247 Furnace Engineer jobs in Malaysia

Press Tab to Move to Skip to Content Link Select how often (in days) to receive an alert: Lead Thermal Test Engineer

Date:

Jul 22, 2025 Location:

Penang, 07, MY Functional Area:

Engineering Career Stream:

Design Engineering Hardware SAP Short Name:

LEN-ENG-DHW Job Level:

Level 08 IC/MGR:

Individual Contributor Direct/Indirect Indicator:

Indirect Summary

Detailed Description

Performs tasks such as, but not limited to, the following: Responsible for thermal test validation of IT equipments including server/storage/switch product. Set-up thermal test environment and execute the thermal test including wind-tunnel test and temperature test. Work with other function team to resolve thermal relevant issues. Document comprehensive thermal test plan and report. B.S. or above in Thermal Engineering or equivalent is required. Minimum 5 years’ experience in thermal design & test validation of electronic product, Server/storage/switch product experience is preferred. Familiar with thermal measurement technology and tools such as temperature data logger, IR camera, wind-tunnel and etc. Familiar with fluid dynamic and heat transfer knowledge Familiar with Thermal parts including Heat sink, TIM, air movers, etc. Hands on experience on validation test of various fan speed control algorithm and over temperature protection mechanism Good skills in thermal test data analysis and report Physical Demands

Duties of this position are performed in a normal office environment. Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data. Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required. Occasional travel may be required. Typical Experience

1 to 3 years of related experience in similar job roles Typical Education

Bachelor's Degree Notes

This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time. Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law). At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them. COMPANY OVERVIEW: Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers. Celestica would like to thank all applicants, however, only qualified applicants will be contacted. Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

#J-18808-Ljbffr

Press Tab to Move to Skip to Content Link

Select how often (in days) to receive an alert:

Lead Thermal Test Engineer

Location: Penang, 07, MY

Functional Area: Engineering
Career Stream: Design Engineering Hardware
SAP Short Name: LEN-ENG-DHW
Job Level: Level 08
IC/MGR: Individual Contributor
Direct/Indirect Indicator: Indirect

Summary

The Lead Engineer, Hardware Design works with cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations. Provide support throughout the manufacturing process of the electrical/mechanical system that they have designed.

Detailed Description

Performs tasks such as, but not limited to, the following:

• Responsible for thermal test validation of IT equipments including server/storage/switch product.
• Set-up thermal test environment and execute the thermal test including wind-tunnel test and temperature test.
• Work with other function team to resolve thermal relevant issues.
• Document comprehensive thermal test plan and report.
• B.S. or above in Thermal Engineering or equivalent is required.
• Minimum 5 years’ experience in thermal design & test validation of electronic product, Server/storage/switch product experience is preferred.
• Familiar with thermal measurement technology and tools such as temperature data logger, IR camera, wind-tunnel and etc.
• Familiar with fluid dynamic and heat transfer knowledge
• Familiar with Thermal parts including Heat sink, TIM, air movers, etc.
• Hands on experience on validation test of various fan speed control algorithm and over temperature protection mechanism
• Good skills in thermal test data analysis and report

Physical Demands

• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.

Typical Experience

• 1 to 3 years of related experience in similar job roles

Typical Education

• Bachelor's Degree

Notes

This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

#J-18808-Ljbffr

Req ID: 127388
Remote Position: No
Region: Asia
Country: Malaysia
State/Province: Bayan Lepas
City: Penang
**General Overview**
**Functional Area:** Engineering
**Career Stream:** Design Engineering Hardware
**SAP Short Name:** LEN-ENG-DHW
**IC/MGR:** Individual Contributor
**Direct/Indirect Indicator:** Indirect
**Summary**
The Lead Engineer, Hardware Design works with cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations. Provide support throughout the manufacturing process of the electrical/mechanical system that they have designed. #LI-LX1
**Detailed Description**
Performs tasks such as, but not limited to, the following:
+ Responsible for thermal test validation of IT equipments including server/storage/switch product.
+ Set-up thermal test environment and execute the thermal test including wind-tunnel test and temperature test.
+ Work with other function team to resolve thermal relevant issues.
+ Document comprehensive thermal test plan and report.
**Knowledge/Skills/Competencies**
+ B.S. or above in Thermal Engineering or equivalent is required.
+ Minimum 5 years' experience in thermal design & test validation of electronic product, Server/storage/switch product experience is preferred.
+ Familiar with thermal measurement technology and tools such as temperature data logger, IR camera, wind-tunnel and etc.
+ Familiar with fluid dynamic and heat transfer knowledge
+ Familiar with Thermal parts including Heat sink, TIM, air movers, etc.
+ Hands on experience on validation test of various fan speed control algorithm and over temperature protection mechanism
+ Good skills in thermal test data analysis and report
**Physical Demands**
+ Duties of this position are performed in a normal office environment.
+ Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
+ Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
+ Occasional travel may be required.
**Typical Experience**
+ Minimum 3 years of related experience in similar job roles
**Typical Education**
+ Bachelor's Degree
**Notes**
This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
**COMPANY OVERVIEW:**
Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Press Tab to Move to Skip to Content Link Select how often (in days) to receive an alert: Lead Thermal Test Engineer

Location:

Penang, 07, MY Functional Area:

Engineering Career Stream:

Design Engineering Hardware SAP Short Name:

LEN-ENG-DHW Job Level:

Level 08 IC/MGR:

Individual Contributor Direct/Indirect Indicator:

Indirect Summary

The Lead Engineer, Hardware Design works with cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations. Provide support throughout the manufacturing process of the electrical/mechanical system that they have designed. Detailed Description

Performs tasks such as, but not limited to, the following: Responsible for thermal test validation of IT equipments including server/storage/switch product. Set-up thermal test environment and execute the thermal test including wind-tunnel test and temperature test. Work with other function team to resolve thermal relevant issues. Document comprehensive thermal test plan and report. B.S. or above in Thermal Engineering or equivalent is required. Minimum 5 years’ experience in thermal design & test validation of electronic product, Server/storage/switch product experience is preferred. Familiar with thermal measurement technology and tools such as temperature data logger, IR camera, wind-tunnel and etc. Familiar with fluid dynamic and heat transfer knowledge Familiar with Thermal parts including Heat sink, TIM, air movers, etc. Hands on experience on validation test of various fan speed control algorithm and over temperature protection mechanism Good skills in thermal test data analysis and report Physical Demands

Duties of this position are performed in a normal office environment. Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data. Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required. Occasional travel may be required. Typical Experience

1 to 3 years of related experience in similar job roles Typical Education

Bachelor's Degree Notes

This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time. Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law). At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them. COMPANY OVERVIEW: Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers. Celestica would like to thank all applicants, however, only qualified applicants will be contacted. Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

#J-18808-Ljbffr

Job Responsibility

• Detail designing and calculation for all mechanical services required in the project.
• Attend technical meetings with clients and consultants to resolve technical issues.
• Producing and implementing designs and test procedures.
• To carry out any other duties as assigned by superior or management
  
  

Job Requirements

• Proficiency in English, Bahasa Malaysia and Mandarin is an advantage
• Candidate possesses at least a Degree or above
• Fresh graduates are welcome.
• Proficiency in Auto CAD software ( to understand 2D & 3D Drawing ).
• Provide drawing for tender submission.
• Liaise with authority.
• Capable of working independently with minimal supervision and timelines.
• Able to start immediately would be an advantage.
  
  

Job Benefits

• Miscellaneous allowance
• Medical claim
• 5 working days
• EPF SOCSO

#J-18808-Ljbffr

Add expected salary to your profile for insights

Provide technical support & anticipate production problems. Identify and resolve technical process problems related to materials, tooling, and equipment in the area of responsibility.

Design jigs & fixtures to improve machine capabilities, productivity, and efficiency.

Identify customer needs and propose effective solutions.

Identify new business accounts and seek new prospects to expand business growth.

Support in the execution of daily sales operations from processing customer orders to final delivery.

Support & assist the engineering team with daily tasks.

Job Requirements:

• Degree in Mechanical Engineering/Mechatronics or equivalent
• Proficient in AUTO-CAD/SolidWorks
• Ability to work independently and under pressure
• Strong interpersonal skills, positive attitude, and self-motivated
• Fresh graduates are encouraged to apply

Unlock job insights

Salary match | Number of applicants | Skills match

Your application will include the following questions:

• What qualifications do you have?
• What is your right to work in Malaysia?
• What is your expected monthly salary?
• How many years of experience do you have as a mechanical engineer?
• Which CAD software do you have experience with?
• Which languages are you fluent in?
• Do you have technical support experience?

To help fast track investigation, please include any relevant details if you report this job ad as fraudulent, misleading, or discriminatory.

What can I earn as a Mechanical Engineer?

#J-18808-Ljbffr

About the Company :

inTEST Thermal Solutions (iTS), part of InTest Corporation's Environmental Technologies Division, designs and manufactures precision temperature control systems. Known worldwide for expertise in thermal simulation from –185 to +500°C, iTS offers rapid transitions and long dwell times. Its four brands are Temptronic, Sigma Systems, Thermonics, and North Sciences.

InTest Corporation is a global provider of test and process technology solutions serving markets such as automotive/EV, defense/aerospace, industrial, life sciences, security, and semiconductor manufacturing. With decades of engineering experience, InTest addresses thermal, mechanical, imaging, and electronic challenges for clients worldwide. Founded in 1981, the company is publicly traded on the NYSE under INTT.

InTest Thermal Solutions is seeking a highly skilled Mechanical Engineer with 5-7 years of experience and a strong educational background in Thermal or Refrigeration Engineering. The ideal candidate will be responsible for the design, testing, and integration of advanced refrigeration systems capable of achieving ultra-low temperatures. This role requires expertise in thermodynamics, heat transfer, and refrigeration engineering to support product development and innovation. The position reports to the Lead Mechanical Engineer.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Design and develop ultra-cold thermal chiller systems utilizing advanced refrigeration technologies.
• Carry out thermal and mechanical analyses to verify system performance and reliability.
• Work with cross-functional teams to integrate refrigeration systems into thermal test equipment.
• Conduct testing and validation of components and systems to ensure compliance with performance requirements.
• Prepare comprehensive engineering documentation, including design drawings, specifications, and test reports.
• Provide technical support and troubleshooting assistance to manufacturing and field service teams.
• Maintain adherence to industry standards and safety regulations in refrigeration system design.
• Use SolidWorks and thermal simulation tools for system modeling and optimization.
• Estimate design costs and coordinate with system engineering, application engineering, manufacturing, and suppliers to ensure the design meets intended requirements.
• Support implementation of new designs or related manufacturing processes; update ISO-related documents and procedures as necessary.
• Perform additional engineering tasks as assigned.

QUALIFICATIONS:

• BSME or MSME with an emphasis on thermodynamics, heat transfer, or refrigeration engineering.
• 5-7 years of experience in mechanical design, specifically in ultra-cold refrigeration systems.
• Proficient in SolidWorks, thermal simulation software, and refrigeration system modeling.
• Knowledge of refrigeration cycles, compressor technologies, and heat exchangers.
• Experience in the semiconductor or capital equipment industry considered beneficial.
• Demonstrated problem-solving, communication, and project management abilities.
• Capable of working independently as well as part of a team in a fast-paced engineering setting.
• Familiarity with Modeling Packages (such as SDRC Modeling (FEA/FEM), Autodesk, Ansys; SolidWorks, Cosmos, and Flo Works (are preferred).
• Hydraulic, pneumatic, and refrigeration piping modeling is desirable.
• Excellent written and verbal communication, interpersonal interactions, mathematical applications, Microsoft Office, Windows, and ERP/MRP systems.
• Fluent in English written and oral
• Experience working in a multi-national organization is a plus

#J-18808-Ljbffr

Our client, located in Pasir Gudang, has been trading electronic products since 1995. With branches in Tokyo, Shanghai, Hong Kong & Shenzhen, Singapore, and Malaysia, the company has earned trust from clients like Panasonic, Toshiba, and Seiko Instruments. They offer competitive services and warehousing solutions, emphasizing quality, cost, and continuous improvement. Their secure facilities, equipped with CCTV, can accommodate 1,490 pallets, and they continuously enhance their product lines to ensure customer satisfaction with high-quality, competitively priced products.

Responsibilities:

• Production supervision : Must have

They are usually involved in the production process, ensuring that products are built to specifications and identifying potential problems that may arise during production. This includes collaborating with other engineers and production staff to solve problems and improve processes.

• Maintenance and troubleshooting : Must have

Once a product is in use, mechanical engineers may be responsible for its maintenance and troubleshooting. This involves diagnosing problems, making necessary repairs, and suggesting improvements to improve performance and reliability.

• Analysis and testing : Not a Must, but Nice to have for BMM jobs

Mechanical engineers analyze and review their designs to ensure they meet the required specifications and performance standards. This can include using simulation software to predict how a component will behave under different conditions, as well as performing physical tests to validate these predictions.

Required skills and knowledge :

• Technical Proficiency :

A deep understanding of mechanical engineering principles and the ability to apply them in practical scenarios is essential. This includes knowledge of mechanics, thermodynamics, materials science, and structural analysis.

knowledge of Designing manufacturing processes, jigs, fixtures,
and various manufacturing specs.

• Problem-solving skills :

Mechanical engineers must be skilled at identifying problems and developing effective solutions. It involves critical thinking and the ability to analyze complex systems.

Accuracy is essential in mechanical engineering, as even small mistakes can lead to significant problems. Engineers must pay attention to detail in every aspect of their work, from design to testing to manufacturing.

Effective communication is essential, as mechanical engineers often work in teams and must convey complex technical information to non-engineers. This includes writing reports, creating presentations, and collaborating with colleagues.

Education : B.sc Mechanical engineering.

Tools : MS Office, CAD (SolidWorks- advantage).English Language : Read/Write/Speak in high level.

Experience : 3-5 Years experience in Manufacturing Engineering, Quality, and Production areas.

Salary Range:

• From RM5000 to RM7000
• EPF, SOCSO
• Annual bonus
• Annual leave
• Sick leave
• Annual Increment
  
• Medical Benefit
• Group Hospitalization & Surgery Insurance

#J-18808-Ljbffr

Job Title: Mechanical Engineer

Location: Singapore

About Us: We are a leading AI and robotics company at the forefront of technological innovation, dedicated to creating cutting-edge solutions that revolutionize industries. As we continue to grow, we are seeking talented Mechanical Engineers to join our team.

Job Description: dConstruct is looking for mechanical engineers to join our vibrant and driven systems integration team working on solving challenging problems in robotics. As a mechanical engineer at dConstruct, you will be building the systems needed to solve complex real-world problems. You will be working with clients to understand their needs and, in turn, implement their requirements accordingly.

Responsibilities:

1. Mechanical design for robotics structures, mechanisms and systems integration.

2. Plan and select hardware components to support robotic systems.

3. Work with internal/external partners to support part fabrication and custom sub-assembly.

4. Hands-on work constructing sub-assemblies to full robot systems.

5. Create specifications and design schemes.

6. Select components and vendors.

7. Liaise with electrical engineers, software engineers and other stakeholders to deliver robust hardware.

8. Define test plans and evaluate mechanical reliability.

9. Perform troubleshooting for issues that arise.

Requirements and Skills:

1. Bachelor’s degree in mechanical engineering, mechatronics engineering, robotics engineering, or other related fields.

2. 5+ years experience in mechanical design engineering and with experience in machine design.

3. Experience and knowledge in robotics is preferred.

4. Familiar with CAD software. SolidWorks is preferred.

5. Familiar with manufacturing technologies (3D printing, sheet metal, etc.).

6. Comfortable with tool usage, including power tools.

7. Bonus to have basic knowledge of C/C++.

8. Familiarity with industrial safety standards.

9. Good technical communication skills.

10. Able to work independently with some guidance.

#J-18808-Ljbffr