
• Responsible for team capability growth.
• Define manufacturing process technology roadmap.
• Conduct training/coaching of MEs.
• Manage the conflict between customer program execution and standard product capability growth.
• Define ME KPIs and review them regularly.
• Other assigned tasks.

We are looking for:

• Bachelor's degree, major in mechanical engineering, mechatronics, or automation.
• Strong communication skills.
• Excellent oral and written English skills.
• 10+ years of experience in manufacturing engineering, preferably in CNC precision part machining and electro-mechanical part assembly environment.
• 5+ years of NPI and engineering management experience (leading people experience).
• Expertise with Lean / Six Sigma Manufacturing, 5S, and Root Cause Analysis.
• Familiarity with quality systems such as ISO9001/QS9000/IATF16949.
• Motor manufacturing experience is a plus.

#J-18808-Ljbffr

SUPV MANUFACTURING ENGINEERING
At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.
**Job Overview**
Oversees a team of manufacturing engineering specialists.
**Job Description**
**Job Responsibilities:**
+ Supervise, coach, and develop a team of manufacturing engineers and technicians.
+ Drive continuous improvement in production processes to achieve safety, quality, delivery, and cost targets.
+ Lead problem-solving and root cause analysis for production issues.
+ Ensure effective deployment of Lean Manufacturing and Six Sigma practices.
+ Collaborate with cross-functional teams (Quality, Production, Maintenance, Supply Chain) to support new product introduction and process validation.
+ Oversee equipment installation, qualification, and preventive maintenance planning.
+ Monitor and analyze key performance indicators (OEE, scrap, downtime) and implement corrective actions.
+ Ensure compliance with EHS standards and promote a safe working environment.
+ Manage documentation, process flow, work instructions, and ensure alignment with ISO/IATF requirements.
+ Drive cost reduction, productivity improvement, and process automation initiatives
**Job Requirements:**
+ Bachelor's degree in Mechanical, Electrical, Manufacturing, or Industrial Engineering (or related field).
+ Minimum 5-7 years of manufacturing engineering experience, with at least 2 years in a supervisory/lead role.
+ Strong knowledge of Lean Manufacturing, Six Sigma, and statistical process control (SPC).
+ Hands-on experience in process improvement, automation, and equipment qualification.
+ Good understanding of ISO/IATF 16949, EHS, and regulatory requirements.
+ Excellent leadership, communication, and problem-solving skills.
+ Ability to work in a fast-paced, high-volume manufacturing environment.
**What your background should look like**
Generally requires Bachelors degree in appropriate field with a minimum of 5 years of progressively responsible professional level experience; Masters degree or higher or local equivalent may be preferred at this level
**Competencies**
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork
Location:
Prai, Penang, 07, MY, 13600
City: Prai, Penang
State: 07
Country/Region: MY
Travel: None
Requisition ID: 138377
Alternative Locations:
Function: Engineering & Technology
TE Connectivity and its subsidiaries, affiliates, and operating units (collectively, the "Company") is committed to providing a work environment that prohibits discrimination on the basis of age, color, disability, ethnicity, marital status, national origin, race, religion, gender, gender identity, sexual orientation, protected veteran status, disability or any other characteristics protected by applicable law or regulation.

MANUFACTURING ENGINEERING MANAGER
At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.
**Job Overview**
Lead and manage manufacturing engineering **with the objective** of ensuring on time and successful delivery of the projects and provision of effective support to new business **within** TE operation and engineering plan and budget.
**Job Requirements**
**Manufacturing Engineering**
Develop advanced process technology; review automation project, Cost saving project; review new sample making reports; and provide technical support to key project in order to effectively support production and business development.
+ Develop, evaluate, and improve manufacturing methods, processes, and workflows.
+ Implement Lean Manufacturing and continuous improvement initiatives.
+ Collaborate with design and quality teams on new product introductions.
+ Ensure equipment, tooling, and facilities are optimized for productivity and safety.
+ Troubleshoot production issues and recommend corrective actions.
+ Conduct time and motion studies and establish standard operating procedures (SOPs).
+ Monitor and analyze production data to identify trends and areas for improvement.
+ Ensure compliance with safety, quality, and regulatory standards.
+ Coordinate with vendors and suppliers for materials, tools, and machinery.
+ Provide training and technical support to production staff.
**Planning and Budgeting**
Develop and implement section budget and plan, and monitor the achievement of the budget _in order to_ achieve targeted department performance.
**Policies and Procedures**
Implement new global product development policies, procedures and systems; and maintain and develop local product development policies, procedures _in order to_ meet TE's global requirements.
**People Management & Development**
Allocate and balance the allocation of work across direct reports; review and provide timely performance feedback to direct reports; mentor, develop and motivate them; help resolve people/functional issues in the team _in order to_ achieve targeted performance and retain key talent.
**Asset Management**
Manage fixed asset and find new opportunity to reuse idle asset on new project in order to reduce product cost.
**What your background should look like**
+ Bachelor's Degree with engineering and sciences in Mechanical, electrical & electronic, IE;
+ 12 - 15 years cable assembly working experience including 5 years management experience.
**Competencies**
SET : Strategy, Execution, Talent (for managers)
Location:
Prai, Penang, 07, MY, 13600
City: Prai, Penang
State: 07
Country/Region: MY
Travel: 10% to 25%
Requisition ID: 138725
Alternative Locations:
Function: Engineering & Technology
TE Connectivity and its subsidiaries, affiliates, and operating units (collectively, the "Company") is committed to providing a work environment that prohibits discrimination on the basis of age, color, disability, ethnicity, marital status, national origin, race, religion, gender, gender identity, sexual orientation, protected veteran status, disability or any other characteristics protected by applicable law or regulation.

Job Title: Manufacturing Engineering Manager

Location: Penang, MY, 11900 Business Unit: Haydon Kerk Pittman Posting Date: Mar 6, 2025 A manufacturing engineering manager is responsible for the overall function of the manufacturing processes for a company. In this role, you need to lead the Manufacturing Engineering Department, which includes New Product Introduction, new line setup, product transfer, process development and optimization, continuous improvement, engineering change control, etc. What you will do: Lead the Manufacturing Engineering Department, which includes New Product Introduction, new line setup, product transfer, process development and optimization, continuous improvement, engineering change control, etc. Work with product engineers/tooling team to define manufacturing processes. Work with all relevant functions to ensure manufacturing line readiness. Provide ME support to operations for smooth day-to-day manufacturing and continuous improvement. OEE (Operation Efficiency) improvement (ie. up-time, throughput, scrap rate, etc.) Identify and drive OPEX Labor savings projects to support annual cost savings budget. Facilitate Kaizen events and other Lean activities for continuous improvement. Actively support new business pursuit by participating in the design phase and leading the manufacturing phase of the Product Development Process (Phase/Gate). Drive standardization of manufacturing processes. Lead automation for new and existing programs. Responsible for team capability growth. Define manufacturing process technology roadmap. Conduct training/coaching of MEs. Manage the conflict between customer program execution and standard product capability growth. Define ME KPIs and review them regularly. Other assigned tasks. We are looking for: Bachelor's degree, major in mechanical engineering, mechatronics, or automation. Strong communication skills. Excellent oral and written English skills. 10+ years of experience in manufacturing engineering, preferably in CNC precision part machining and electro-mechanical part assembly environment. 5+ years of NPI and engineering management experience (leading people experience). Expertise with Lean / Six Sigma Manufacturing, 5S, and Root Cause Analysis. Familiarity with quality systems such as ISO9001/QS9000/IATF16949. Motor manufacturing experience is a plus.

#J-18808-Ljbffr