60 Chemical Industry jobs in Malaysia

We are hiring a highly dedicated Process Engineering Technician who will handle all maintenance matters related to process equipment/ jig/ fixture/ tooling used by Production at our Medical Device/Pharmaceutical sector .

Key Responsibilities:

• Complete maintenance activities without undue delay and record these activities in PEMAC or relevant system/ document.
• Assist in maintaining spare parts for process equipment/ jig/ fixture/ tooling used by Production.
• Assist to supervise and facilitate vendor’s work related to process equipment/ jig/ fixture/ tooling used by Production when vendor is required to work onsite.
• Assist in the qualification works of process equipment/ jig/ fixture/ tooling used by Production.
• Perform verification activities for process equipment/ jig/ fixture/ tooling that has been returned from repair or service, before returning to Production for use.
• Perform troubleshooting and/or testing activities on process equipment/ jig/ fixture/ tooling.
• Responsible to handle any process equipment/ jig/ fixture/ tooling with care when performing assigned task.
• Responsible to highlight to Superior on unfamiliar/ uncommon situation encountered when performing assigned task.
• Uphold all safety and health measures when carrying out assigned task.
• Authorize to stop the operation or withdraw any process equipment/ jig/ fixture/ tooling used by Production that is found faulty or deemed not safe to be used.

Key Requirements:

• Candidate must possess at least a Technical Certificate / Diploma in Engineering (Mechanical) or equivalent.
• At least 1-2 year(s) of hands-on working experience in production machine operational & maintenance activities is required for this position, preferably in Medical Device industry .
• Have similar experience working in cleanroom environment .
• Able to work in a team under minimum supervision.
• Proactive and resourceful.
• Good written and verbal communication skills in English and Bahasa Malaysia.

#J-18808-Ljbffr

Intern, Process Engineering
Job Description
+ Gain hands-on experience in a manufacturing environment, understanding Renesas product and process flow.
+ Develop supervisory and communication skills through daily interactions with various departments.
+ Assist in root cause analysis, data collection, and lot disposition for daily operations.
+ Collaborate with process engineers to maintain equipment and improve line performance using engineering tools.
+ Participate in planning and executing new product introduction projects
Qualifications
+ Educational Background: Bachelor's degree in electronic engineering, electrical engineering, computer science or a related field in science & engineering.
+ Computer and software skills such as basic programming C++, Minitab, Microsoft Office Tool such as Microsoft Word, Microsoft Excel, Power Point will be an added advantage.
+ Able to contribute ideas and work in team.
+ Able to work independently and interact with people at all levels.
Company Description
Renesas is a global semiconductor company providing hardware and software solutions for a range of cutting-edge technologies including self-driving cars, robots, automated factory equipment, and smart home applications. We are a key supplier to the world's leading manufacturers of electronics you rely on every day; you may not see our products, but they are all around you.
Renesas is a global, multi-billion dollar, publicly traded company headquartered in Japan, and has subsidiaries in 20 countries worldwide. Renesas is a dynamic, multi-cultural technology company where employees learn, mentor, innovate and thrive. Renesas is extending our share in fast-growing data economy-related markets such as infrastructure and data center and strengthening our presence in the industrial/IOT and automotive segments. Our solutions drive products developed by major innovators around the world. Join us and build your future by being part of what's next in electronics.
Additional Information
Renesas is an embedded semiconductor solution provider driven by its Purpose ' **To Make Our Lives Easier** .' As the industry's leading expert in embedded processing with unmatched quality and system-level know-how, we have evolved to provide scalable and comprehensive semiconductor solutions for automotive, industrial, infrastructure, and IoT industries based on the broadest product portfolio, including High Performance Computing, Embedded Processing, Analog & Connectivity, and Power.
With a diverse team of over 21,000 professionals in more than 30 countries, we continue to expand our boundaries to offer enhanced user experiences through digitalization and usher into a new era of innovation. We design and develop sustainable, power-efficient solutions today that help people and communities thrive tomorrow, ' **To Make Our Lives Easier** .'
At Renesas, you can:
+ **Launch and advance your career** in technical and business roles across four Product Groups and various corporate functions. You will have the opportunities to explore our hardware and software capabilities and try new things.
+ **Make a real impact** by developing innovative products and solutions to meet our global customers' evolving needs and help make people's lives easier, safe and secure.
+ **Maximize your performance and wellbeing** in our flexible and inclusive work environment. Our people-first culture and global support system, including the remote work option and Employee Resource Groups, will help you excel from the first day.
Are you ready to own your success and make your mark?
Join Renesas. Let's **Shape the Future** together.
Renesas Electronics is an equal opportunity and affirmative action employer, committed to supporting diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by law. For more information, please read our Diversity & Inclusion Statement ( .
VideoUrl
**Department** Manufacturing
2. **Location** Kulim
3. **Remote** No
Requisition ID
20016311_2025-07-04
Apply
Shortlist

We are hiring a highly dedicated

Process Engineering Technician

who will

handle all maintenance matters

related to

process equipment/ jig/ fixture/ tooling used by Production

at our

Medical Device/Pharmaceutical sector . Key Responsibilities:

Complete maintenance activities without undue delay and record these activities in PEMAC or relevant system/ document. Assist in maintaining spare parts for process equipment/ jig/ fixture/ tooling used by Production. Assist to supervise and facilitate vendor’s work related to process equipment/ jig/ fixture/ tooling used by Production when vendor is required to work onsite. Assist in the qualification works of process equipment/ jig/ fixture/ tooling used by Production. Perform verification activities for process equipment/ jig/ fixture/ tooling that has been returned from repair or service, before returning to Production for use. Perform troubleshooting and/or testing activities on process equipment/ jig/ fixture/ tooling. Responsible to handle any process equipment/ jig/ fixture/ tooling with care when performing assigned task. Responsible to highlight to Superior on unfamiliar/ uncommon situation encountered when performing assigned task. Uphold all safety and health measures when carrying out assigned task. Authorize to stop the operation or withdraw any process equipment/ jig/ fixture/ tooling used by Production that is found faulty or deemed not safe to be used. Key Requirements:

Candidate must possess at least a

Technical Certificate / Diploma

in

Engineering (Mechanical)

or equivalent. At least 1-2 year(s) of hands-on working experience in

production machine operational & maintenance activities

is required for this position, preferably in

Medical Device industry . Have similar experience working in

cleanroom environment . Able to work in a team under minimum supervision. Proactive and resourceful. Good written and verbal communication skills in English and Bahasa Malaysia.

#J-18808-Ljbffr

Manager I, Process Engineering page is loadedManager I, Process Engineering Apply locations Johor, Malaysia time type Full time posted on Posted Yesterday time left to apply End Date: October 3, 2025 (30+ days left to apply) job requisition id R-2025-40924

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As a Manager I supporting Process Engineering , you will be primarily responsible for leading a team to design, develop, and implement efficient production processes, ensuring productivity and compliance with regulations at Johor, Malaysia . In this role, a typical day will include:

• Lead the calibration team to provide calibration support for all equipment, machinery and instrument in the plant to ensure all registered items remain in calibrated state

• Perform calibration datasheet/ certificate review, IMTE registration and support ad-hoc calibration activities.

• Arrange and monitor 3rd party calibration activities such as request quotation, raise purchase requisition (PR), follow up PO progress, service request report closure, shipment progress, arrange schedule for on-site calibration job and deal with vendor for any calibration issues

• Lead improvement projects for continuous improvement such as cost savings, process optimization and improve process efficiency

• Investigate persistent quality issues of the calibration process, IMTE and provide appropriate Corrective/ Preventive actions

• Assist Manager for yearly budget planning, monitor department spending and ensure on time submission of monthly forecast spending to Finance in monthly basis

• To be responsible for training (eg SOP, annual refresher), Initial Qualification/ Requalification, annual curricula review and coordination with QA Compliance

• Establish and ensure SOPs and documentation are compliance with Data Integrity, OSHA, ISO 13485, GxP, and other applicable international regulations

• Adherence to Alcon values and behaviors, observe and ensure full compliance with Alcon Code of Business Conducts, and Alcon Health, Safety and Environment Standards

WHAT YOU’LL BRING TO ALCON:

• Education: Degree in Engineering, Science or Manufacturing fields or

• Diploma in Engineering, Science or Manufacturing fields with minimum 10 years of experience in calibration or manufacturing environment

• 8 years of experience in managing team of engineers and technicians to lead calibration activities in manufacturing environment

HOW YOU CAN THRIVE AT ALCON:

• Join Alcon’s mission to provide outstanding, innovative products and solutions to improve sight, improve lives, and grow your career!

• See your career like never before with focused growth and development opportunities

• Collaborate with teammates to share best practices and learnings as work evolves

Alcon Careers

See your impact at alcon.com/careers

ATTENTION: Current Alcon Employee/Contingent Worker

If you are currently an active employee/contingent worker at Alcon, please click the appropriate link below to apply on the Internal Career site.

Find Jobs for Employees

Find Jobs for Contingent Worker

If you are currently an active employee/contingent worker at Alcon, please click the appropriate link below to apply on the Internal Career site.

#J-18808-Ljbffr

Press Tab to Move to Skip to Content Link

Department: NPI Process Development & Validation

Employment Type: Full-time

Ambu A/S is currently looking for an NPI Engineer for our Process Engineering team to be based in Ambu Global Hub, in Penang, Malaysia.

Key responsibilities

Your main responsibilities will include:

• Collaborate with designers to ensure product designs incorporate Design for Assembly (DFA) principles for enhanced manufacturability.
• Design and optimize manufacturing processes for efficiency and quality, ensuring compliance with industry standards and regulations.
• Design and develop prototype jigs and fixtures for sample builds, incorporating Poka Yoke (error-proofing) techniques to prevent defects and ensure high-quality results.
• Integrate ergonomics and safety considerations into all aspects of process design and development to ensure a safe and comfortable working environment.
• Perform risk assessments for new processes and implement measures to mitigate identified risks.
• Collaborate with the Equipment Development & Automation team to define Process Input Requirements (PIR).
• Conduct feasibility studies, Design of Experiments (DOE), and Process Capability Studies (PCS) to identify optimal process windows that ensure consistent product quality.
• Provide technical support and troubleshooting for process-related issues.

Suggested candidate profile

Skills and experiences can be earned in many different ways, and we understand that the best fit for the role cannot be prescribed on paper. You are however likely to succeed in this position if you:

• Bachelor's or Master's degree in Mechanical Engineering, Manufacturing Engineering, or a related field.
• Experience in process engineering or NPI within a manufacturing or R&D environment.
• Experience with semi-automated manufacturing equipment and electro-mechanical systems is a plus.
• Familiarity with tools and techniques like Design for Assembly (DFA), Poka Yoke, FMEA (Failure Mode and Effects Analysis), and DOE (Design of Experiments).
• Strong understanding of various manufacturing processes (e.g., assembly, ultrasonic, UV gluing & curing, and testing & inspection).
• Proficiency in quality systems and standards, along with knowledge of FDA regulations and compliance requirements for medical devices.
• Excellent problem-solving and analytical skills.
• Effective communication and collaboration skills.

Ambu – a visionary and international workplace where your efforts matterAmbu is a company that expands rapidly and has ambitious growth targets. We meet these targets through interdisciplinary teamwork between motivated and highly skilled employees. Your contributions and efforts are crucial to our success and by joining us you will get the opportunity to work in an international head office with an informal working environment.

We offer great opportunities for personal development. Furthermore, we offer a wide range of professional, social and financial employee benefits in addition to exciting job challenges and continuous professional and personal development.

About Ambu

Ambu has been bringing the solutions of the future to life since 1937. Today, millions of patients and healthcare professionals worldwide depend on the efficiency, safety and performance of our single-use endoscopy, anaesthesia, and patient monitoring solutions. We continuously look to the future with a commitment to deliver innovative quality products that have a positive impact on patient care and the work of healthcare professionals. Headquartered near Copenhagen in Denmark, Ambu employs approximately 4,500 people in Europe, North America and the Asia Pacific.

#J-18808-Ljbffr

Press Tab to Move to Skip to Content Link

Select how often (in days) to receive an alert:

Manufacturing Process Engineering Manager

Date: Jul 30, 2025

Location: Senai, 01, MY

Req ID: 127649
Remote Position: No
Region: Asia
Country: Malaysia
State/Province: Johor
City: Senai

We are looking for an experienced Engineering Manager specializing in Printed Circuit Board Assembly (PCBA) to lead our hardware team with a strong focus on Existing customer growths and New Product Introduction (NPI), high preferable from High-Mix Low-Volume working experiences (HMLV) manufacturing, and continuous improvement in yield, quality, and cost efficiency.

The ideal candidate will drive PCBA process improvement, manufacturing optimization, NPI support and cross-functional collaboration to ensure scalable, high-quality, and cost-effective solutions.

Detailed Description

• Oversee end-to-end NPI activities for PCBA, ensuring smooth transition from design to mass production.
• Collaborate with Internal DFM team and customer, manufacturing peers, and suppliers to meet DFM/DFT (Design for Manufacturing/Test) requirement
• Resolve technical challenges during prototyping, pilot runs, and production ramp-up.

High-Mix Low-Volume (HMLV) Process Expertise

• Optimize PCBA processes for HMLV environments, ensuring flexibility and efficiency.
• Manage BOM optimization, component obsolescence, and alternate sourcing strategies.
• Work closely with internal equipment team to ensure quick changeovers and minimal downtime.

Detailed Description 2

Yield & Quality Improvement

• Develop PFMEA and implement poka-yoke solution, technical action (Jig/fixtures) to improve first-pass yield.
• Lead root cause analysis (RCA) for PCBA failures and implement corrective actions.
• Establish quality metrics and drive continuous improvement (e.g., Six Sigma, Lean methodologies).
• Deep knowledge for root cause analysis

Cost-Saving & Lean Initiatives

• Identify and execute cost-reduction opportunities, Material, overhead reduction without compromising quality.
• Implement **Lean manufacturing** principles to eliminate waste in PCBA processes.
• Optimize inventory management for HMLV production through good yield to reduce bonepile inventory.

Team & Cross-Functional Leadership

• Mentor Engineers and technicians for manufacturing teams.
• Collaborate with Test engineering, Operation (Production), and QA teams to ensure product reliability.
• Communicate technical and project updates to senior management.
• Education: Bachelor’s/Master’s in Electrical/Electronic Engineering or related field.
• Experiences: 8+ years in PCBA manufacturing /NPI, including 3+ years in leadership.
• Proven track record in **HMLV manufacturing, yield improvement, and cost reduction**.
• Expertise in IPC standards (IPC-A-610, IPC-7351).
• Familiarity with Six Sigma, Lean, and Kaizen methodologies.
• Soft Skills: Strong problem-solving, stakeholder management, and data-driven decision-making.

Preferred Qualifications:

• Experience in Manufacturing engineering for PCBA assembly.
• Knowledge of **thermal/mechanical stress analysis** for reliability.
• Background in Industrial and Test measurement product compliance .
• Stronger PCBA Process / NPI focus*– Added end-to-end ownership of prototyping to production.
• HMLV expertise – Highlighted process flexibility and supply chain challenges.
• Yield/quality/cost – Explicitly called out Lean, Six Sigma, and RCA.

Notes

This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

#J-18808-Ljbffr

**Company Description**
Sandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today's needs and tomorrow's next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we're living in and that we have the power to shape.
Sandisk meets people and businesses at the intersection of their aspirations and the moment, enabling them to keep moving and pushing possibility forward. We do this through the balance of our powerhouse manufacturing capabilities and our industry-leading portfolio of products that are recognized globally for innovation, performance and quality.
Sandisk has two facilities recognized by the World Economic Forum as part of the Global Lighthouse Network for advanced 4IR innovations. These facilities were also recognized as Sustainability Lighthouses for breakthroughs in efficient operations. With our global reach, we ensure the global supply chain has access to the Flash memory it needs to keep our world moving forward.
**Job Description**
**ESSENTIAL DUTIES AND RESPONSIBILITIES:**
+ Perform programming and troubleshooting of AOI inspection systems and other designed manufacturing equipment
+ Monitor machine performance and fine-tune programs to improve accuracy and productivity
+ Work closely with cross-functional teams (Equipment, QA and Operations team) to resolve issues
+ Minimize product changeover duration and process fine-tuning requirements
+ Maintain production runs at optimal yield levels
+ Undertake additional responsibilities as required by business needs
**Qualifications**
REQUIRED:
+ Diploma related Electronics, Electrical, Mechanical and Computer Technology
+ Minimum 2 years of recent experience working in an area of their specialty or related field
+ Willing to work in 12 hours rotation shift
+ Advanced skills in Microsoft Word, Excel, Access and PowerPoint
PREFERRED:
+ Hands-on experience with AOI inspection machines
+ Familiar with AOI programming and fine tuning
SKILLS:
+ Basic knowledge of electronics components and PCB assembly
+ Good communication and teamwork skills
+ Attention to detail and commitment to quality
+ Able to work on rotating shifts and perform overtime if required
**Additional Information**
Sandisk thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution.
Sandisk is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at ( ) to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.
**NOTICE TO CANDIDATES:** Sandisk has received reports of scams where a payment is requested on Sandisk's behalf as a condition for receiving an offer of employment. Please be aware that Sandisk and its subsidiaries will never request payment as a condition for applying for a position or receiving an offer of employment. Should you encounter any such requests, please report it immediately to Sandisk Ethics Helpline ( or email

**Company Description**
Sandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today's needs and tomorrow's next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we're living in and that we have the power to shape.
Sandisk meets people and businesses at the intersection of their aspirations and the moment, enabling them to keep moving and pushing possibility forward. We do this through the balance of our powerhouse manufacturing capabilities and our industry-leading portfolio of products that are recognized globally for innovation, performance and quality.
Sandisk has two facilities recognized by the World Economic Forum as part of the Global Lighthouse Network for advanced 4IR innovations. These facilities were also recognized as Sustainability Lighthouses for breakthroughs in efficient operations. With our global reach, we ensure the global supply chain has access to the Flash memory it needs to keep our world moving forward.
**Job Description**
**ESSENTIAL DUTIES AND RESPONSIBILITIES:**
+ Perform programming and troubleshooting of AOI inspection systems and other designed manufacturing equipment
+ Monitor machine performance and fine-tune programs to improve accuracy and productivity
+ Work closely with cross-functional teams (Equipment, QA and Operations team) to resolve issues
+ Minimize product changeover duration and process fine-tuning requirements
+ Maintain production runs at optimal yield levels
+ Undertake additional responsibilities as required by business needs
**Qualifications**
REQUIRED:
+ Diploma related Electronics, Electrical, Mechanical and Computer Technology
+ Minimum 2 years of recent experience working in an area of their specialty or related field
+ Willing to work in 12 hours rotation shift
+ Advanced skills in Microsoft Word, Excel, Access and PowerPoint
PREFERRED:
+ Hands-on experience with AOI inspection machines
+ Familiar with AOI programming and fine tuning
SKILLS:
+ Basic knowledge of electronics components and PCB assembly
+ Good communication and teamwork skills
+ Attention to detail and commitment to quality
+ Able to work on rotating shifts and perform overtime if required
**Additional Information**
Sandisk thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution.
Sandisk is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at ( ) to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.
**NOTICE TO CANDIDATES:** Sandisk has received reports of scams where a payment is requested on Sandisk's behalf as a condition for receiving an offer of employment. Please be aware that Sandisk and its subsidiaries will never request payment as a condition for applying for a position or receiving an offer of employment. Should you encounter any such requests, please report it immediately to Sandisk Ethics Helpline ( or email

**Company Description**
Sandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today's needs and tomorrow's next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we're living in and that we have the power to shape.
Sandisk meets people and businesses at the intersection of their aspirations and the moment, enabling them to keep moving and pushing possibility forward. We do this through the balance of our powerhouse manufacturing capabilities and our industry-leading portfolio of products that are recognized globally for innovation, performance and quality.
Sandisk has two facilities recognized by the World Economic Forum as part of the Global Lighthouse Network for advanced 4IR innovations. These facilities were also recognized as Sustainability Lighthouses for breakthroughs in efficient operations. With our global reach, we ensure the global supply chain has access to the Flash memory it needs to keep our world moving forward.
**Job Description**
**ESSENTIAL DUTIES AND RESPONSIBILITIES:**
+ Perform programming and troubleshooting of AOI inspection systems and other designed manufacturing equipment
+ Monitor machine performance and fine-tune programs to improve accuracy and productivity
+ Work closely with cross-functional teams (Equipment, QA and Operations team) to resolve issues
+ Minimize product changeover duration and process fine-tuning requirements
+ Maintain production runs at optimal yield levels
+ Undertake additional responsibilities as required by business needs
**Qualifications**
REQUIRED:
+ Diploma related Electronics, Electrical, Mechanical and Computer Technology
+ Minimum 2 years of recent experience working in an area of their specialty or related field
+ Willing to work in 12 hours rotation shift
+ Advanced skills in Microsoft Word, Excel, Access and PowerPoint
PREFERRED:
+ Hands-on experience with AOI inspection machines
+ Familiar with AOI programming and fine tuning
SKILLS:
+ Basic knowledge of electronics components and PCB assembly
+ Good communication and teamwork skills
+ Attention to detail and commitment to quality
+ Able to work on rotating shifts and perform overtime if required
**Additional Information**
Sandisk thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution.
Sandisk is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at ( ) to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.
**NOTICE TO CANDIDATES:** Sandisk has received reports of scams where a payment is requested on Sandisk's behalf as a condition for receiving an offer of employment. Please be aware that Sandisk and its subsidiaries will never request payment as a condition for applying for a position or receiving an offer of employment. Should you encounter any such requests, please report it immediately to Sandisk Ethics Helpline ( or email