737 Hardware Design jobs in Malaysia

Req ID:

Remote Position: No

Region: Asia

Country: Malaysia

State/Province: Bayan Lepas

City: Penang

Summary
The Senior Lead Engineer, Electrical Design develops new electrical systems/circuits for various applications. Research system ideas and draw up plans for these systems, and capture them in schematics and system specifications. Test, simulate, validate and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing of the electrical systems they have designed.

The Senior Lead Engineer, Electrical Design works in cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations.

Detailed Description

Detailed Description
The successful candidate will be a self-starter who likes to take responsibility and works best with little supervision. Likes to perform a variety of tasks and have the ability to handle multiple priorities and has previously performed in a similar position. This is a 'hands-on' role requiring a strong technical background and product development experience.
Duties

• Identify technical issues, troubleshoot and resolve them by coordinating with R&D, Manufacturing and Field teams
• Participate in customer technical meetings and prepare training programs for internal subordinates.
• Hardware validation of Networking, Storage, Server products against customer's infield issues, requirements and Mfg. issues during NPI or RMA
• System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval.
• Qualify alternative components for compatibility, cost effectiveness and benchmarking
• Support Manufacturing Engineering and Test Engineers on trouble shooting and resolving technical issues and root cause analysis
• Work with software teams to identify root cause of system failure
• Ability to install software such as Linux based Operating Systems, ONIE, BIOS, BMC, SES
• Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum

Knowledge/Skills/Competencies

Candidates should have 8+ years' experience in either Network, Storage or Server products.

• Strong electrical design and debug skills required
• Familiar with PCIe, NVMe, SAS, SATA, I2C, SPI, DDR buses
• SDRAM timing and integrity analysis for clocks, strobes, S&H, Power bounce, temp stability
• Hands-on design knowledge of latest peripheral chipsets for Gigabit Ethernet, SCSI, SATA, SAS, USB, Ethernet, & PCI cards etc.
• High performance RISC / X86 CPUs and architecture including Intel, AMD, MRVL
• Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum analyzer
• Qualify alternative components for compatibility, cost effectiveness and benchmarking
• System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval.
• Work with software teams to identify root cause of system failure
• Working knowledge of windows & Linux configuration, installation procedure, network configuration, driver configuration etc.

• Working knowledge of Diag, ONIE, BIOS, BMC, Linux and Windows operating systems

• Knowledge of the following would be desirable:

• Experience of working in medium sized multidisciplinary development teams

• Ethernet Switches, Server, Storage products
• Orcad Schematics & Allegro PCB layout tools

Physical Demands

• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.

Typical Experience

• 4 to 6 years in a similar role or industry.

Typical Education

Bachelor degree or consideration of an equivalent combination of education and experience.

Educational Requirements may vary by Geography

Notes

This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

Company Overview
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

About The Job

Pentamaster is a leader and innovative automation technology solutions provider with more than 30 years extensive experience to multinational manufacturers such as semiconductor, telecommunications, consumer electronics, automotive sectors, etc.

Pentamaster group's businesses are spanning across Asia Pacific, North America, Europe and Middle East with rapid business growth and expansion in automation industry.

We provide customized automation technology solutions.

We are a big and diverse community with a variety of skills. Comprising of 6 different offices including Malaysia, Japan, USA etc.

Key Experiences:

1. To design and develop product that meet customer requirement.
2. Mainly focus on the Analog and Digital Design.

What You'll Do:

1. Turn electronic design into schematic, PCB layout, and finally working product that meet product specification.
2. Research, Design, Prototype build, Testing and Debugging, Product qualification.
3. Prepare technical document for design review and project update.
4. Involve in other technical related work as directed by upper management or required by the company.

Qualification:

1. PhD or Master or Bachelor of Electrical and/or Electronics Engineering or equivalent.

Experience:

1. Must have strong knowledge in Electronics fundamental.
2. Must have experience in electronic design.
3. Knowledge in schematic, PCB layout and circuit board troubleshooting.
4. Hand-on in electronic or hardware design experience in university/college or current work.
5. For Senior position, minimum 5 years in relevant field.
6. For Junior position, minimum 2 years in relevant field. Fresh graduate is encourage to apply.
7. Hand-on Design Experience in Digital Multimeter, Analog Data Acquisition and Source & Measurement Unit (SMU) will be added advantage.

Skill:

1. Able to turn electronic design into schematic, PCB layout, debug and final working product.
2. Able to performance test and measurement, and soldering.
3. Ability to communicate with all levels.
4. Able to work independently, good analytical and problem solving skill.
5. Must be creative, innovative, resourceful, self-discipline and eager to learn new thing.

More Reasons To Come Work With Us:

1. Established in 1991, we are a market-proven, well-established company.

2. Personal development, learning and growth is integrated in our culture.

We invest in the personal growth of each staff by opportunities to attend courses, joining conferences, and other learning opportunities.

1. We have regular team (building) events on a monthly basis

You are our needed talent.

Join us, to be the leader and world-class automation solutions provider in the global market.

Embark on a Challenging & Rewarding Career

Proudly recognized with "Best Employer Award 2023" by EPF, we believe in empowering our employees to reach their full potential through ongoing development and career advancement opportunities. Discover the career paths available and start your journey with us today.

Benefits with Pentamaster

Bonus & Performance Incentive

Other Rewards and Gift

Flexible Working Hours

Attractive Salary Package

Group Insurance Coverage

Medical Benefits

Dental Benefits

Long Service Award

In-house Child Care Centre

Hardware Design Engineer
MAIN RESPONSIBILITIES AND DUTIES
Conducting market research to identify customer needs and trends for ATE including advanced packaging tests system.
Defining the product vision and strategy.
Prioritizing features based on customer feedback and business impact.
Creating and managing product roadmaps.
Work with engineers, customer, cross-functional team and supplier to ensure timely delivery of projects.
Design ATE hardware, electronic circuit, PCB architecture and layout based on specification and test plan from customer requirement.
Monitor, evaluate, analyze and optimize test system to ensure optimal manufacturing yield.
Perform evaluation, research, experiment, prototyping, proof of concept and data analysis to determine cause effect of issue and to provide solution.
Manage supply chain for standard part purchase, equipment, system and accessories.
Responsible for overall projects, planning, design, development, buyoff and continuous improvement.
ATE System Troubleshooting and identify the root cause.
JOB REQUIREMENTS
PCB design software such as Altium, Cadence, Kicad or equivalent.
Analog and high-speed digital circuit PCB design.
PCB troubleshooting and root cause identification for design improvement.
Knowledge of circuit analysis and electronic design.
Strong in verbal and written communication skill.
Ability to collaborate with cross-functional technical teams.
Good analytical, decision making and problem-solving skills.
Motivated, growth mindset and with positive attitude.

Req ID:

Remote Position: No

Region: Asia 

Country: Malaysia 

State/Province: Bayan Lepas 

City:  Penang

General Overview

Functional Area:  Engineering

Career Stream:Design Engineering Hardware    

SAP Short Name:  ENG-ENG-DHW

Job Level:  Level 07

IC/MGR: Individual Contributor

Direct/Indirect Indicator:  Indirect

Summary

The Test Engineer, Hardware Design works with cross functional team of designers, customers, manufacturing engineeringand project leadership to ensure robust and high quality product development. Provide support throughout the productsustaining process from Development exit milestone to the EOL/EOS of products.

The successful candidate will be a self-starter who likes to take responsibility and works best with little supervision. Likesto perform a variety of tasks and has the ability to handle multiple priorities and has previously performed in a similarposition. This is a 'hands-on' role requiring a strong technical background in EE , product testing and manufacturing.

Detailed Description

Performs tasks such as, but not limited to, the following:

- Perform Hardware validation tests including but not limited to DVT (Design Validation Test), SPIT (Signal, Power,Integrity & Timing), Thermal, Reliability, Functional, Environmental, EMI/EMC, Burn-In and work with design engineeringto resolve issues found during the testing process

Prepare test plans and execute them for qualifying alternative components and design changes

• Able to create test scripts using Python or other scripting language
• Proficient in using various test and measurement equipment including but not limited to Meters, Oscilloscope,Impedance analyzer, Power meter, Signal analyzer, Spectrum analyzer, Bus analyzers, Thermal Chamber
• Able to do basic soldering
• Able to install software such as Linux based Operating Systems and embedded firmware such as, ONIE, BIOS, BMC,SES, CPLD/FPGA images
• Liaison with suppliers, customers, contractors, and other internal teams.
• Update Bill of Material
• Create Test reports and documentation such as PCNs, SOPs
• Flexible to support admin tasks such as Lab. Management, Shipping, Raising PR/PO, Inventory checking (DO/GR)

Knowledge/Skills/Competencies

Refer to technical skills below

Physical Demands

• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbersand other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequentlyrequired.
• Occasional travel may be required.

Typical Experience

• 1 to 4 years of related experienc;Experience in similar job roles

Typical Education

Bachelor degree or consideration of an equivalent combination of education and experience.

Educational Requirements may vary by Geography

Notes

This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Job Segment:
Thermal Engineering, Testing, Design Engineer, Manufacturing Engineer, Data Entry, Engineering, Technology, Administrative

We're
#hiring
Join us as a
Hardware Design Engineer
at
Kontron Asia Pacific Design
– exciting career growth awaits you.

Detailed Description

The successful candidate will be a self-starter who likes to take responsibility and works best with little supervision. Likes to perform a variety of tasks and have the ability to handle multiple priorities and has previously performed in a similar position. This is a 'hands-on' role requiring a strong technical background and product development experience.

Duties

• Identify technical issues, troubleshoot and resolve them by coordinating with R&D, Manufacturing and Field teams
• Participate in customer technical meetings and prepare training programs for internal subordinates.
• Hardware validation of Networking, Storage, Server products against customer's infield issues, requirements and Mfg. issues during NPI or RMA
• System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval.
• Qualify alternative components for compatibility, cost effectiveness and benchmarking
• Support Manufacturing Engineering and Test Engineers on trouble shooting and resolving technical issues and root cause analysis
• Work with software teams to identify root cause of system failure
• Ability to install software such as Linux based Operating Systems, ONIE, BIOS, BMC, SES
• Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum

Background

Candidates should have 8+ years' experience in either Network, Storage or Server products.

Candidates should have the following essential qualifications and experience:

• At least BEng. (Hons.) in Electronics or similar
• Strong electrical design and debug skills required
• Familiar with PCIe, NVMe, SAS, SATA, I2C, SPI, DDR buses
• SDRAM timing and integrity analysis for clocks, strobes, S&H, Power bounce, temp stability
• Hands-on design knowledge of latest peripheral chipsets for Gigabit Ethernet, SCSI, SATA, SAS, USB, Ethernet, & PCI cards etc.
• High performance RISC / X86 CPUs and architecture including Intel, AMD, MRVL
• Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum analyzer
• Qualify alternative components for compatibility, cost effectiveness and benchmarking
• System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval.
• Work with software teams to identify root cause of system failure
• Working knowledge of windows & Linux configuration, installation procedure, network configuration, driver configuration etc.
• Working knowledge of Diag, ONIE, BIOS, BMC, Linux and Windows operating systems

Knowledge of the following would be desirable:

• Experience of working in medium sized multidisciplinary development teams
• Ethernet Switches, Server, Storage products
• Orcad Schematics & Allegro PCB layout tools

Personal Attributes

The successful candidate will be a self-motivated individual capable of working with a minimum level of supervision in a dynamic team environment. Good interpersonal skills. Be able to communicate effectively (both verbal and written) with members of other teams, departments and clients; a high degree of liaison is needed.

Engineer, Hardware Design (Sustaining)

Date: Sep 26, 2025

Location: Penang, 07, MY

Functional Area: Engineering
Career Stream: Design Engineering Hardware
SAP Short Name: ENG-ENG-DHW
Job Level: Level 07
IC/MGR: Individual Contributor
Direct/Indirect Indicator: Indirect

Performs tasks such as, but not limited to, the following:

• Perform Hardware validation tests including but not limited to DVT (Design Validation Test), SPIT (Signal, Power, Integrity & Timing), Thermal, Reliability, Functional, Environmental, EMI/EMC, Burn-In and work with design engineering to resolve issues found during the testing process
• Prepare test plans and execute them for qualifying alternative components and design changes
• Able to create test scripts using Python or other scripting language
• Proficient in using various test and measurement equipment including but not limited to meters, oscilloscope, impedance analyzer, power meter, signal analyzer, spectrum analyzer, bus analyzers, thermal chamber
• Able to do basic soldering
• Able to install software such as Linux based operating systems and embedded firmware such as ONIE, BIOS, BMC, SES, CPLD/FPGA images
• Liaison with suppliers, customers, contractors, and other internal teams
• Update Bill of Material
• Create test reports and documentation such as PCNs, SOPs
• Flexible to support admin tasks such as lab management, shipping, raising PR/PO, inventory checking

• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.

• 1 to 4 years of related experience; experience in similar job roles

Bachelor degree or consideration of an equivalent combination of education and experience.

Educational Requirements may vary by Geography

This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law). Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

The successful candidate will be a self-starter who likes to take responsibility and works best with little supervision. Likes to perform a variety of tasks and have the ability to handle multiple priorities and has previously performed in a similar position. This is a 'hands-on' role requiring a strong technical background and product development experience.

Duties

• Identify technical issues, troubleshoot and resolve them by coordinating with R&D, Manufacturing and Field teams
• Participate in customer technical meetings and prepare training programs for internal subordinates.
• Hardware validation of Networking, Storage, Server products against customer's infield issues, requirements and Mfg. issues during NPI or RMA
• System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval.
• Qualify alternative components for compatibility, cost effectiveness and benchmarking.
• Support Manufacturing Engineering and Test Engineers on trouble shooting and resolving technical issues and root cause analysis.
• Work with software teams to identify root cause of system failure.
• Ability to install software such as Linux based Operating Systems, ONIE, BIOS, BMC, SES.
• Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum

Background

Candidates should have 8+ years' experience in either Network, Storage or Server products.

Candidates should have the following essential qualifications and experience:

• At least BEng. (Hons.) in Electronics or similar
• Strong electrical design and debug skills required
• Familiar with PCIe, NVMe, SAS, SATA, I2C, SPI, DDR buses
• SDRAM timing and integrity analysis for clocks, strobes, S&H, Power bounce, temp stability
• Hands-on design knowledge of latest peripheral chipsets for Gigabit Ethernet, SCSI, SATA, SAS, USB, Ethernet, & PCI cards etc.
• High performance RISC / X86 CPUs and architecture including Intel, AMD, MRVL
• Proficient in using various test and measurement equipment including but not limited to Oscilloscope, Impedance analyzer, Power meter, Signal analyzer, Spectrum analyzer
• Qualify alternative components for compatibility, cost effectiveness and benchmarking
• System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval.
• Work with software teams to identify root cause of system failure
• Working knowledge of windows & Linux configuration, installation procedure, network configuration, driver configuration etc.
• Working knowledge of Diag, ONIE, BIOS, BMC, Linux and Windows operating systems
• Knowledge of the following would be desirable: ● Experience of working in medium sized multidisciplinary development teams
• Ethernet Switches, Server, Storage products
• Orcad Schematics & Allegro PCB layout tools

Personal Attributes

The successful candidate will be a self-motivated individual capable of working with a minimum level of supervision in a dynamic team environment. Good interpersonal skills. Be able to communicate effectively (both verbal and written) with members of other teams, departments and clients; a high degree of liaison is needed.