849 Laboratory Analyst Position jobs in Malaysia

RESPONSIBILITIES:

1. Responsible for conducting sampling and shift physical testing according to standard test methods (national standards as well as in-house test methods) as per the Quality Plan and as per superior instruction.

2. Comply and adhere to the Group's Health & Safety policies, NSCI standards and advisories & OHSAS requirements.

3. Comply with the company's Quality, Energy, Safety, Health and Environment management systems at all times.

4. Ensure the implementation of the laboratory management system in accordance with SAMM MS ISO/IEC 17025.

5. Test raw meal, kiln feed, clinker & cement according to relevant standards as per Quality Plan.

6. Test all raw materials & fuels according to relevant standards as per Quality Plan.

7. Use, operate, troubleshoot, check, verify and clean the Shift Laboratory equipment and tools.

8. Use, operate, troubleshoot, check, verify and clean the raw materials sample preparation room equipment and tools.

9. Inculcate good safety behavior at the workplace by sharing best practices during work and daily toolbox meetings.

10. Execute good laboratory practice such as but not limited to equipment calibration & verification.

11. Communicate with the Manager/Chemist/Engineer/Supervisor with respect to the tests and quality issues.

12. Practice good housekeeping.

13. Follow all instructions given by the superior, company policy and procedure. Follow all instructions given by your superior, as well as company policy and procedures.

REQUIREMENT

1. Sijil Pelajaran Malaysia

2. Minimum 2-3 years working experience in cement manufacturing or heavy industries (laboratory/QC environment)

• Inspect incoming frozen food products to ensure they meet company standards
• Identify and document any discrepancies in product quality
• Work with the production team to identify and address any issues with product quality
• Monitor production processes for compliance with safety and quality standards
• Maintain accurate records of all inspections
• Monitor and control the quality of frozen food products during the production process
• Report any quality issues to the management team

Job Type: Full-time

Pay: RM1, RM2,300.00 per month

Benefits:

• Additional leave

Work Location: In person

*Responsible for overall product quality and meets customer requirements.

*Managing QC tools calibration & able to handle a simple measurement.

*Prepare ,manage reports & keep records

*Assist in ISO 9001 Management & Documentation

*Create quality control checklist

*Strong attention to detail and ability to multitask

Requirement:

*Minimum Diploma or Degree

*Able to communicate in English or Bahasa Malaysia

*Computer literate (Eg Excel, Word)

*Independent ,and willing to grow

Picker and Packer

Tugas utama Processor:

• Menyusun, memproses dan mengendalikan barang / stok ikut prosedur.

• Memastikan barang yang masuk & keluar dicatat dengan betul.

• Memeriksa kualiti barang sebelum dihantar.

• Menggunakan sistem atau mesin mudah (jika ada) untuk rekod barang.

• Membantu dalam aktiviti operasi harian seperti memindahkan barang, membungkus, atau menyediakan untuk penghantaran.

Ringkasnya: Processor ni kerja pemprosesan barang – lebih kepada urus stok, semak, susun dan pastikan semua ikut prosedur.

Job Types: Full-time, Contract

Contract length: 6 months

Pay: RM1, RM1,900.00 per month

Benefits:

• Health insurance
• Meal allowance

Work Location: In person

Responsibilities:

• Perform Incoming QC (IQC) inspection on raw materials and purchased components.
• Carry out Outgoing QC (OQC) inspection to ensure finished parts meet dimensional and visual requirements before shipment.
• Use precision measurement tools (e.g., caliper, micrometer, height gauge) to check part dimensions.
• Document inspection results and report any non-conformities.
• Work closely with production and QA team to identify and resolve quality issues.
• Support preparation of QC reports and maintain proper records.
• Ensure compliance with internal quality procedures and customer specifications.

Requirements:

• Minimum 1 year of experience in quality control in a CNC machining environment.
• Knowledge of IQC and OQC procedures is required.
• Able to read and understand technical drawings and basic GD&T.
• Familiar with measuring instruments and basic inspection methods.
• Responsible, detail-oriented, and a good team player.
• Able to work under minimal supervision and meet inspection deadlines.

Added Advantage:

• Experience in ISO 9001 environments.
• Familiarity with basic documentation for traceability and defect reporting.

Job Type: Full-time

Pay: RM2, RM3,200.00 per month

Benefits:

• Free parking
• Health insurance
• Opportunities for promotion
• Professional development

Application Question(s):

• How long is your termination notice ?

Experience:

• CNC Machining Industry: 1 year (Preferred)
• QA/QC: 1 year (Required)

Work Location: In person

• Preferably degree/diploma related with chemistry.
• Inspection and Testing:Performing inspections, audits, and tests on products and processes to verify compliance with quality requirements.
• Defect Identification:Identifying defects or deviations from standards and documenting findings.
• Corrective Action:Implementing and monitoring corrective actions to address identified quality issues.
• Data Analysis:Analyzing inspection data and trends to identify areas for improvement and maintain quality control.
• Process Monitoring:Monitoring production operations to ensure compliance with standards and best practices.
• Reporting:Preparing and presenting inspection reports, including findings and recommendations.

Job Type: Internship

Contract length: 6 months

Pay: RM500.00 per month

Work Location: In person

Responsibility

• Assist in checking and inspecting printed labels/products to ensure they meet quality standards.
• Support the QC team in monitoring production processes and identifying defects.
• Record and report inspection results, highlighting any inconsistencies.
• Help prepare documentation related to quality checks and compliance.
• Work closely with the production team to ensure smooth operations.

Requirements

• Diploma/Degree student or fresh graduate in Manufacturing, or related field (others welcome if detail-oriented).
• Strong attention to detail and accuracy.
• Basic understanding of quality checks or production processes is an advantage.
• Organized, responsible, and eager to learn.
• Able to work independently as well as in a team.

Duration

• Preferably 6 months

Job Type: Internship

Pay: From RM700.00 per month

Benefits:

• Opportunities for promotion

Application Question(s):

• Do you have prior internship or part-time work experience?
• Do you have at least two year of experience working with at least one of the listed? (MS Office, Google Workspace, Canva, Adobe Illustrator/Photoshop, Social Media Marketing)

Language:

• English/Chinese other than Malay (Preferred)

Work Location: In person

QUALITY CONTROL

1) Inspects garments, such as men's shirts, during manufacturing operations to determine number of defects per worker and reasons for rejects by examiners: Cuts swatches from bolts of fabric to determine variations in dye lot shades.

2) Counts number of pattern parts and lays of cloth prior to cutting to ensure accuracy of cutting operation with minimum waste.

3) Counts number of stitches per inch during sewing operation to detect inconsistencies in sewing machine settings.

4) Tests strength of collar-stay fusion, using tensiometer.

5) Folds collars in half to detect unevenness of attachment.

6) Examines garment and parts for defects, such as unfinished raw edges, broken buttons or hooks, uneven stripes or plaids, puckers in seams, loose threads or stitches, or incorrect packaging assortment.

7) Records number and type of defects for each worker.

Job Type: Full-time

Pay: RM1, RM2,000.00 per month

Schedule:

Early shift

Evening shift

Rotational shift

Supplemental Pay:

Overtime pay

Job Types: Full-time, Fresh graduate

Pay: RM1, RM1,900.00 per month

Benefits:

• Free parking
• Maternity leave
• Opportunities for promotion
• Parental leave
• Professional development

Work Location: In person

Requirements:

1. Minimum SPM qualification

2. Male

3. Preferably lives in Rawang

4. Able to stand work pressure

5. Can work in shift

6. Can calculate, read in Malay and English

Job Responsibilities:-

1. Daily inspection according to SOP/Control Plan

2. Record daily rejection

3. Data collection and recording time during sample making and pilot production

4. To report defect and reject data analysis to superior

5. To highlight to respective operator, senior operator, supervisors or others on any non-conformance during production activities/SOP

6. To maintain/report/improve on 5S

7. Follow all regulation as required by the company

8. Any other duties instructed by superior from time to time

Job Type: Full-time

Pay: RM1, RM1,800.00 per month

Benefits:

• Free parking

Education:

• Diploma/Advanced Diploma (Preferred)

Work Location: In person