16 Assembly Operator jobs in Malaysia

Job Description

Soldering, antenna element assembly with screws, apply Loctite, apply RTV etc.

Job Requirements

With work experience in assembly of electronics, electromechanical components.

Operator is expected to wear mask/gloves, and ESD strap.

Education level: ‘N’-Level, NITEC Certificate with technical background.

Open to Singaporeans only.

The working hours are as follows:

Mondays to Thursdays: 8.30am to 6.00pm

Fridays: 8.30am to 5.30pm

Meal Breaks: 1 hour

The basic monthly salary will commensurate with the shortlisted candidate’s work experience, negotiable.

#J-18808-Ljbffr

The Operator is required to perform soldering of PCB, electronics and wiring harness etc.

The Operator must have a solid understanding of electronic components and PCB, soldering processes including through-hole and surface mount soldering/rework and ability to work and solder under microscope for long hours (minimum 8 hrs).

The Operator must also have knowledge of conformal coating processes, such as application methods of spray/manual brushing process.

The Operator must be able to work under cleanroom environment, with donning of ESD apparels such as smock, shoes, hairnet, mask.

The working hours are as follows:

Mondays to Thursdays: 8.30am to 6.00pm

Fridays: 8.30am to 5.30pm

Meal Breaks: 1 hour

Education level:

N level, NITEC in Electronics & Internet of Things or NITEC in Microelectronics is preferred though not essential.

Understanding of assembly instructions and specifications is necessary for complying with procedures and meeting quality standards.

Fresh graduate, or 1-2 years of working experience.

Ability to work independently.

Open to Singaporeans and Singapore Permanent Residents only.

The basic monthly salary will commensurate with the shortlisted candidate’s work experience, negotiable.

#J-18808-Ljbffr

The Operator is required to perform

soldering

of PCB, electronics and wiring harness etc. The Operator must have a solid understanding of electronic components and PCB, soldering processes including through-hole and surface mount soldering/rework and ability to work and solder under microscope for long hours (minimum 8 hrs). The Operator must also have knowledge of conformal coating processes, such as application methods of spray/manual brushing process. The Operator must be able to work under cleanroom environment, with donning of ESD apparels such as smock, shoes, hairnet, mask. The working hours are as follows: Mondays to Thursdays: 8.30am to 6.00pm Fridays: 8.30am to 5.30pm Meal Breaks: 1 hour Education level: N level, NITEC in Electronics & Internet of Things or NITEC in Microelectronics is preferred though not essential. Understanding of assembly instructions and specifications is necessary for complying with procedures and meeting quality standards. Fresh graduate, or 1-2 years of working experience. Ability to work independently. Open to Singaporeans and Singapore Permanent Residents only. The basic monthly salary will commensurate with the shortlisted candidate’s work experience, negotiable.

#J-18808-Ljbffr

Every minute of every day, Smiths Detection’s threat detection and security screening technology helps to protect people and infrastructure, making the world a safer place.

Smiths Detection, part of Smiths Group is a global leader in the development, manufacture and management of security and detection solutions designed to make the world a safer place. Our technology provides threat detection and screening solutions for customers in our key markets: aviation, ports and borders, defence, and urban security.

Our expertise spans 21 global offices, seven manufacturing sites and five R&D centres, with a global network of 3,000 dedicated colleagues contributing towards over 40 years at the frontline of advances in safety and security.

This results in careers built on variety and the opportunity to work on a range of state-of-the-art solutions, where you can develop your knowledge and experience every day.

Job Description

SUMMARY OF ESSENTIAL FUNCTIONS:

The Assembly Operator performs complex assembly using machinery, tools and equipment. The role includes following detailed instructions and conducting standard quality control (QC) testing.

SPECIFIC DUTIES, ACTIVITIES AND RESPONSIBILITIES INCLUDE BUT ARE NOT LIMITED TO :

• CXS
  • Perform machine assembly (wiring, generator, detector).
  • Perform Final Assembly that is done after cross check completed including obtaining approval from RPO.
• GENERATOR
  • Perform inner assembly process for all models of generator (material preparation & jumper, tube & cap assembly, sub-inner assembly, inner assembly & inspection).
  • Perform offline preparation to support generator assembly line (lead shielding, stamping lead coat & lead plate, housing assembly & inspection, lacing assembly)
  • Perform oil filing (oil line filter assembly, oil cooler, oil filing, oil cleaning, oil cooler assembly, expansion tank assembly, operate Mica fluid Oil purification system, electrical safety test & leakage test for oil cooler).
  • Perform inner assembly for HR12 & HR14 (heating transformer assembly, anode assembly, cathode assembly, complete assembly).
  • Perform external assembly for HR12 & HR14 (set assembly & ATU assembly).
• IMS
  • Perform assembly process for all IMS products (wash & bake, swab assembly, pen assembly, token assembly, condenser assembly, calibrant assembly, reactant assembly, membrane assembly).
  • Perform QC testing for all IMS products (cleanliness & sensitivity).
• GENERAL
  • Maintain cleanliness and compliance with safety and quality protocols.
  • Participate in continuous improvement activities related to production efficiency and quality.
  • Other duties as required.
  You are authorized to act within the jurisdiction and capacity in your job scope to deliver the results/output expected of your job function.

Qualifications

Education:

• SPM or equivalent.

Experience:

• Fresh / minimum 1 year experience in a similar role in an engineering/ manufacturing or related industry preferred.

Knowledge/Skills:

• Minimal prior experience in the role; training will be provided.
• Grasps general concepts of the position, with exposure to some detailed aspects.
• Basic competency with opportunities to build expertise through experience.
• None

Additional Information

Join us and we’ll help build your career, with excellent training and opportunities for career growth across the business, both locally and globally. You’ll experience an inclusive environment, with strong leadership and a focus on safety and wellbeing. You’ll also have the flexibility to choose from a wide range of benefits to suit your lifestyle, offering you and your family support from a health and wellbeing, financial andlifestyle perspective.

Join us and work for a world-leader, with the benefits and training to reward your dedication and skills. Be part of a team where we are making the world a safer place.

We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity.

At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc )

#J-18808-Ljbffr

Every minute of every day, Smiths Detection’s threat detection and security screening technology helps to protect people and infrastructure, making the world a safer place. Smiths Detection, part of Smiths Group is a global leader in the development, manufacture and management of security and detection solutions designed to make the world a safer place. Our technology provides threat detection and screening solutions for customers in our key markets: aviation, ports and borders, defence, and urban security. Our expertise spans 21 global offices, seven manufacturing sites and five R&D centres, with a global network of 3,000 dedicated colleagues contributing towards over 40 years at the frontline of advances in safety and security. This results in careers built on variety and the opportunity to work on a range of state-of-the-art solutions, where you can develop your knowledge and experience every day. Job Description

SUMMARY OF ESSENTIAL FUNCTIONS: The Assembly Operator performs complex assembly using machinery, tools and equipment. The role includes following detailed instructions and conducting standard quality control (QC) testing. SPECIFIC DUTIES, ACTIVITIES AND RESPONSIBILITIES

INCLUDE BUT ARE NOT LIMITED TO : CXS

Perform machine assembly (wiring, generator, detector). Perform Final Assembly that is done after cross check completed including obtaining approval from RPO.

GENERATOR

Perform inner assembly process for all models of generator (material preparation & jumper, tube & cap assembly, sub-inner assembly, inner assembly & inspection). Perform offline preparation to support generator assembly line (lead shielding, stamping lead coat & lead plate, housing assembly & inspection, lacing assembly) Perform oil filing (oil line filter assembly, oil cooler, oil filing, oil cleaning, oil cooler assembly, expansion tank assembly, operate Mica fluid Oil purification system, electrical safety test & leakage test for oil cooler). Perform inner assembly for HR12 & HR14 (heating transformer assembly, anode assembly, cathode assembly, complete assembly). Perform external assembly for HR12 & HR14 (set assembly & ATU assembly).

IMS

Perform assembly process for all IMS products (wash & bake, swab assembly, pen assembly, token assembly, condenser assembly, calibrant assembly, reactant assembly, membrane assembly). Perform QC testing for all IMS products (cleanliness & sensitivity).

GENERAL

Maintain cleanliness and compliance with safety and quality protocols. Participate in continuous improvement activities related to production efficiency and quality. Other duties as required. You are authorized to act within the jurisdiction and capacity in your job scope to deliver the results/output expected of your job function. Qualifications

Education: SPM or equivalent. Experience: Fresh / minimum 1 year experience in a similar role in an engineering/ manufacturing or related industry preferred. Knowledge/Skills: Minimal prior experience in the role; training will be provided. Grasps general concepts of the position, with exposure to some detailed aspects. Basic competency with opportunities to build expertise through experience. None Additional Information

Join us and we’ll help build your career, with excellent training and opportunities for career growth across the business, both locally and globally. You’ll experience an inclusive environment, with strong leadership and a focus on safety and wellbeing. You’ll also have the flexibility to choose from a wide range of benefits to suit your lifestyle, offering you and your family support from a health and wellbeing, financial andlifestyle perspective. Join us and work for a world-leader, with the benefits and training to reward your dedication and skills. Be part of a team where we are making the world a safer place. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc )

#J-18808-Ljbffr

Assembly Operator (Job ID: R0074594) – Sandvik Equipment Sdn Bhd

Are you an experienced electrical or mechanic professional who is passionate to learn and develop within the role in a high-tech company with origin from Sweden? If the answer is yes, keep reading as this may be just the right position for you.

We are looking for a proactive Assembly Operator for our newly established assembly factory in Seremban - Sendayan Techvalley for the underground load & haul equipment.

Do we share the same goals?

In this position you are primarily responsible for assembly operation (technical – electrical, mechanical), including preparation to the production requirement. Primary focus working areas:

• Wire, assemble and install electrical & electronic components according to specification
• Assembly of mechanical, hydraulic, and electrical components for heavy machineries according to assembly drawings, specifications, and work instruction
• Examine products / machines and oversee diagnostic tests to determine functionality problems
• Identify and conduct minor repair to mechanical components
• Able to read & understand electrical & mechanical terminology, drawings, and hydraulic diagram
• Able to read and interpret electrical drawing and experience in panel and circuit wiring
• Conduct minor inspection on mechanical & electrical components during assembly
• Familiar with and able to use electrical & mechanical assembly tools
• Ensure Sandvik Way of Working procedures are in place and always adhered to
• User level experience with ERP system and MS office applications is seen as advantage
• Teamwork skills, disciplined, proactive approach to work and readiness to work in shifts
• Meticulous to quality requirement and EHS procedures
• Battery operations / technology background considered an advantage

Your background and what we find important

This role would be ideal for someone looking for a new challenge and further become an expert in the assembly area. As a person you have excellent communication skills, able to follow instructions and deliver as required, work in a team and independent with minimum supervision, fluently speak English with a minimum 5 years of experience in heavy machineries assembly or equivalent, certificate from technical & vocational institutions, forklift, lift-truck, over-head cranes operation & safety licenses.

What’s in it for you?

We offer you an interesting role in an international business environment as well as opportunities for your professional development. At Sandvik, we embrace Core Values of Customer Focus, Innovation, Passion to Win and Fair Play by providing an equal opportunity, drug-free employment, committed to promoting a diverse and inclusive community - a place where we can all be ourselves, thrive and develop. To help embed inclusion for all, from day one, we offer a range of family friendly, inclusive employment policies, flexible working arrangements and employee networks to support staff from different backgrounds.

We believe that diversity of experience, perspective and background will lead to a better environment for our employees, our business and, thereby, our customers.

Want to join our team?

Job ID: R0074594. Submit your application latest by March 31, 2025. Please note that we are processing the applications already during the application period. Read about Sandvik and apply at

About us

Sandvik is a global, high-tech engineering group providing solutions that enhance productivity, profitability and sustainability for the manufacturing, mining, and infrastructure industries. We are at the forefront of digitalization and focus on optimizing our customers’ processes. Our world-leading offering includes equipment, tools, services and digital solutions for machining, mining, rock excavation and rock processing. In 2023 the Group had approximately 41,000 employees and revenues of about 127 billion SEK in about 170 countries within continuing operations.

Sandvik – we make the shift! Advancing the world through engineering

#J-18808-Ljbffr

Responsibilities

• To manage and control section to achieve target as per plan in terms of SQCDM.
• To commit and support to the overall implementation of Management System (9001/14001/145001).
• To promote & inculcate Safety, Health, Environment and Quality awareness among the workforces.
• To ensure all member attend as per plan, approved all member overtime, annual leave planning and TM welfare
• Perform other duties whenever required.
  
  

Requirements

• Possess a Degree in related Engineering field (Automotive/Manufacturing/Mechanical or etc.) and at least 1 or 2 years relevant working experience.

#J-18808-Ljbffr

Why Join ResMed?

• Global Impact & Meaningful Mission : Your work will directly contribute to improving the lives of millions of people living with conditions like sleep apnea, COPD, and other chronic health issues. At ResMed, we’re not just creating devices—we're transforming lives.

• Innovation-Driven Culture : As a leader in digital health and connected medical devices, innovation is at the heart of what we do. It's not just a buzzword here—it's the foundation of how we approach every challenge.

• Career Growth & Development : Whether you're just starting out or an experienced professional, ResMed offers clear career development paths, cross-functional opportunities, and a platform to make a significant impact.

• Purpose-Led Values : We are guided by a deep commitment to sustainability, diversity, and improving the communities we serve. At ResMed, you'll have the chance to make a difference both inside and outside the workplace.

• Collaborative & Inclusive Environment : Join a team of smart, passionate professionals who are eager to collaborate. We embrace a diverse, inclusive, and supportive culture where every voice is heard.

• Cutting-Edge Technology : Work with the latest technologies—from cloud-connected devices to AI-driven insights—that are changing healthcare and improving outcomes for real people.

• Wellness & Flexibility : We value work-life balance and offer flexible hybrid work options (for most roles), wellness programs, and a healthy work culture that promotes personal well-being.

• Competitive Benefits : ResMed offers competitive compensation, bonus programs, health and wellness benefits, employee stock purchase plans, and more.

• Award-Winning Employer : ResMed has been recognized globally as a top employer, innovator, and leader in the medical device industry.

Overview
The primary function of the Production & Assembly team is to manufacture, assemble, and pack products. Key deliverables include managing daily production and planning functions, supporting changing demands, programming, setting up, and monitoring production equipment and processes, and performing assembly operations. Additionally, this role involves conducting quality control checks on incoming materials and finished goods while ensuring compliance with ResMed’s Quality, OH&S, GMP policies, and regulatory requirements.

Responsibilities

The Manufacturing Technician role, specialized within the Production & Assembly job family, focuses on supporting tooling, plant, and equipment in the factory by performing maintenance activities and documenting equipment calibration systems.

Key Responsibilities

• Support the development of methods and procedures to control or modify the manufacturing process.

• Maintain, repair, and calibrate manufacturing equipment.

• Perform quality control checks on incoming materials and finished products.

• Support clerical, administrative, or technical tasks within an office or field setting.

• Assist in specialized technical tasks or skilled craft work as required.

• Engage in unskilled or semi-skilled operational tasks as necessary.

• Act as an informal resource for colleagues with less experience.

• Work independently and contribute to team objectives, ensuring smooth operation and problem resolution.

Qualifications and Experience

Required:

• Diploma or Certificate in a relevant field.

• Minimum of 2 years of related experience in manufacturing, maintenance, or similar roles.

• Detailed knowledge of procedures and administrative processes, with the initiative to handle non-routine situations and conflicts.

• Ability to identify key issues and patterns from partial or conflicting data

Preferred:

• Additional certifications or specialized training in relevant manufacturing processes or equipment maintenance.

• Experience in a regulated manufacturing environment, particularly within quality control or compliance roles.

Joining us is more than saying “yes” to making the world a healthier place. It’s discovering a career that’s challenging, supportive and inspiring. Where a culture driven by excellence helps you not only meet your goals, but also create new ones. We focus on creating a diverse and inclusive culture, encouraging individual expression in the workplace and thrive on the innovative ideas this generates. If this sounds like the workplace for you, apply now! We commit to respond to every applicant.

#J-18808-Ljbffr

Why Join ResMed? Global Impact & Meaningful Mission : Your work will directly contribute to improving the lives of millions of people living with conditions like sleep apnea, COPD, and other chronic health issues. At ResMed, we’re not just creating devices—we're transforming lives.

Innovation-Driven Culture : As a leader in digital health and connected medical devices, innovation is at the heart of what we do. It's not just a buzzword here—it's the foundation of how we approach every challenge.

Career Growth & Development : Whether you're just starting out or an experienced professional, ResMed offers clear career development paths, cross-functional opportunities, and a platform to make a significant impact.

Purpose-Led Values : We are guided by a deep commitment to sustainability, diversity, and improving the communities we serve. At ResMed, you'll have the chance to make a difference both inside and outside the workplace.

Collaborative & Inclusive Environment : Join a team of smart, passionate professionals who are eager to collaborate. We embrace a diverse, inclusive, and supportive culture where every voice is heard.

Cutting-Edge Technology : Work with the latest technologies—from cloud-connected devices to AI-driven insights—that are changing healthcare and improving outcomes for real people.

Wellness & Flexibility : We value work-life balance and offer flexible hybrid work options (for most roles), wellness programs, and a healthy work culture that promotes personal well-being.

Competitive Benefits : ResMed offers competitive compensation, bonus programs, health and wellness benefits, employee stock purchase plans, and more.

Award-Winning Employer : ResMed has been recognized globally as a top employer, innovator, and leader in the medical device industry.

Overview The primary function of the

Production & Assembly

team is to manufacture, assemble, and pack products. Key deliverables include managing daily production and planning functions, supporting changing demands, programming, setting up, and monitoring production equipment and processes, and performing assembly operations. Additionally, this role involves conducting quality control checks on incoming materials and finished goods while ensuring compliance with

ResMed’s

Quality, OH&S, GMP policies, and regulatory requirements. Responsibilities The

Manufacturing Technician

role, specialized within the

Production & Assembly

job family, focuses on supporting tooling, plant, and equipment in the factory by performing maintenance activities and documenting equipment calibration systems. Key Responsibilities Support the development of methods and procedures to control or modify the manufacturing process.

Maintain, repair, and calibrate manufacturing equipment.

Perform quality control checks on incoming materials and finished products.

Support clerical, administrative, or technical tasks within an office or field setting.

Assist in specialized technical tasks or skilled craft work as required.

Engage in unskilled or semi-skilled operational tasks as necessary.

Act as an informal resource for colleagues with less experience.

Work independently and contribute to team objectives, ensuring smooth operation and problem resolution.

Qualifications and Experience Required: Diploma

or

Certificate

in a relevant field.

Minimum of

2 years

of related experience in manufacturing, maintenance, or similar roles.

Detailed knowledge of procedures and administrative processes, with the initiative to handle non-routine situations and conflicts.

Ability to identify key issues and patterns from partial or conflicting data

Preferred: Additional certifications or specialized training in relevant manufacturing processes or equipment maintenance.

Experience in a regulated manufacturing environment, particularly within quality control or compliance roles.

Joining us is more than saying “yes” to making the world a healthier place. It’s discovering a career that’s challenging, supportive and inspiring. Where a culture driven by excellence helps you not only meet your goals, but also create new ones. We focus on creating a diverse and inclusive culture, encouraging individual expression in the workplace and thrive on the innovative ideas this generates. If this sounds like the workplace for you, apply now! We commit to respond to every applicant.

#J-18808-Ljbffr