263 Manufacturing Engineer jobs in Malaysia

Purpose Statement
Under supervisory direction, works closely with R&D and Manufacturing in the development of robust, capable, cost effective & safe manufacturing processes. equipment, materials and products and supports efficient and effective transfer of new products & processes into commercial production.

About Us
As a global medical technology leader for more than 40 years, our mission at Boston Scientific (NYSE: BSX) is to transform lives through innovative medical solutions that improve the health of patients. If you’re looking to truly make a difference to people both around the world and around the corner, there’s no better place to make it happen.

Key Responsibilities
• Demonstrates basic technical expertise on process/product technologies to support design, optimization, validation and troubleshooting of those technologies.
• Under supervisory direction, provides input to Equipment engineering or external equipment/tooling or material vendors in the selection, design & development of new (or upgrades to existing) equipment, tooling and materials.
• Demonstrates good working knowledge of DFSS/DMAIC tools and, with mentor assistance, applies these tools in the characterization, optimization and troubleshooting of process equipment and technology performance.
• Supports the development and execution of experimentation and testing to enable characterisation, optimization and troubleshooting of processes and equipment. and summarizes, analyses and draws conclusions from test results leading to effective technical resolution.
• Supports the introduction of new processes, equipment and materials including installation, calibration, EHS assessment debug, and all associated process and quality system documentation requirements including technical and process work instructions.
• With mentor assistance demonstrates good working knowledge and application of Lean methodologies, and process improvement tools to assist in identification and elimination of "waste" process steps and development of efficient, cost effective equipment and processes.
• With mentor assistance demonstrates good working knowledge and application of Process and equipment validation techniques, PFMEA’s, and associated regulatory requirements and applies this knowledge in the support of efficient & timely validation of equipment and processes.
• Under supervision supports the writing and release of process validation documentation including FMEA's, Validation Plans, protocols and reports.
• Under supervision, supports execution and documentation of validation builds, co-ordinates testing of validation units and compiles, analyses and reports on the validation results.
• With mentor assistance ensures compliance with all the regulations governing the quality systems.
• For individual who is assigned calibration engineering role only:
• Provide equipment calibration services necessary to meet company objectives, while assuring measurement traceability to nationally recognized equipment calibration standards and practices.
• Supporting Technical SME for Calibration group and for internal and external Audit
• Competent on Calibration Management System
• Perform calibration functions and sets day to day function for calibration group
• Supports the research and acquisition of new standards and other capital equipment, providing detailed justifications and cost analysis as required.
• Develops technical engineering reports and calibration procedures and trains department technicians on new calibration procedures.
• Provides support and guidance to calibration technicians in performing moderately complex equipment calibrations.
• Supports calibration lab needs regarding such issues as environmental control and new technologies.
• Supports Senior Metrology Engineer and Management to develop the department fiscal year budgets.
• Communicates with the Operations ME function on calibration status.
• Build Quality into all aspects of work by maintaining compliance to all quality requirements
• Drive “Standard Work” in all aspect of Calibration activity.

Requisition ID: 604222

Responsibilities:

Product Quotation Request (PQR)

• Assessing project feasibility through product drawing and B.O.M review. (including built cycle time, avaibility of tools & equipment, non-recurring engineering (NRE) cost etc.)
• Set up the bill of materials (B.O.M) for the request for quotation (RFQ) stage in the Agile system.

Receive Customer Request Form (CRF)

• Establishing System Bill of Materials (B.O.M)
• Maintaining routing in SAP system
• Reviewing and preparing digital harness board drawing
• Reviewing and submitting Technical Queries (TQ)
• Managing project needs with customers, suppliers, and vendors.

FAI Sample Preparation

• Handle all technical queries (TQ) related to sample build.
• Ensure readiness of OI/CP/FMEA/General standards in the Agile system.
• Generate Control Plans (CP) and conduct Failure Mode Effect Analysis (FMEA)
• Prepare and review First Article Inspection Reports (FAIR) for customer approval
• Implement engineering changes (ECR/ECN) after sample preparation.

Others

• Provide regular reports on engineering-related key performance indicators (KPIs) and other KPIs assigned by Management on a weekly and monthly basis to both the departmental Head of Department (HOD) and the corporate office.
• Fulfill any additional responsibilities as directed by the HOD or direct superior as needed.
• Take the initiative to launch improvement projects or activities that aim to expedite engineering tasks.

Requirements:

• Applicants must possess at least a degree in Electrical & Electronic/Mechanical field of qualification.
• Fresh graduates or individuals with working experience in the Manufacturing Industry are strongly encouraged to apply.
• Proficiency in Google, MS Office, and AutoCAD is mandatory.
• Applicants with programming skills, particularly in JavaScript, HTML, and Python, are highly encouraged to apply.
• Candidates should demonstrate responsibility, dedication, and the ability to work under tight schedules with minimal supervision.
• Candidates who are fluent in Mandarin are preferred because the role requires candidates to interact with Mandarin-speaker

Brooks is a leading provider of automation solutions with over 40 years of experience in the semiconductor industry, offering precision robotics, integrated automation systems, and contamination control solutions that empower chip manufacturers worldwide. Our product portfolio includes a range of automation solutions, including robots, vacuum systems, and atmospheric robots for semiconductor manufacturing ( you looking for a place where you can be part of a transformation? Join us at Brooks Automation and be a part of a dynamic organization that is shaping the future of technology.

Manufacturing Engineer

Job Description
About the Role:

Brooks Automation is a global leader in automation solutions, serving advanced technology markets such as semiconductor manufacturing. Our new greenfield manufacturing site in Johor Bahru represents our commitment to innovation, excellence, and local talent development.

We are seeking an experienced, skilled and innovative Manufacturing Engineer to join our dynamic team at our Johor Bahru facility. In this pivotal role, you will design, optimize, and validate manufacturing processes and procedures to ensure operational efficiency, product quality, and scalable production. Collaborate closely with cross-functional teams, including design and transfer engineering, you will drive the seamless transition of products from R&D or transfer sites into full-scale production. Your expertise will be instrumental in enhancing assembly, testing, and automation workflows while proactively advising on design-for-manufacturability (DFM) principles to improve product viability.

The ideal candidate will possess a strong technical foundation in advanced manufacturing practices, including robotics and precision technologies, paired with exceptional problem-solving and communication skills. A demonstrated ability to balance hands-on engineering with strategic process improvements will be critical to success in this role.

Work Location: Onsite - Johor Bahru

Key Responsibilities:

• Manufacturing Line Readiness & Scalability: Lead end-to-end production line setup, including procurement, installation, and validation of fixtures, tooling, and equipment under copy-exact principles to ensure global replication. Maintain "golden unit" standards with rigorous documentation (BOMs, Work Instructions) and comply with change control. Conduct manufacturing readiness reviews, optimize capacity models, and collaborate with Supplier Development, Quality, and cross-functional teams (IT, Facilities, Supply Chain, Warehouse) to align infrastructure (cleanrooms, material flow, MRP setup) for rapid scale-up.
• Process Optimization & Lean Manufacturing: Drive efficiency, yield, and quality through Lean methodologies (5S, SMED, Value Stream Mapping), error-proofing (poka-yoke), and precision tooling design. Reduce cycle times, resolve defects via structured problem-solving (8D, DMAIC), and implement PFMEA to mitigate risks. Optimize labor allocation, reduce Cost of Quality (CoQ), and execute cost-saving initiatives through waste reduction.
• Quality Assurance & Compliance: Validate processes using Gauge R&R, enforce Process Quality Plans (PQP) for CTQ characteristics, and conduct root cause analysis (RCA) with closed-loop CAPA. Ensure compliance with SEMI/safety standards, statistical process control (SPC), and in-line metrology inspections. Supports and drive towards successful internal/external audits (e.g. cross-sites, customer, ISO audits).
• Automation & Advanced Manufacturing: Integrate robotics, PLC systems, and automated solutions into assembly, testing, and material handling. Validate reliability (GR&R) and compliance while optimizing throughput.
• Cross-Functional Collaboration: Partner with R&D on design-for-manufacturability (DFM) and tolerance analysis, support NPI activities (pilot validation, workstation readiness), and troubleshoot critical production issues (equipment failures, test bottlenecks). Develop training programs for copy-exact compliance, covering assembly practices, and defect recognition.
• Cost & Operational Excellence: Analyze manufacturing costs, establish labor & machine time standards, and recommend tooling/process upgrades. Lead small-to-large projects, ensuring on-time delivery within budget, while maintaining Test & Measurement Equipment (TME) calibration standards and managing preventive maintenance programs to minimize downtime.
• Additional Responsibilities: Support ad-hoc business needs and lifecycle optimization across product phases. Undertake other duties as assigned, to support evolving business needs.
  
  

• Bachelor’s degree in Mechatronics, Mechanical Engineering, Electrical Engineering, or a related technical field; Master’s degree preferred.
• 5+ years of manufacturing engineering experience in Robotics, Automated Machinery, or Industrial Equipment (OEM / EMS environments).
• Understanding operational and technical aspects of semiconductor manufacturing equipment (e.g. wafer handling systems, robotics, FOUP contamination control) is advantageous.
• Proficiency in statistical analysis tools (e.g. Minitab, JMP) and methodologies (SPC, DOE) for process optimization, yield enhancement, and quality control in equipment / machinery manufacturing environment.
• CAD skills (e.g. AutoCAD, SolidWorks) for equipment component design, manufacturing layout, and material flow optimization.
• Knowledge of ISO, SEMI, and safety/regulatory standards for equipment manufacturing compliance.
• Experience with Lean methodologies (5S, SMED) and continuous improvement frameworks (DMAIC, 8D).
• Familiarity with automated systems (PLC, robotic arms) and validation protocols (GR&R).
• Strong problem-solving and analytical abilities to troubleshoot equipment and process inefficiencies.
• Excellent communication and project management skills for cross-functional collaboration in fast-paced environments.
• Agile mindset with the ability to prioritize tasks and manage competing deadlines.
• Preferable qualifications: Six Sigma certification (Green Belt/Black Belt); Hands-on experience with Industry 4.0 technologies (IoT, predictive maintenance).
  
  

A manufacturing engineer designs, develops, and optimizes manufacturing processes and systems to produce goods efficiently and effectively

• Intermediate skill in Microsoft Excel and Word (Excel formulas).
• Have some interest to learn about engineering tasks and projects.
• Have some interest in industrial 0 and IOT(internet of things.
• Create a creative way to display/present data if needed.
• Able to support when required.

• A minimum degree in Electrical & Electronics is an added advantage.
• Fresh graduates or those with working experience in the Manufacturing Industry are encouraged to apply.
• Knowledge of MS Office and AutoCAD is compulsory.
• Responsible for preparing FAI.
• Supervise daily engineering department activities.
• Solve NPI / Production issue.
• Candidates who are fluent in Mandarin are preferred because the role requires candidates to interact with Mandarin speakers.

No matter the location, or the role, every BizLink employee shares one mission: Make interconnection easier to improve the quality of life and turn customers' innovative ideas into reality.

You can always contact us on

Brooks is a leading provider of automation solutions with over 40 years of experience in the semiconductor industry, offering precision robotics, integrated automation systems, and contamination control solutions that empower chip manufacturers worldwide. Our product portfolio includes a range of automation solutions, including robots, vacuum systems, and atmospheric robots for semiconductor manufacturing ( ).

Are you looking for a place where you can be part of a transformation? Join us at Brooks Automation and be a part of a dynamic organization that is shaping the future of technology.

About the Role:

Brooks Automation is a global leader in automation solutions, serving advanced technology markets such as semiconductor manufacturing. Our new greenfield manufacturing site in Johor Bahru represents our commitment to innovation, excellence, and local talent development.

We are seeking an experienced, skilled, and innovative Manufacturing Engineer to join our dynamic team at our Johor Bahru facility. In this pivotal role, you will design, optimize, and validate manufacturing processes and procedures to ensure operational efficiency, product quality, and scalable production. Collaborate closely with cross-functional teams, including design and transfer engineering, to drive the seamless transition of products from R&D or transfer sites into full-scale production. Your expertise will be instrumental in enhancing assembly, testing, and automation workflows while proactively advising on design-for-manufacturability (DFM) principles to improve product viability.

The ideal candidate will possess a strong technical foundation in advanced manufacturing practices, including robotics and precision technologies, paired with exceptional problem-solving and communication skills. A demonstrated ability to balance hands-on engineering with strategic process improvements will be critical to success in this role.

Work Location: Onsite - Johor Bahru

Key Responsibilities:

• Manufacturing Line Readiness & Scalability: Lead end-to-end production line setup, including procurement, installation, and validation of fixtures, tooling, and equipment under copy-exact principles to ensure global replication. Maintain "golden unit" standards with rigorous documentation (BOMs, Work Instructions) and comply with change control. Conduct manufacturing readiness reviews, optimize capacity models, and collaborate with Supplier Development, Quality, and cross-functional teams (IT, Facilities, Supply Chain, Warehouse) to align infrastructure (cleanrooms, material flow, MRP setup) for rapid scale-up.
• Process Optimization & Lean Manufacturing: Drive efficiency, yield, and quality through Lean methodologies (5S, SMED, Value Stream Mapping), error-proofing (poka-yoke), and precision tooling design. Reduce cycle times, resolve defects via structured problem-solving (8D, DMAIC), and implement PFMEA to mitigate risks. Optimize labor allocation, reduce Cost of Quality (CoQ), and execute cost-saving initiatives through waste reduction.
• Quality Assurance & Compliance: Validate processes using Gauge R&R, enforce Process Quality Plans (PQP) for CTQ characteristics, and conduct root cause analysis (RCA) with closed-loop CAPA. Ensure compliance with SEMI/safety standards, statistical process control (SPC), and in-line metrology inspections. Support and drive successful internal/external audits (e.g., cross-sites, customer, ISO audits).
• Automation & Advanced Manufacturing: Integrate robotics, PLC systems, and automated solutions into assembly, testing, and material handling. Validate reliability (GR&R) and compliance while optimizing throughput.
• Cross-Functional Collaboration: Partner with R&D on design-for-manufacturability (DFM) and tolerance analysis, support NPI activities (pilot validation, workstation readiness), and troubleshoot critical production issues (equipment failures, test bottlenecks). Develop training programs for copy-exact compliance, covering assembly practices and defect recognition.
• Cost & Operational Excellence: Analyze manufacturing costs, establish labor & machine time standards, and recommend tooling/process upgrades. Lead projects ensuring on-time delivery within budget, while maintaining TME calibration standards and managing preventive maintenance to minimize downtime.
• Additional Responsibilities: Support ad-hoc business needs and lifecycle optimization across product phases. Undertake other duties as assigned to support evolving business needs.

Qualifications & Competencies:

• Bachelor’s degree in Mechatronics, Mechanical Engineering, Electrical Engineering, or a related technical field; Master’s degree preferred.
• 5+ years of manufacturing engineering experience in Robotics, Automated Machinery, or Industrial Equipment (OEM / EMS environments).
• Understanding operational and technical aspects of semiconductor manufacturing equipment (e.g., wafer handling systems, robotics, FOUP contamination control) is advantageous.
• Proficiency in statistical analysis tools (e.g., Minitab, JMP) and methodologies (SPC, DOE) for process optimization, yield enhancement, and quality control in equipment/machinery manufacturing environment.
• CAD skills (e.g., AutoCAD, SolidWorks) for equipment component design, manufacturing layout, and material flow optimization.
• Knowledge of ISO, SEMI, and safety/regulatory standards for equipment manufacturing compliance.
• Experience with Lean methodologies (5S, SMED) and continuous improvement frameworks (DMAIC, 8D).
• Familiarity with automated systems (PLC, robotic arms) and validation protocols (GR&R).
• Strong problem-solving and analytical abilities to troubleshoot equipment and process inefficiencies.
• Excellent communication and project management skills for cross-functional collaboration in fast-paced environments.
• Agile mindset with the ability to prioritize tasks and manage competing deadlines.
• Preferable qualifications: Six Sigma certification (Green Belt/Black Belt); Hands-on experience with Industry 4.0 technologies (IoT, predictive maintenance).

#LI-MV1

#LI-Onsite

Work Location & Flexibility: At Brooks, we aim to foster a collaborative and engaging environment while offering flexibility where possible. Work arrangements may include a mix of in-office and remote work, depending on the nature of the role and business needs. Specific expectations will be shared during the interview process.

Brooks is committed to fostering a diverse and inclusive workplace and proudly serves as an equal-opportunity employer. We welcome all qualified applicants regardless of race, color, religion, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, or any other legally protected characteristics.

Diversity enhances our innovative capabilities and strengthens our ability to serve our customers and communities effectively. At Brooks Automation, we celebrate the unique experiences and perspectives each individual brings, believing they are essential to our collective success. Join us in building a workplace where every team member is valued and can thrive.

For applicants with disabilities requiring accommodations, don't hesitate to get in touch with or call +1 ( to discuss your needs.

Review EEO Law & EEO Statement.

• Develop system interface
• Need to be proficient in at least 3 programming language, which is Javascrip, HTLM and C++ language
• Intermediate skill in microsoft excel and word (excel formula)
• Have some interest to learn about engineering tasks and projects
• have some interest about industrial 4.0 and IOT(internet of thing
• Creative way to display/present data if needed.
• Able to support when required
  

• Minimum degree in Electrical & Electronic is added advantage
• Fresh graduate or with working experience in Manufacturing Industry are encouraged to apply.
• Knowledge in MS Office and AutoCAD is compulsory.
• Responsible in preparing FAI
• Supervise daily engineering department activites
• Solve NPI / Production issue
• Candidates who are fluent in Mandarin are preferred because the role requires candidates to interact with Mandarin-speaker

We are a public company with strong resources, but operate in a way where each individual counts and where you have a chance to personally make a mark on the positive development of the company. You will interface with our global top management of the company and have an opportunity to be part of a team eager to succeed. We are always looking for positive business relationships and win-win situations and have many decades-long supplier partnerships with global leaders in the various industries we participate in. At BizLink, integrity is paramount. You will be involved in a multitude of new and exciting business areas, as we eagerly search out opportunities in what is new and what is developing, such as electric vehicles, energy storage and renewable energy. Your positive contributions will be rewarded.

BizLink offers competitive compensation and benefits, including a bonus plan linked toperformance.

We are a U.S.-headquartered and vertically integrated manufacturer of interconnect products (connectors, wire, cable assemblies, wiring harnesses, fiber optic devices, etc.) with manufacturing in China, Malaysia, Mexico and the U.S. We were founded in 1996, are a public company and serve customers in industrial, motor vehicle, medical device, IT, Consumer Electronics, Renewable Energy and other markets. Some of our key customers are Dell, HP, Microsoft, GE Healthcare, Tesla, and Polaris.

Apply now! Send resume to:

Equal Opportunity Employer
All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, sexualorientation, gender identity, national origin, protected veteran status, or on the basis of disability.

1. Develops manufacturing solutions and provides services that are high-quality, cost-appropriate, and satisfy the customer's requirements.
2. Utilizes appropriate tools and equipment to perform necessary work including creation, analysis, and verification.
3. Demonstrates a clear, discipline-specific understanding of the full Plexus manufacturing processes, product requirements, and specifications as it applies to their role.
4. Successfully executes responsibilities in adherence to Plexus' manufacturing processes.
5. Produces comprehensive project documentation based on the needs of the project and in accordance with the quality and change management procedures and guidelines, as it applies to their role.

1. A minimum of a Bachelor's degree in Engineering or Science is required; a Bachelor's degree in Engineering or higher is preferred.
2. Less than one (1) year of related experience is required; one (1) or more years of related experience is preferred.
3. An equivalent combination of education and experience sufficient to successfully perform the key job accountabilities may be considered.

1. Intermediate computer skills.
2. Intermediate decision making and problem-solving skills.
3. Intermediate verbal and written communication skills.
4. Strong analytical and statistical analysis skills; statistical process control software skills.
5. Proactive and ability to work in a cross-discipline team environment.
6. Understand structured design.
7. Ability to develop good working relationships with team members and customers.
8. Lab tool/test/measurement equipment experience preferred.

1. N/A

1. N/A

Brooks is a leading provider of automation solutions with over 40 years of experience in the semiconductor industry, offering precision robotics, integrated automation systems, and contamination control solutions that empower chip manufacturers worldwide. Our product portfolio includes a range of automation solutions, including robots, vacuum systems, and atmospheric robots for semiconductor manufacturing( ).

Are you looking for a place where you can be part of a transformation? Join us at Brooks Automation and be a part of a dynamic organization that is shaping the future of technology.

Brooks is a leading provider of automation solutions with over 40 years of experience in the semiconductor industry, offering precision robotics, integrated automation systems, and contamination control solutions that empower chip manufacturers worldwide. Our product portfolio includes a range of automation solutions, including robots, vacuum systems, and atmospheric robots for semiconductor manufacturing( ).

Are you looking for a place where you can be part of a transformation? Join us at Brooks Automation and be a part of a dynamic organization that is shaping the future of technology.

About the Role:

Brooks Automation is a global leader in automation solutions, serving advanced technology markets such as semiconductor manufacturing. Our new greenfield manufacturing site in Johor Bahru represents our commitment to innovation, excellence, and local talent development.

We are seeking an experienced, skilled and innovativeManufacturing Engineer to join our dynamic team at our Johor Bahru facility. In this pivotal role, you will design, optimize, and validate manufacturing processes and procedures to ensure operational efficiency, product quality, and scalable production. Collaborate closely with cross-functional teams, including design and transfer engineering, you will drive the seamless transition of products from R&D or transfer sites into full-scale production. Your expertise will be instrumental in enhancing assembly, testing, and automation workflows while proactively advising on design-for-manufacturability (DFM) principles to improve product viability.

The ideal candidate will possess a strong technical foundation in advanced manufacturing practices, including robotics and precision technologies, paired with exceptional problem-solving and communication skills. A demonstrated ability to balance hands-on engineering with strategic process improvements will be critical to success in this role.

Work Location: Onsite - Johor Bahru

Key Responsibilities:

• Manufacturing Line Readiness & Scalability: Lead end-to-end production line setup, including procurement, installation, and validation of fixtures, tooling, and equipment under copy-exact principles to ensure global replication. Maintain "golden unit" standards with rigorous documentation (BOMs, Work Instructions) and comply with change control. Conduct manufacturing readiness reviews, optimize capacity models, and collaborate with Supplier Development, Quality, and cross-functional teams (IT, Facilities, Supply Chain, Warehouse) to align infrastructure (cleanrooms, material flow, MRP setup) for rapid scale-up.
• Process Optimization & Lean Manufacturing: Drive efficiency, yield, and quality through Lean methodologies (5S, SMED, Value Stream Mapping), error-proofing (poka-yoke), and precision tooling design. Reduce cycle times, resolve defects via structured problem-solving (8D, DMAIC), and implement PFMEA to mitigate risks. Optimize labor allocation, reduce Cost of Quality (CoQ), and execute cost-saving initiatives through waste reduction.
• Quality Assurance & Compliance: Validate processes using Gauge R&R, enforce Process Quality Plans (PQP) for CTQ characteristics, and conduct root cause analysis (RCA) with closed-loop CAPA. Ensure compliance with SEMI/safety standards, statistical process control (SPC), and in-line metrology inspections. Supports and drive towards successful internal/external audits (e.g. cross-sites, customer, ISO audits).
• Automation & Advanced Manufacturing: Integrate robotics, PLC systems, and automated solutions into assembly, testing, and material handling. Validate reliability (GR&R) and compliance while optimizing throughput.
• Cross-Functional Collaboration: Partner with R&D on design-for-manufacturability (DFM) and tolerance analysis, support NPI activities (pilot validation, workstation readiness), and troubleshoot critical production issues (equipment failures, test bottlenecks). Develop training programs for copy-exact compliance, covering assembly practices, and defect recognition.
• Cost & Operational Excellence: Analyze manufacturing costs, establish labor & machine time standards, and recommend tooling/process upgrades. Lead small-to-large projects, ensuring on-time delivery within budget, while maintaining Test & Measurement Equipment (TME) calibration standards and managing preventive maintenance programs to minimize downtime.
• Additional Responsibilities: Support ad-hoc business needs and lifecycle optimization across product phases. Undertake other duties as assigned, to support evolving business needs.

Qualifications & Competencies:

• Bachelor’s degree in Mechatronics, Mechanical Engineering, Electrical Engineering, or a related technical field; Master’s degree preferred.
• 5+ years of manufacturing engineering experience in Robotics, Automated Machinery, or Industrial Equipment (OEM / EMS environments).
• Understanding operational and technical aspects of semiconductor manufacturing equipment (e.g. wafer handling systems, robotics, FOUP contamination control) is advantageous.
• Proficiency in statistical analysis tools (e.g. Minitab, JMP) and methodologies (SPC, DOE) for process optimization, yield enhancement, and quality control in equipment / machinery manufacturing environment.
• CAD skills (e.g. AutoCAD, SolidWorks) for equipment component design, manufacturing layout, and material flow optimization.
• Knowledge of ISO, SEMI, and safety/regulatory standards for equipment manufacturing compliance.
• Experience with Lean methodologies (5S, SMED) and continuous improvement frameworks (DMAIC, 8D).
• Familiarity with automated systems (PLC, robotic arms) and validation protocols (GR&R).
• Strong problem-solving and analytical abilities to troubleshoot equipment and process inefficiencies.
• Excellent communication and project management skills for cross-functional collaboration in fast-paced environments.
• Agile mindset with the ability to prioritize tasks and manage competing deadlines.
• Preferable qualifications: Six Sigma certification (Green Belt/Black Belt); Hands-on experience with Industry 4.0 technologies (IoT, predictive maintenance).

#LI-MV1

#LI-Onsite

Work Location & Flexibility
At Brooks, we aim to foster a collaborative and engaging environment while offering flexibility where possible. Work arrangements may include a mix of in-office and remote work, depending on the nature of the role and business needs. Specific expectations will be shared during the interview process.

Brooks is committed to fostering a diverse and inclusive workplace and proudly serves as an equal-opportunity employer. We welcome all qualified applicants regardless of race, color, religion, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, or any other legally protected characteristics.

Diversity enhances our innovative capabilities and strengthens our ability to serve our customers and communities effectively. At Brooks Automation, we celebrate the unique experiences and perspectives each individual brings, believing they are essential to our collective success. Join us in building a workplace where every team member is valued and can thrive.

For applicants with disabilities requiring accommodations, don't hesitate to get in touch with or call +1 ( to discuss your needs.

Review EEO Law & EEO Statement .

Requirements

We are seeking a Manufacturing Engineer responsible for the following:

1. Planning and directing the work and progress of operations.
2. Providing guidance to direct reports, including first-line managers and supervisors.
3. Communicating financial results, goal achievements, and key performance indicators to direct reports.
4. Collaborating with senior management and peers on strategy development and execution planning.
5. Achieving operational objectives by contributing to strategic plans, preparing and completing action plans, and implementing standards for production, productivity, quality, and customer service. Resolving related problems.

Application: Apply Here via MyFutureJobs or Apply Here Via Online Form

QR Code for Online Employment Application Form